All BANNER ENGINEERING CORP. catalogues and technical brochures

P. 1

Vision LightingFIRST EDITION

P. 2

Advanced Vision Lighting Solutions from Banner. Area Lights►Linear Array Lights► On-Axis Lights  u   Provides even illumination in a Provides high-intensity illumination of Provides collimated illumination...

P. 3

ContentsBanner is the name to trust for allyour lighting needs.There are many boutique lightingsuppliers, but few can claim Banner’s 40 plusyears of LED design experience, rigorousquality control, excellent sales support andcost-effective solutions....

P. 4

Linear array lights illuminate large objects. Durable linear array lights provide highintensity lighting for challenging applications or for multiple areas of interest on largeobjects, such as the spot welds and cutouts on an automotive panel.Reliable...

P. 5

Optimize maximum contrast with backlighting Because the large red backlight creates maximum contrast, its use can boost the reliability of a high-speed inspection of facial tissue boxes. The vision sensors signals the controller if the end-flaps...

P. 1

R-GAGE™QT50R SensorsReliable sensing usingcutting-edge radar technologyTrue-presenceradar pairedwith exceptionalenvironmental resistanceAn innovative solution for a widevariety of outdoor and otherchallenging applications▶C argo positioning...

P. 2

R-GAGE QT50R Models, 12 to 30V dc™ModelsTelecom ApprovalCable*OutputData SheetDetailedDimensions74.1 mm46.1 mmFCC part 15approved for USand CanadaQT50RAF-USQT50RAF-EURangeDimensionsDownloadPDFEurope except Franceand UK15 mQT50RAF-UK2m100.2 mm135460SelectableNO...

P. 1

Wireless Q45PhotoelectricSensorsSecureFlexibleReliableScalableSelf-contained

P. 2

The first self-contained, wireless photoelectric sensor solutionWireless photoelectrics that meetthe demands of industrySolve challenging factory applications or addsensing to existing industrial systems. BannerSureCross® Wireless Q45 Sensor is the...

P. 3

from the first name in photoelectrics.SENSING UNPLUGGED®Where can you use wireless sensing?SureCross Wireless Q45 Photoelectric Sensors are ideal for manyconventional photoelectric presence/absence, alignment, position, counting,monitoring and detection...

P. 4

Next-generation technology fromthe leader in sensing. Banner.Dock/Traffic StatusSureCross from Banner is the only wireless networkdeveloped from the ground up and exclusively forthe demands of industrial automation. The WirelessQ45 Sensor represents the...

P. 5

Wireless Q45 Sensors((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((Two Point System-B2Q Gateway supports one or two sensors((((((((((((((((((((((( ((((((((((((((((((((Six...

P. 1

OMNI-BEAMQ45UPGRADABLEPhotoelectric Sensor

P. 2

Q45 The sensor you’ll use today. The sensor you must have tomorrow.A basic low-cost sensor. Thestandard Q45 is a basic on-off sensoravailable at a very low price. But evenin its most basic form, the Q45makes your job easier with a host ofadvanced...

P. 3

Q45 A sensor so advanced, it will accommodate technologies yet to be invented.A board for every function youneed, today and tomorrow. Circuitboard modules instantly plug in fordelay and one-shot timers and numerous fieldbuses including DeviceNet ™,SDS™...

P. 4

Q45 Down to earth features that save you money on the factory floor.Flexible, modular timing functions.Timing modules can be added at anytime and four simple switches on themodule program the output logicfunction, the timing range and theoutput state....

P. 5

Q45 A sensor that meets your specific application requirements.Glass and plastic fiber optics.Banner has the widest range of fiberoptics available, and they can all beused with the Q45. Reach placesinaccessible to conventional sensors,withstand high temperatures,...

P. 1

©ftBSSfNBPLUS Vision Sensors & Lighting THIRD EDITION

P. 2

New models to solve your toughest inspection challenges.PresencePLUS® Pro & P4 COLOROffers color sensing in twoconvenient packages.Page 8Ruggedized Pro Cameras & LightsDelivers all the functionalityand features of advanced visioninto harsh...

P. 3

ContentsWhen the world thinks of sensors,it thinks of Banner.PresensePLUS Vision Sensing 4Machine Vision Solutions 6With more than 17,000 photoelectric,ultrasonic and vision sensors, and safetyproducts available worldwide, Banner is themost innovative,...

P. 4

Advanced vision solutions from the number one name in sensors.Vision sensing from the source you trust.As the prefered brand of sensors worldwide, Bannerknows the challenges of the factory floor. That’s why wedesigned our line of PresencePLUS®...

P. 5

Affordable sensing technologythat’s easy to use.The best value in vision.• best price-performance ratio brings full visionThecapabilities to all sensor specifiers.• Simple, easy-to-use interface.• Easy to justify cost for multiple...

P. 1

PICO-GUARD™™Fiber OpticSafety Interlock System

P. 2

PICO-GUARD : A revolutionary safety system combining fiber optics with control reliability.TMTMNon-contact. Eliminates interlock wiring.The patent pending PICO-GUARDTM system is a unique combination of control-reliable,non-contacting photoelectric and...

P. 3

PICO-GUARD : All the features & components you need for your applications.TMTMPICO-GUARD optical elements areavailable in numerous configurations.Fiber optic safety interlock switches are available tosolve numerous applications. They allow easy installationand...

P. 4

Advanced, solid-state controller with four optical channels.Three non-safety signal outputs:auxiliary, weak signal and faultSystem ResetRemote display options includeRS-232 connection for systemstatus and diagnostic informationRemovable terminalblocks...

P. 5

Universal Safety Stop Interface provides the ultimate in connectivity.Rope-Pull E-StopsSafety Light ScreensE-Stop ButtonsPatent-pending Universal Safety Stop Interface (USSI) for connectingmultiple PICO-GUARDTM controllers.Banner’s incredibly flexible...

P. 1

MINI-BEAM 2®®Photoelectric Sensors

P. 2

The new MINI-BEAM®2 : The natural evolution of the world’s most popular sensor.A new level of miniaturization.*Introduced in 1985, the original MINI-BEAM® has become the world’s most popularminiature photoelectric sensor. With millions...

P. 3

Push-button sensitivity adjustments make setup faster & easier.Digital gain adjustment.Advanced MINI-BEAM2 sensors offer a digital gain adjustment that uses asingle push button to streamline installation and setup. Programming ofsensitivity (excess...

