M12 Laser Emitter Series - BANNER ENGINEERING - #1

Text version of the page

M12 Class 1 Laser Emitter IEC Class 1 Laser for use with Banner modulated receivers Printed in USA 10/03 P/N 53808 rev. B • A low-power device emitting a visible red beam (650 nm wavelength). • Beam is bore-sighted to within 2 milliradians and 0.25 mm of the housing centerline. • Collimated, apertured beam is 2mm diameter with divergence of less than 1 milliradian. • Compatible with a variety of Banner modulated photoelectric receivers (see Excess Gain chart, page 3). • Useful for medium-range sensing, or for sensing very small objects or profiles; excellent mechanical repeatability in position-sensing applications. • Smooth-barrel aluminum housing is suitable for a precision mount. • Available with unterminated, 2 m (6.5') cable or 150 mm (6") pigtail, quick-disconnect cable • Modulated beam (33kHz, 25% duty cycle) • 57 mm (2.25") long overall • 10 to 30V dc operation Effective Beam at Receiver Opposed Beam Models Range Cable* Distance Width Supply Voltage Excess Gain M126E1LD Range varies, depending on which receiver is used (see Excess Gain chart, page 3). 2m (6.5') Unterminated 10-30V dc See chart on page 3. at 25ºC 1.5 m (5') 3.5 mm (0.14") 3 m (10') 5.5 mm (0.2") 6 m (20') 8.5 mm (0.3") 15 m (50') 18 mm (0.7") M126E1LDQ 30 m (100') 32 mm (1.3") 150 mm (6") Pigtail with 3-wire Pico-style QD connector *9 m (30') cables are available by adding suffix “W/30” to the model number to the cabled version (e.g., M126E1LD W/30). A model with a QD connector requires an accessory mating cable. See page 6. Features and Benefits CAUTION . . . Never stare directly into the emitter lens. Laser light can damage your eyes. Avoid placing any mirror-like object in the beam. Never use a mirror as a target. (See Figure 5.) WARNING . . . Not To Be Used for Personnel Protection Never use these products as sensing devices for personnel protection. Doing so could lead to serious injury or death. These sensors do NOT include the self-checking redundant circuitry necessary to allow their use in personnel safety applications. A sensor failure or malfunction can cause either an energized or de-energized sensor output condition. Consult your current Banner Safety Products catalog for safety products which meet OSHA, ANSI and IEC standards for personnel protection. Models