Fiber Optic Systems - BANNER ENGINEERING - (Version JPG) - Page n° 19 - PDF Catalogue | Technical Documentation

See other catalogues for BANNER ENGINEERING

Retro-reflective sensor, Indicator light, Label sensor, Safety light curtain, Interlock switch

Text version of the page

FI22 Expert™ Series

Fiber Systems

FI22 Expert™, 10-30V dc

o o

m rm O ^H

Sensing Mode/LED*

Output Type

Excess Gain

Beam Pattern

Data

Sheet

Cable**

Models

Range

Opposed mode: EGCP-42, EGCP-43 &

EGCP-44

(p. 449)

Diffuse mode: EGCP-45,

EGCP-46 &

EGCP-47

(p. 449)

Opposed mode:

BPP-36, BPP-37 & BPP-38

(p. 467)

Diffuse mode: BPP-39,

BPP-40 & BPP-41

(p. 467)

FI22FP

2 m

Range varies by sensing mode and fiber optics used. See data

sheet part number 108899 for maximum

range specifications.

D-H

□=!=>

PLASTIC FIBER

Bipolar

NPN/PNP

108899

FI22FPQ

6-pin Pico QD

—► Visible Red LED

For 9 m cable, add suffix W/30 to the 2 m model number (example, FI22FP W/30). A model with a QD requires a mating cable (see page 379).


	*FI22 Expert™* Specifications**
	Supply Voltage	10 to 30V dc (10% max. ripple) @ less than 32 mA exclusive of load
	Supply Protection Circuitry	Protected against reverse polarity, over voltage, and transient voltages
	Delay at Power Up	250 milliseconds max.; outputs do not conduct during this time
	Output Configuration	Bipolar: 1 current sourcing (PNP) and 1 current sinking (NPN)
	Output Rating	100 mA max. load @25° C (derate 1 mA per ° C increase) OFF-state leakage current: less than 50 at 30V dc ON-state saturation voltage: NPN: less than 200 mV @ 10 mA and 1V @ 100 mA load PNP: less than 1.5V @ 10 mA and 2.0V @ 100 mA load
	Output Protection	Protected against output short-circuit, continuous overload, transient over-voltages, and false pulse on power up
	Output Response Time	500 microseconds
	Repeatability	100 microseconds
	Adjustments	2 push buttons and remote wire • Expert TEACH programming (two-point static, dynamic and single-point static) • Manually adjust (+/-) thresholds (from buttons only - not available from remote wire) • LO/DO and OFF Delay configurable (from buttons or remote wire) • Push-button lockout (from remote wire only)
	Indicators	8-segment red bargraph: Light-to-dark signal difference relative to taught condition (single-point TEACH) Sensing contrast (two-point TEACH) Green LED: Power ON Yellow LED: Output conducting
	Construction	PC/ABS blend plastic housing; polycarbonate cover
	Environmental Rating	IP67; NEMA 6
	Connections	5-conductor 2 m PVC cable, 9 m PVC cable, or 6-pin integral Pico-style quick-disconnect fitting. QD cables are ordered separately. See page 379.
	Operating Conditions	Temperature: -10° to +55° C Relative humidity: 90% @ 50° C (non-condensing)
	Certifications	C € c^lus
	Hookup Diagrams	DC11 (p. 478)

More information online at bannerengineeringxrarn 181

Fiber Optic Systems - BANNER ENGINEERING - #19

Retro-reflective sensor, Indicator light, Label sensor, Safety light curtain, Interlock switch