P. 4

The new MINI-BEAM®2 : All the features you need for maximum performance.Switch 150 mA loads, NPN or PNP outputs.Now you can switch larger loads with smallersensors. Despite their tiny size, 10 to 30V dcMINI-BEAM2 sensors have the power to switch...

P. 5

MINI-BEAM®2 Sensor ApplicationsLEAD FRAME DETECTIONObjective:Sensor:To detect the presence of an integrated circuitlead frame.QS12VN6WOperation: The wide beam angle of the divergent optics sensesthe lead frame, even in the areas where most of themetal...

P. 1

BA-885 MINI-BEAM Broc.10/28/9810:28 AMPage 2®®MINI-BEAM ExpertPhotoelectric Sensors™™

P. 2

BA-885 MINI-BEAM Broc.10/28/9810:29 AMPage 3The world’s most popular photoelectric is now the world’s smartest.MINI-BEAM®: Millions of sensors in use.The MINI-BEAM is the world’s most popular miniaturephotoelectric sensor. With...

P. 3

BA-885 MINI-BEAM Broc.10/28/9810:30 AMPage 4®™MINI-BEAM® Expert ™: Push one button to solve your toughest applications.Precise, low-contrast sensitivity adjustments.The MINI-BEAM Expert recognizes the most difficult low-contrastsensing...

P. 4

BA-885 MINI-BEAM Broc.10/28/9810:32 AMPage 5®™MINI-BEAM® Expert ™: Advanced features improve performance & make your job easier.Remote programming for convenience and greater security.Wherever they are mounted, one or more MINI-BEAM...

P. 5

BA-885 MINI-BEAM Broc.10/28/9810:32 AMPage 6®™MINI-BEAM ®Expert ™ Sensor ApplicationsCLEAR BOTTLE COUNTINGObjective: To reliably count clear bottles moving on a high-speedconveyor line.Sensor: SME312LPCOperation: The polarized retroreflective...

P. 1

Micro Screen Brochure/BA-8496/4/98 2:03 PMPage 2MICRO-SCREEN™Safety Light Screens

P. 2

Micro Screen Brochure/BA-8496/4/98 2:05 PMPage 3™™MICRO-SCREEN : The smallest, most esthetic safety light screens.The perfect match for your equipment.Banner’s new MICRO-SCREEN™ safety light screen system is notonly attractive,...

P. 3

Micro Screen Brochure/BA-8496/4/98 2:07 PMPage 4™™MICRO-SCREEN : The industry’s biggest light screen features.A choice of advanced controllers.Choose a full-size black metal enclosure, or a compact35 mm DIN-rail-mountable enclosure that...

P. 4

Micro Screen Brochure/BA-8496/4/98 2:07 PMPage 5The light screen system that gets on the bus.DeviceNet™Complete system monitoring onDeviceNet fieldbus networks.This unique MICRO-SCREEN™ system isfully compatible with the DeviceNet™fieldbus,...

P. 5

Micro Screen Brochure/BA-8496/4/98 2:08 PMPage 6Vastly superior diagnostics.Bright, easily-visible status indication from three sides.Bright LED indicators on MICRO-SCREEN™ emitters and receivers aresignificantly brighter than other systems, to...

P. 1

L-GAGE™™Laser Gauging Sensors

P. 2

L-GAGE™: A new paradigm for precision laser measurement.Unique,* self-contained design replaces large, cumbersome systems.Laser gauging sensors are typically large, two-piece systems, and are difficult touse. The new Banner L-GAGE has changed all...

P. 3

L-GAGE™: The world’s first teachable laser sensor.75mm(2.to9"m")5m4.912toDefine your own custom sensing windowby simply pushing a button.Unlike older, inflexible, fixed-range technology, Banner’sunique TEACH-mode programming allows you...

P. 4

L-GAGE™: Advanced features help you solve more applications.Fast LED:1.0 ms responseAdvanced diagnostics.L-GAGE sensors keep youconstantly informed ofoperating status throughoutprogramming and operation.Sensors also include an alarmoutput for signal...

P. 5

L-GAGE™ Laser Sensor ApplicationsWOOD PROFILINGProfile wood moldings; inspect milled dimensions.DATSPEEDLASER LIGHTDO NOT STARE INTO BEAMCLASS 2 LASER PRODUCTAvoid exposure laser light emittedfrom his apertureRADIANT POWER 0.15 mW8KHz 8-16% DUTY...

P. 1

more sensors, more solutions EZ-LIGHT Indicator Lights and Pick-to-Light Sensors SECOND EDITION

P. 2

Banner lights the way for Lean manufacturing.A level of reliable operator guidance or simple indication. Easily installs and operates withvirtually no maintenance—using as little energy as possible.2

P. 3

Beyond Andon: EZ-LIGHT™, the next generation of visual indicationBanner’s EZ-LIGHT™ family of products provides numerous solutions for visual process managementand operator guidance. From innovative multi-color indicator lights to pick-to-light...

P. 4

EZ-LIGHT™ Product FeaturesExample ApplicationsA complete range of models and styles• mart General-Purpose indicators displaying up to three colors in one deviceS• ulti-Function indicators displaying up to five colors with solid, flashing...

P. 5

Robust, durable, green and Lean design • Completely self-contained operation—no controller needed • Extremely long-lasting LED technology providing >100,000 hours (11 years continuous) working life • Very low power...

P. 1

AG4 Safety Laser ScannerDependable and FlexibleSafeguardingTwo-Zone MonitoringAccess MonitoringA single device for stationary and mobilesafeguarding applicationsCollision AvoidanceFully Configurable SafeguardingThe Banner AG4 is a two-dimensional optical...

P. 2

AG4-4E Safety Laser Scanner, 24V dcRangeModelProtective FieldsWarning FieldsSafetyOutputAux.OutputScanningAngleResponseTimeDataSheet30 mm Resolution = 1.6 mAG4 Soft Manual14492340 mm Resolution = 2.20 mAG4-4E150 mm Resolution = 15 m50 mm Resolution =...

P. 1

™MINI-ARRAYMeasuring Light Screen System

P. 2

™MINI-ARRAYMeasuring Light Screen SystemMINI-ARRAY FeaturesAdvanced MINI-ARRAY software†includes on-screen displays forerror/diagnostic analysis and sensoralignment.Emitters and receivers are available inarray lengths ranging from 6 inches...

