D10 Expert - Small Object Counter - BANNER ENGINEERING - #1

Text version of the page

Printed in USA 05/09 P/N 146132 rev. B D10 Expert™– Small Object Counter Advanced sensor for small object counting WARNING . . . Not To Be Used for Personnel Protection Never use these products as sensing devices for personnel protection. Doing so could lead to serious injury or death. These sensors do NOT include the self-checking redundant circuitry necessary to allow their use in personnel safety applications. A sensor failure or malfunction can cause either an energized or de-energized sensor output condition. Consult your current Banner Safety Products catalog for safety products which meet OSHA, ANSI and IEC standards for personnel protection. Models Features • Easy-to-set selectable threshold with automatic compensation algorithm • Automatic compensation algorithm compensates for dust or contamination on the fiber optic array and for ambient temperature changes • 16-bit microcontroller and 12-bit Analog-to-Digital converter (ADC) for highperformance, low-contrast sensing • Easy-to-read 4-digit display for Health Mode, Percentage Blocked, Signal Level, or Counter Mode readout, plus indicators for a continuous readout of operating status (user configurable) • Sleek, ultra-slim 10 mm housing, mounts to a standard 35 mm DIN rail • Single discrete output plus Health Mode output to indicate preventative maintenance is required • Three-mode power and speed selection to optimize detection reliability • Dynamic event stretcher to ensure one output per event — especially for gel-cap style pills • Visible red (680 nm) sensing beam • Models available with 2 m or 9 m (6.5' or 30') cable or integral Pico-style quick-disconnect * 9 m (30') cables are available by adding suffix “W/30” to the model number of any cabled sensor (e.g., D10DNCFP W/30). A model with a QD connector requires a mating cable (see page 14). ** Custom fiber arrays and mounting configurations are possible. Consult factory for assistance with your small object counting application. † With 2% Threshold Offset Percentage Sensors Models Cables* Discrete Outputs D10DNCFP 2 m (6.5') Cable NPN D10DNCFPQ 6-pin Pico-style QD D10DPCFP 2 m (6.5') Cable PNP D10DPCFPQ 6-pin Pico-style QD Fiber Optic Arrays Models** Detection Window Dimensions Fiber Exit Minimum Object Size† PFCVA-10X25-S 10 mm x 25 mm Side exit 1.5 mm PFCVA-10X25-E End exit PFCVA-25X25-S 25 mm x 25 mm Side exit 3 mm PFCVA-25X25-E End exit PFCVA-34X25-S 34 mm x 25 mm Side exit 4 mm PFCVA-34X25-E End exit