ECONO-BEAM SE61 Series, ac models - BANNER ENGINEERING - #1

Text version of the page

ECONO-BEAM® Diffuse-Mode Sensors for 120V ac operation Printed in USA P/N 37429A0A ECONO-BEAM® Diffuse-Mode Features • Small, low-cost, self-contained sensors engineered to provide reliable sensing, primarily in straight-forward OEM applications • Simple installation with no adjustments • 200 mm (8") sensing range • 120V ac operation • Totally solid-state and epoxy-encapsulated for unlimited life • SPST solid-state (FET) output switch rated at 300 milliamps • Choose models for light operate or dark operate • Very compact, yet rugged enough to withstand tough sensing environments; rated IP66, NEMA 4X • 2 m (6.5') is standard cable length; 9 m (30') cables also available WARNING . . . Not To Be Used for Personnel Protection Never use these products as sensing devices for personnel protection. Doing so could lead to serious injury or death. These sensors do NOT include the self-checking redundant circuitry necessary to allow their use in personnel safety applications. A sensor failure or malfunction can cause either an energized or de-energized sensor output condition. Consult your current Banner Safety Products catalog for safety products which meet OSHA, ANSI and IEC standards for personnel protection. ! Infrared, 880 nm ECONO-BEAM Diffuse-Mode AC Models 200 mm (8") 2 m (6.5') 1 10 100 10 mm 0.4 in 100 mm 4.0 in 1000 mm 40 in 1.0 mm 0.04 in 1000 EXCESS GAIN DISTANCE Diffuse Mode 250 mm 10.0 in 200 mm 8.0 in 150 mm 6.0 in 100 mm 4.0 in 50 mm 2.0 in 0 0 2.5 mm 5.0 mm 7.5 mm 2.5 mm 5.0 mm 7.5 mm 0 0.1 in 0.2 in 0.3 in 0.1 in 0.2 in 0.3 in DISTANCE Diffuse Mode Models Range Cable* Supply Voltage Output Type Excess Gain Beam Pattern 120V ac SPST Solidstate LO SE61AW1D SE61RW1D 2 m (6.5') SPST Solidstate DO Performance based on 90% reflectance white test card *9 m (30') cables are available by adding suffix “W/30” to the model number of any cabled sensor (e.g. - SE61AW1D W/30)