P. 3

™MINI-ARRAYMeasuring Light Screen SystemMINI-ARRAY Programming FeaturesMeasurement ModesThe MAC-1 controller is a highlyversatile microcontroller-based module.It is configured using the suppliedBanner software via its built-in RS-232interface, using...

P. 4

™MINI-ARRAYMeasuring Light Screen SystemMINI-ARRAY ScanningScanning ModesThe control module may be configuredfor any one of four scanning modes:Straight Scan is the default mode. Allbeams are scanned in sequence fromthe cable end to the opposite...

P. 5

™MINI-ARRAYMeasuring Light Screen SystemMINI-ARRAY DimensionsHousing LengthL1(mm)(inch)SensorModelsArray LengthY (16 beams/ft)(mm)(inch)Array LengthY (32 beams/ft)(mm)(inch)BMEL6..A emitterBMRL6..A receiver2017.91435.621335.25BMEL12..A emitterBMRL12..A...

P. 1

Accessories Brackets page 620 • A wide selection of bracket styles for easy installation and optimum performance • Swivel brackets for greater range of motion and flexibility...

P. 2

BRACKETS CORDSETS RETROREFLECTORS MISCELLANEOUS Banner Bracket Selection Chart SENSORSWORLD-BEAM® Q12 'lpage 601SMBQ12A SMBQ12Tpage 667 page 667M12page 64 I'#SMB12FA.. SMB12MM SMBQS12PDpage 636 page 636 page 669page 68 ^W*'SMB8MMpage...

P. 3

Banner Bracket Selection Chart Accessories TM18 fo^gpage 140SMB18A SMB18AFA.. SMB18ATFA.. SMB18FA.. SMB18Q SMB18UR SMB312PDpage 637 page 637 page 637 page 638 page 638 page 639 page 642SMBAMS18P SMBAMS18RA SMBT18Ypage 647 page 647 page 673Q25page...

P. 4

BRACKETS CORDSETS RETROREFLECTORS MISCELLANEOUS Banner Bracket Selection Chart D12page 235aniM 1R QMRRRRFfM QMRRRRFRApage 628 page 672 page 672R55Fpage 240niM 1R QMRRRRFfM QMRRRRFRApage 628 page 672 page 672page 267OIVIDLA OIVIDLAr\page...

P. 5

Banner Bracket Selection Chart Accessories WORLD-BEAM" *QS18Upage 317 i^F*SMB18A SMB18FA.. SMB18FM SMB18Q SMB18SF SMB18UR SMB3018SCi-vy-irtyv co7 — *rt_ coo — *rt_ coo i-Yrtrtyv coo — *rt_ coo — *rt_ con i-Yrtrtyv conpage...

P. 1

Banner is the name to trust for all your lighting needs.A whole new way of looking at things.The first touch screen image sensor puts high-performanceinspection capabilities at your fingertips.• Hundreds of lighting solutions and accessories—the...

P. 2

Banner is the name to trust for all your lighting needs.A whole new way of looking at things.The first touch screen image sensor puts high-performanceinspection capabilities at your fingertips.• Hundreds of lighting solutions and accessories—the...

P. 3

Match to a reference to verify parts, labels and packagesregardless of orientation.Quickly verify that parts match a reference including regular and irregular shapes,part orientation, labels, alphanumeric characters, logos, codes, etching, inkjettingand...

P. 4

Match to a reference to verify parts, labels and packagesregardless of orientation.Quickly verify that parts match a reference including regular and irregular shapes,part orientation, labels, alphanumeric characters, logos, codes, etching, inkjettingand...

P. 5

Match to a reference to verify parts, labels and packagesregardless of orientation.Quickly verify that parts match a reference including regular and irregular shapes,part orientation, labels, alphanumeric characters, logos, codes, etching, inkjettingand...

P. 1

From simple to advanced,Banner solves more applications in your plant!Who else but Bannercould take the complexityout of safety control.Replace multiple safety moduleswith a single controller.SC22-3 Safety Controller and SC22-3E with Ethernetcommunications...

P. 2

From simple to advanced,Banner solves more applications in your plant!Who else but Bannercould take the complexityout of safety control.Replace multiple safety moduleswith a single controller.SC22-3 Safety Controller and SC22-3E with Ethernetcommunications...

P. 3

Experience theSC22-3/-3E.Set up multiple safety functions in minutes, not hours.Totally configurable. Remarkably easy.The versatile input circuit for bothsafety and non-safety devices.22 input terminals can monitor bothcontact-based and PNP solid-state...

P. 4

Experience theSC22-3/-3E.Set up multiple safety functions in minutes, not hours.Totally configurable. Remarkably easy.The versatile input circuit for bothsafety and non-safety devices.22 input terminals can monitor bothcontact-based and PNP solid-state...

P. 5

Experience theSC22-3/-3E.Set up multiple safety functions in minutes, not hours.Totally configurable. Remarkably easy.The versatile input circuit for bothsafety and non-safety devices.22 input terminals can monitor bothcontact-based and PNP solid-state...

P. 1

Plastic Fiber Optics• rovide an economical alternative to glass fiber optics for piping photoelectricPsensing light to and from confined areas with suitable environments• Ideal for detecting small objects• Withstand repeated flexing...

P. 2

FIBER SENSORS PLASTIC FIBERS GLASS FIBERSPlastic Fiber Optics SpecificationsOptical Fiber: acrylic (PMMA) monofilament, except as notedProtective Jacket: black polyethylene, except as notedThreaded End Tips and Hardware: nickel-plated...

P. 3

PhotoelectricsSensorsFiber OpticSensorsSpecial PurposeSensorsModelNumber2X ø 1.0stainlesssteelPBF16UpolyethylenePBF26UstainlesssteelpolyethylenePBF46UstainlesssteelpolyethylenePBF46UM3MJ1.3PBF66UPBFM16U25SafetyLight Screens30Fiber OpticSafety Systems2X...

P. 4

PLASTIC FIBERS ModelNumberM6 x 0.75nickel platedbrassPBT66UpolyethylenePBFMP16UMP.2 PBEFP26U200014.02X ø 1.0PBP16U300400500polyethylene12• mooth ferrule;Snon-bendable tip20406080100120140160ø 0.828• mooth ferrule;Snon-bendable...

P. 5

PhotoelectricsSensorsFiber OpticSensorsSpecial PurposeSensorsø 5.1stainlesssteelpolyethyleneø 7.95114.0 M4 X 0.7 stainless steel2 jam nuts and 1 ITLW included2X ø 2.2PolyethyleneTypical Range (mm)Vision1.57.038Lighting &Indicators•...

P. 1

FIBER OPTIC SENSORSD10D12PhotoelectricsSensorsFiber OpticSensorsSpecial PurposeSensorsR55FMeasurement &Inspection SensorsVisionWirelessLighting &IndicatorsSafetyLight ScreensSafetyLaser ScannersFiber OpticSafety SystemsSafety Controllers &ModulesSafety...

P. 2

FIBER SENSORS PLASTIC FIBERS GLASS FIBERSThe broadest selection of fiber sensors in the world.Fiber SystemsTwo-part fiber systems include the sensor and the separatelypurchased application-specific fiber.1. SensorsThe sensor contains all the electronics,...

P. 3

Choosing Plastic or GlassFiber ConstructionGlassPlastic fibers are for general purpose use. They tolerate severe flexing, can be cut tolength in the field and cost less than glass fibers. Glass fibers are the best choice forchallenging environments such...

P. 4

FIBER SENSORS PLASTIC FIBERS GLASS FIBERSD10 SeriesSENSORSRedefining High-PerformanceFiber Optic Sensing• Features advanced fiber optic amplifier for use with plastic fibers• Available in bipolar, discrete and analog/discrete output models•...

P. 5

PhotoelectricsSensorsFiber OpticSensorsSpecial PurposeSensorsonline10.0 mmAUTOCAD, STEP,IGES & PDF-LAYDE 0 msms40+Measurement &Inspection Sensors35.9 mmVision68.1 mmWireless10.0 mmLighting &IndicatorsD10—DiscreteModelsSafetyLight ScreensSafetyLaser...

P. 1

TL50 Tower LightMulti-Color General-Purpose or Audible IndicatorsFeatures• Rugged, cost-effective and easy-to-install multisegmentindicators• Illuminated segments provide easy-to-see operatorguidance and indication of equipment status•...

P. 2

Connection* LED Function** InputsColorCountModel4 Color: Blue, Green, Yellow, Red8-pin Euro integral QDconnectorTL50BGYRAQ 4* Integral QD models are listed.• For 150 mm PVC pigtail with QD, replace Q with QP in model number (example, TL50GYRQP).•...

P. 3

DimensionsM30x1(mounting nutincluded)Internal Threads1/2–14 NPSMMax Torque 2.25 Nm[20in–lbf]50.0 [1.97"]H19.0 [0.75"]8.3 [0.33"]Tower Height (H)Color Count Multi-Color General-Purpose Models Multi-Color Audible Models†1 61.2 mm (2.4")...

P. 4

Hookups – 5-Pin ModelsSourcing (PNP) Input Sinking (NPN) Input Wiring Key1 = BrownIndicatorColorC2C3C1C4/A3412518-30V dc21-27V acIndicatorColorC2C3C1C4/A3412518-30V dc21-27V ac2 = White3 = Blue4 = Black5 = GrayPin 5 could activate the corresponding...

P. 5

Style Model Length Dimensions Pinout1 = Brown38 mm max.(1.5")M12 x 1ø 15 mm(0.6")38 mm max.(1.5")2 m (6.5')5 m (15')9 m (30')MQDC-406RAMQDC-415RAMQDC-430RA4-pin Euro-styleRight-angle2 = White3 = Blue4 = BlackQuick-Disconnect (QD) CordsetsStyle Model...

P. 1

EZ-SCREEN®Safety Light SCREENs

P. 2

EZ-SCREEN®: Machine guarding just got easier. Much easier.Easy alignment and maintenance savesyou setup time and troubleshooting.Thanks to its excellent optical design and fi nely focused ±2.5° beam,EZ-SCREEN Systems are extremely easy...

P. 3

A versatile family of guarding solutions.Point of operation.Finger, hand or ankle detection at thepoint of operation of the machine using14 mm or 30 mm EZ-SCREEN.Area.Guard around a hazardous area bymounting horizontally without requiringsafety mats or...

P. 4

Choice of ranges and resolutions.You can choose the resolution andrange that fits your application,14 mm for finger, hand and ankleapplications or 30 mm for hand andankle detection.14 mmUp to 6 mRange30 mmUp to 18 mRangeEZ-SCREEN®: Exceptional diagnostics...

P. 5

Versatility to meet your control system requirements.Reduced resolution(multiple point fl oating blanking).Through simple DIP switch settings,the EZ-SCREEN can be set forreduced resolution, allowing anytwo consecutive beams to be blockedwithout causing...

P. 1

Printed in USA 01/04 P/N 111523 rev. BQC50 Series True Color SensorCompact, self-contained, three-output color-differentiating sensorFeatures• Two versions for application flexibility: QC50 models for most applications, andQCX50 models for more...

P. 2

QC50 Series True Color Sensor2 P/N 111523 rev. BBanner Engineering Corp. • Minneapolis, MN U.S.A.www.bannerengineering.com • Tel: 763.544.3164..........................................................................................................Figure...

P. 3

QC50 Series True Color SensorP/N 111523 rev. B 3Banner Engineering Corp. • Minneapolis, MN U.S.A.www.bannerengineering.com • Tel: 763.544.3164ProcedureLED DisplaySample ColorPosition new color to be sensedwithin scanning distance, typically...

P. 4

QC50 Series True Color Sensor4 P/N 111523 rev. BBanner Engineering Corp. • Minneapolis, MN U.S.A.www.bannerengineering.com • Tel: 763.544.3164................................................................................................................................................}............................................Figure...

P. 5

QC50 Series True Color SensorP/N 111523 rev. B 5Banner Engineering Corp. • Minneapolis, MN U.S.A.www.bannerengineering.com • Tel: 763.544.3164Sensor SetupOFF-Delay: Used only for applications that require an OFF-delay (see page 2). Choose...

P. 1

bannerengineering.comRange and application tolerantE Tolerates a +/-3 mm shift from the 10 mmfocal pointE Accommodates web flutter and similarvariations in the target’s locationwww.bannerengineering.com1.866.373.6767Two Sensors Detect all Registration...

P. 2

R58 Registration Mark SensorsBanner Engineering Corp. www.bannerengineering.com9714 Tenth Avenue North • Minneapolis, Minnesota 55441 • (763) 544-3164 • Fax: (763) 544-3213Toll-free 888-373-6767 • www.bannerengineering.com •...

P. 1

SLM Series Slot SensorsSelf-contained opposed-mode sensor pairPrinted in USA 03/09 P/N 122703 rev. CSee Safety Use Warning on Back PageFeatures• An easy-to-use, self-contained, opposed-mode sensor pair in a U-shaped housing• Rugged, sealed,...

P. 2

Banner Engineering Corp. • Minneapolis, MN U.S.A2 P/N 122703 rev. C www.bannerengineering.com • Tel: 763.544.3164SLM Series Slot SensorsFigure 1. SLM Series featuresOverviewThe SLM Series Slot Sensor (sometimes called a “fork sensor”)...

P. 3

P/N 122703 rev. C 3Banner Engineering Corp. • Minneapolis, MN U.S.Awww.bannerengineering.com • Tel: 763.544.3164SLM Series Slot SensorsSlot Opening 10, 20, 30, 50, 80, 120, 180, or 220 mm (depending on model); beam is 5 mm (0.2") from outer...

P. 4

Banner Engineering Corp. • Minneapolis, MN U.S.A4 P/N 122703 rev. C www.bannerengineering.com • Tel: 763.544.3164SLM Series Slot Sensors16.5[0.65"]SlotDepth34.9[1.37"]14.1[0.56"]5.0[0.20"]D8.0 [0.31"]1.0[0.04"]A2X 15.0[0.59"]B12.0[0.47"]3X...

P. 5

P/N 122703 rev. C 5Banner Engineering Corp. • Minneapolis, MN U.S.Awww.bannerengineering.com • Tel: 763.544.3164SLM Series Slot SensorsHookupsQuick-Disconnect (QD) CablesStyle Model Length Dimensions Pinout3-PinThreadedPico-Style,StraightPKG3M-2PKG3M-92...

P. 1

VersatileMeasurementTechnologybannerengineering.com1.888.373.6767Solves a Variety of Sizingand Process Applicationsð† Lumber trimming inspectionand length verificationð† Tire sorting by size anddetection of deformed tiresð†...

P. 2

Model Description LengthMAQDC-815Female Straight5 mMAQDC-830 9 mMAQDC-850 15 mMAQDC-815RAFemale Right-Angle5 mMAQDC-830RA 9 mMAQDC-850RA 15 mCommunication Cables — 5-pin Euro-Style QDModel Description LengthMQDMC-506Male Straight2 mMQDMC-515 5 mMQDMC-530...

P. 1

Printed in USA 05/09 P/N 146132 rev. BD10 Expert™– Small Object CounterAdvanced sensor for small object countingWARNING . . . Not To Be Used for Personnel ProtectionNever use these products as sensing devices for personnel protection. Doing...

P. 2

D10 Expert™ – Small Object Counter2 P/N 146132 rev. BBanner Engineering Corp. • Minneapolis, MN U.S.A.www.bannerengineering.com • Tel: 763.544.3164OverviewThe D10 Expert Small Object Counter sensor is a high-performance plastic...

P. 3

P/N 146132 rev. B 3D10 Expert™ – Small Object CounterBanner Engineering Corp. • Minneapolis, MN U.S.A.www.bannerengineering.com • Tel: 763.544.3164Health Mode AlarmThe Health Mode Alarm is a feature that can be used to determine...

P. 4

D10 Expert™ – Small Object Counter4 P/N 146132 rev. BBanner Engineering Corp. • Minneapolis, MN U.S.A.www.bannerengineering.com • Tel: 763.544.3164Programming OptionsLight/Dark OperateSelection Toggle to select the condition for...

P. 5

P/N 146132 rev. B 5D10 Expert™ – Small Object CounterBanner Engineering Corp. • Minneapolis, MN U.S.A.www.bannerengineering.com • Tel: 763.544.3164Sensor Setup• Configures sensor display and operating parameters. •...

P. 1

Printed in USA 02/09 P/N 108865 rev. DLX Series Part-Sensing Light ScreenFor Sensing Small or Flat Parts at High SpeedsWARNING . . . Not To Be Used for Personnel ProtectionNever use these products as sensing devices for personnel protection. Doing so...

P. 2

LX Series Part-Sensing Light Screens2 P/N 108865 rev. DBanner Engineering Corp. • Minneapolis, MN U.S.A.www.bannerengineering.com • Tel: 763.544.3164Theory of OperationThe LX Series light screen sensing system consists of two self-contained...

P. 3

P/N 108865 rev. D 3LX Series Part-Sensing Light ScreensBanner Engineering Corp. • Minneapolis, MN U.S.A.www.bannerengineering.com • Tel: 763.544.3164Supply Voltage and Power 10 to 30V dc (10% maximum ripple) at less than 1 watt each for emitter...

P. 4

Banner Engineering Corp., 9714 Tenth Ave. No., Minneapolis, MN USA 55441 • Phone: 763.544.3164 • www.bannerengineering.com • Email: sensors@bannerengineering.comLX Series Part-Sensing Light ScreensP/N 108865 rev. DWARRANTY: Banner Engineering...

P. 1

R55F Series Fiber-Optic Color Mark SensorsFor Plastic and Glass Fiber OpticsPrinted in USA 05/01 P/N 57945 rev. BR55F Series Sensor Features• Outstanding color contrast sensitivity; detects 16 levels of gray scale.• Depending on beam color,...

P. 2

R55F Series Fiber-Optic Color Mark Sensorspage 2Banner Engineering Corp. • Minneapolis, U.S.A.www.bannerengineering.com • Tel: 763.544.3164R55F Series Glass Fiber-Optic Sensor ModelsR55F Series Plastic Fiber-Optic Sensor Models* 9m (30') cables...

P. 3

R55F Series Fiber-Optic Color Mark Sensorspage 3Banner Engineering Corp. • Minneapolis, U.S.A.www.bannerengineering.com • Tel: 763.544.3164ABCFiberClipFigure 1. Installing fibers into the R55FSeries sensorPlastic fibersshown; procedureis identical...

P. 4

R55F Series Fiber-Optic Color Mark Sensorspage 4Banner Engineering Corp. • Minneapolis, U.S.A.www.bannerengineering.com • Tel: 763.544.3164Using the R55F Series SensorRUN ModeNormal operation of the R55F is called RUN mode. The LED indicators...

P. 5

Static Single-Point TEACH Procedure - Push ButtonStatic TEACH Procedure - Push ButtonR55F Series Fiber-Optic Color Mark Sensorspage 5Banner Engineering Corp. • Minneapolis, U.S.A.www.bannerengineering.com • Tel: 763.544.3164Push Button Resulting...

P. 1

Product Line CatalogD12 Series Fiber Optic SensorsApplications Accessories D12 AC-Coupled D12 High Power D12 Standard / High Speed D12 ExpertPrinted in USA P/N 36595G6A

P. 2

D12 Series Fiber Optic Sensors2 D12 Product Line CatalogApplications Accessories D12 AC-Coupled D12 High Power D12 Standard / High Speed D12 ExpertWARRANTY: Banner Engineering Corporation warrants its products to be free from defects for one year. BannerEngineering...

P. 3

D12 Product Line Catalog 3D12 Series Fiber Optic SensorsApplications Accessories D12 AC-Coupled D12 High Power D12 Standard / High Speed D12 ExpertApplications 23Accessories 22D12 Standard / High Speed Fiber Optic Sensors 10D12 High Power Fiber Optic...

P. 4

D12 Series Fiber Optic Sensors4 D12 Product Line CatalogApplications Accessories D12 AC-Coupled D12 High Power D12 Standard / High Speed D12 ExpertThe D12 FamilyHigh-Performance Fiber Optic SensorsAC-coupled D12 sensors are designed for applications in...

P. 5

D12 Product Line Catalog 5D12 Series Fiber Optic SensorsApplications Accessories D12 AC-Coupled D12 High Power D12 Standard / High Speed D12 ExpertThe Broadest LineBanner fiber optics allow you to "pipe"light into otherwise inaccessible andhostile enviornments....

P. 1

More information online at bannerengineering.com 29D10 SeriesHigh-Performance Fiber Optic Sensor

P. 2

More information online at bannerengineering.com• Features advanced fiber optic amplifier for use with plastic fibers• Available with visible red or green sensing beam• Delivers high-performance, low-contrast sensing with automaticTEACH...

P. 3

DURA-BEND™ for extremelytight radius bendsFluoropolymer encapsulatedfibersFocused beam fibersConvergent beam fibersLinear array fibersLiquid level detection fibersSteelSkin™ withstandsimpact, abrasion and flexingHigh temperature fibersPlastic...

P. 4

More information online at bannerengineering.comD10 Expert™ with Numeric Display: Redefining high-performance fiber optic sensingUltimate power and performance in low-contrast applicationsWith its advanced 16-bit microprocessor and 12-bit A/D resolution,...

P. 5

More information online at bannerengineering.comThree easy microprocessor-based programming optionsDynamic TEACH programs the sensor “on-the-fly.”Dynamic TEACH enables the D10 to sample the sensing events, “learn” a series ofconditions...

P. 1

204 More information online at bannerengineering.comFIBER SYSTEMSPLASTICFIBERSGLASS SENSORSFIBERSGlass Fiber Optics• Solve numerous challenging sensing applications in themost hostile environments, including temperatures up to480° C, corrosive...

P. 2

More information online at bannerengineering.com 205PLASTICFIBERSFIBER SYSTEMSSENSORS GLASSFIBERSGlass Fiber Optics SpecificationsConstruction Combination of optical glass fiber, stainless steel or PVC, brass, molded thermoplastics, and optical-gradeepoxy....

P. 3

206 More information online at bannerengineering.comFIBER SYSTEMSPLASTICFIBERSGLASS SENSORSFIBERSR55F SME312 D12E D12SETUPDOLOOFFDelaySwitch Point+DYNAMIC–STATICQS18Indicates lenses available for model. See page 207 for details.M600 M900 Available...

P. 4

More information online at bannerengineering.com 207PLASTICFIBERSFIBER SYSTEMSSENSORS GLASSFIBERSModel Number Drawing & Dimensions Core Dia.(mm)Min. BendRadius (mm) Features Typical Range (mm)DiffuseSide-viewBA1.53SMETA91425.4ø 5.3ø 5.1...

P. 5

208 More information online at bannerengineering.comFIBER SYSTEMSPLASTICFIBERSGLASS SENSORSFIBERSR55F SME312 D12E D12SETUPDOLOOFFDelaySwitch Point+DYNAMIC–STATICQS18ModelNumber Drawing & Dimensions Core Dia.(mm)Min. BendRadius (mm) Features...

P. 1

Superior ultrasonicsensors that withstandhostile environmentsSolves your toughestapplication challenges Liquid level monitoringin tanks Web loop control Slurry monitoring in vats Clear bottle detection Automotive glassdetection Repeatable detectionof...

P. 2

Models† Range andFrequency Cable* Output Response Time Data SheetT30UXDA 100 mm - 1 m224 kHz2 mDiscreteSelectableNPN or PNP,NO or NC45 msT30UXDB 200 mm - 2 m 138381174 kHz 92 msT30UXDC 300 mm - 3 m114 kHz 135 msT30UXUA 100 mm - 1 m224 kHz2 mAnalog...

P. 1

U-GAGE® ULTRASONICSensors

P. 2

2Banner U-GAGE® ® ultrasonic sensors solve difficult applications in your plant.Ultrasonic sensors that think as well asthey hear.Banner has reinvented ultrasonic sensing to beinfinitely more accurate, versatile and effective insolving some...

P. 3

3U-GAGE®®: The industry’s most advanced ultrasonic sensing features.Use an ultrasonic sensor whenyour application requires:• Precise user-defined sensing windows.• Reliable background suppression proximitysensing.• Positive...

P. 4

4Banner gives you the widest selection of ultrasonic models and features.)))))))))))))))))))))))))))))))))))))))))))))))))))))))))200 mm 8 mMIN MAX)))))))))))))))))))150 mm 1 mMIN MAX)))))))))))))))))))))))))))100 mm 1.4 mMIN MAX))))))))))))))))))))))))))))))))))))))300...

P. 5

510 to 30V dc10 to 30V dc12 to 24V15 to 24V dc12 to 24V dc15 to 24V dc12 to 24V dc15 to 24V dc12 to 30V dcYesYesYesYesYesYesYes1N/ANoYes3N/AYes1N/ANoNoYesYesYesYesYesNo110112701371089641107385920057438Short-Range:44177Long-Range:48454Short-Range:47818Long-Range:48456593215932340124Data...

P. 1

M12 Class 1 Laser EmitterIEC Class 1 Laser for use with Banner modulated receiversPrinted in USA 10/03 P/N 53808 rev. B• A low-power device emitting a visible red beam (650 nm wavelength).• Beam is bore-sighted to within 2 milliradians and...

P. 2

M12 Class 1 Laser Emitter2 P/N 53808 rev. BBanner Engineering Corp. • Minneapolis, U.S.A.Website: http://www.baneng.com • Tel: 763.544.3164M12 Class 1 Laser Emitter SpecificationsSupply Voltage and Current 10 to 30V dc (10% maximum ripple)...

P. 3

P/N 53808 rev. B 3M12 Class 1 Laser EmitterBanner Engineering Corp. • Minneapolis, U.S.A.Website: http://www.baneng.com • Tel: 763.544.3164M12 DimensionsExcess Gain57 mm(2.25")Green LEDIndicates power appliedYellow LEDIndicates laser enabledSee...

P. 4

M12 Class 1 Laser Emitter4 P/N 53808 rev. BBanner Engineering Corp. • Minneapolis, U.S.A.Website: http://www.baneng.com • Tel: 763.544.3164Mounting suggestions:• To take advantage of the bore-sight beam placement offered bythe M12 laser...

P. 5

P/N 53808 rev. B 5M12 Class 1 Laser EmitterBanner Engineering Corp. • Minneapolis, U.S.A.Website: http://www.baneng.com • Tel: 763.544.3164Conventional modulated infrared LED photoelectric emitters aredesigned with beam divergence angles of...

P. 1

Q60LAF Series Laser Adjustable-Field SensorsLong-Range Self-Contained Adjustable-Field Laser SensorsPrinted in USA 06/03 P/N 114348Features• Long-range adjustable-field background suppression sensor detects objects withina defined sensing field,...

P. 2

2 P/N 114348Q60LAF Series Laser Adjustable-Field SensorsBanner Engineering Corp. • Minneapolis MN, U.S.A.www.bannerengineering.com • Tel: 763.544.3164OverviewThe Q60LAF sensor is a full-featured adjustable-field sensor. These adjustablefieldsensors...

P. 3

P/N 114348 3Q60LAF Series Laser Adjustable-Field SensorsBanner Engineering Corp. • Minneapolis MN, U.S.A.www.bannerengineering.com • Tel: 763.544.3164Color SensitivityThe effects of object reflectivity on cutoff distance, though small, may...

P. 4

Q60LAF Series Laser Adjustable-Field Sensors4 P/N 114348Banner Engineering Corp. • Minneapolis MN, U.S.A.www.bannerengineering.com • Tel: 763.544.3164Setting the Cutoff DistanceThe cutoff distance for Q60LAF sensors may be adjusted between...

P. 5

P/N 114348 5CutoffDistanceReflectiveBackgroundSensingFieldER2R1ER2R1E = EmitterR1 = Near DetectorR2 = Far DetectorE = EmitterR1 = Near DetectorR2 = Far DetectorCutoffDistanceReflectiveBackgroundStrongDirectReflectionAway FromReceiverSensingFieldCore ofEmittedBeamCore...

P. 1

L-GAGE® LT3 Long-Range Retro Time-of-Flight Laser SensorSelf-contained Class 1 laser distance sensor, analog and discrete outputsPrinted in USA 02/05 P/N 68504 rev. CFeatures• Extremely long range: 50 m with included BRT-TVHG-8x10P high-grade...

P. 2

L-GAGE® LT3 Time-of-Flight Sensor – Retro, Analog/Discrete2 P/N 68504 rev. CBanner Engineering Corp. • Minneapolis, MN U.S.A.www.bannerengineering.com • Tel: 763.544.3164Theory of OperationA short electrical pulse drives a semiconductor...

P. 3

L-GAGE® LT3 Time-of-Flight Sensor – Retro, Analog/DiscreteP/N 68504 rev. C 3Banner Engineering Corp. • Minneapolis, MN U.S.A.www.bannerengineering.com • Tel: 763.544.3164Window LimitsWindow limits may be taught to the sensor in...

P. 4

L-GAGE® LT3 Time-of-Flight Sensor – Retro, Analog/Discrete4 P/N 68504 rev. CBanner Engineering Corp. • Minneapolis, MN U.S.A.www.bannerengineering.com • Tel: 763.544.3164Teaching Limits for Either Analog or Discrete OutputEither...

P. 5

L-GAGE® LT3 Time-of-Flight Sensor – Retro, Analog/DiscreteP/N 68504 rev. C 5Banner Engineering Corp. • Minneapolis, MN U.S.A.www.bannerengineering.com • Tel: 763.544.3164Push Button0.04 “click” 0.8 sec.Remote Wire0.04...

P. 1

ProductLineSpecificationsQ85 Series SensorsSelf-contained ac/dc and dc-only sensors with e/m relay or solid-state outputand optional timing logic•••••••SMB85Bbracket andhardwareincludedT9 (logic)model shownwith...

P. 2

Q85 Series Sensors2Q85s are compact, economical, photoelectric sensors in ruggedNEMA-6P rated ABS housings. They are ideally suitedfor conveyor control and similar applications. The timinglogic functions offered in the "T9" models provide additionalcontrol...

P. 3

Sensing range: 10 inches (250 millimeters)referenced to a 90% reflectance white test cardSensing beam: 880 nanometers, infraredModels for 24-240V ac/12-240V dc, SPDT electromechanical relay:Q85VR3D 31655; SPDT e/m relay, on/off outputQ85VR3D-T9 31654;...

P. 4

Q85 Series SensorsSpecifications, Q85VR3x Models(24-240V ac or 12 to 240V dc, electromechanical output)Sensing range: See sensor descriptions by mode (page 3).Sensing beam: See sensor descriptions by mode (page 3).Supply voltage: 24 to 240V ac, 50/60...

P. 5

Q85 Series SensorsShown with SMB85R mounting bracket(p/n 32798, order separately)Shown with SMB85Bmounting bracket(included)Bottom viewTop viewSpecifications, Q85BB62x Models(10 to 48V dc, solid-state output)Sensing range: See sensor descriptions by mode...

P. 1

MAXI-BEAM® SensorsHighly versatile modularized photoelectric sensing controls••••••Highly versatile, self-contained, modularized photoelectricsensors; especially suited to industrial environmentsWide selection...

P. 2

RWB42Banner MAXI-BEAM sensors are highly versatile, self-contained,modularized photoelectric sensing controls that are ideally suited toindustrial environments. The basic MAXI-BEAM is an ON/OFFswitch consisting of three modules: a sensor head, a power...

P. 3

Functional Schematic, MAXI-BEAM Sensor HeadExploded view, MAXI-BEAM SensorSensitivityControlLED/AID™IndicatorRotatableSensor HeadProgrammingRingOptionalLogic ModuleProgrammingRing for LogicPower BlockOutput OFFLEDOutput ONLEDQuick Disconnect (optional)ConduitEntranceRWB4WiringBase3Selection...

P. 4

Sensing Mode Models Excess Gain Beam PatternThis sensor pair is designed for opposed mode operation using Banner glass fiberoptics. Maximum range (HP mode) using L9 lenses is 12 feet. Maximum rangeusing L16F lenses is 50 feet.OPPOSED ModeMAXI-BEAM emitters...

P. 5

5MAXI-BEAM Sensor HeadsSensing Mode ModelsRange: 5 feet (1,5 m) inHP and 2W modesBeam: infrared, 880nmResponse:HP, 2W modes: 10msHS mode: 1msSP mode: 0.3msRepeatability: HP, 2W=3.3ms; HS = 0.3ms;SP = 0.1msRSBDDIFFUSE Mode(short range)Range: 30 inches...

P. 1

MULTI-BEAM 2-wire ac Scanner Blocks for MULTI-BEAM' 2-wire modular photoelectric sensois thephotoelectricspecialist A Banner 2-wire ac MULTI-BEAM Sensor is a compact modular self-contained photoelectric switch consisting of threc components: a scanner...

P. 2

r MULTI-BE AM 2-wire Scanner Blocks Sensing Mode Models Excess Gain Beam Pattern OPPOSED Mode OBJECT SBE & 2SBR1 Range: 150 feet (45m) Response: 10ms on/off Repeatability: 0.03ms Beam: inf'rared, 940nm Effective beam: 1" dia. opposed distance--feet...

P. 3

MULTI-BEAM 2-wire Scanner Blocks- Sensing Mode Models Excess Gain Beam Pattern DIFFUSE Mode 1000 2SBD1 e x c 100 s Range: 12 inches (30cm) s Response: lOmson/off g * 10 Repeatability: 2.5ms n Beam: infrared, 880nm OBJECT Models 2SBD1 and...

P. 4

Troubleshooting Table Symptom Probable Cause Correction Sensilivily is too low Tum SENSITIVITY control clockwise to increase gain Lse connection Check wiring and connections lo load Alignaient indicator never cornes "on", and output never switches the...

P. 1

Q60AF SensorsLong-Range Self-Contained Adjustable-Field SensorsPrinted in USA 06/02 P/N 67003 rev. BQ60AF Adjustable-Field Features• Long-range adjustable-field background suppression sensor detects objects within a definedsensing field, while ignoring...

P. 2

Q60 Series Adjustable-Field Sensorspage 2Banner Engineering Corp. • Minneapolis MN, U.S.A.www.bannerengineering.com • Tel: 763.544.3164Q60AF OverviewThe Q60AF sensor is a full-featured adjustable-field sensor.These adjustable-field sensors...

P. 3

page 3Q60 Series Adjustable-Field SensorsBanner Engineering Corp. • Minneapolis MN, U.S.A.www.bannerengineering.com • Tel: 763.544.3164Sensor SetupSetting the Cutoff DistanceThe cutoff distance for Q60AF sensors may be adjusted between 200...

P. 4

Q60 Series Adjustable-Field Sensorspage 4Banner Engineering Corp. • Minneapolis MN, U.S.A.www.bannerengineering.com • Tel: 763.544.3164Color SensitivityThe effects of object reflectivity on cutoff distance, thoughsmall, may be important for...

P. 5

page 5Q60 Series Adjustable-Field SensorsBanner Engineering Corp. • Minneapolis MN, U.S.A.www.bannerengineering.com • Tel: 763.544.3164To set a delay, single-click the appropriate button or pulse the remote wire as shown in Figure 14to enable...

P. 1

Printed in USA 05/07 P/N 38244 rev. BQ45BB6LL Series – Laser Diode Retroreflective Sensors†Very-Long-Range Retroreflective Sensors for 10 to 30V dcWARNING . . . Not To Be Used for Personnel ProtectionNever use these products as sensing devices...

P. 2

Q45BB6LL Series – Laser Retroreflective SensorsP/N 38244 rev. BBanner Engineering Corp. • Minneapolis, MN U.S.A.www.bannerengineering.com • Tel: 763.544.3164Sensing Distance = XØ = Misalignment AngleY = X(tan Ø)YCLOverviewStatus...

P. 3

Q45BB6LL Series – Laser Retroreflective SensorsP/N 38244 rev. BBanner Engineering Corp. • Minneapolis, MN U.S.A.www.bannerengineering.com • Tel: 763.544.3164Alignment TipWhen using a small retroreflective target at medium or long range,...

P. 4

Q45BB6LL Series – Laser Retroreflective SensorsP/N 38244 rev. BBanner Engineering Corp. • Minneapolis, MN U.S.A.www.bannerengineering.com • Tel: 763.544.3164SpecificationsSupply Voltage and Current 10 to 30V dc (10% maximum ripple),...

P. 5

Q45BB6LL Series – Laser Retroreflective SensorsP/N 38244 rev. BBanner Engineering Corp. • Minneapolis, MN U.S.A.www.bannerengineering.com • Tel: 763.544.3164DimensionsHookupsCabled Models 5-Pin Mini-StyleQuick-Disconnect Models5-Pin...

P. 1

PD45 Series PicoDot®Printed in USA 10/03 P/N 115700Polarized Retroreflective and Convergent Laser SensorsFeatures• Compact and lightweight; ideal for use on robotic end effectors• Class 2 laser diode light source.• Convergent beam...

P. 2

PD45 Series PicoDot® Sensors2 P/N 115700Banner Engineering Corp. • Minneapolis, MN U.S.A.www.bannerengineering.com • Tel: 763.544.3164Convergent-Mode ModelsExcels at sensing small parts and profiles and uses fixed-field technology toignore...

P. 3

PD45 Series PicoDot® SensorsP/N 115700 3Banner Engineering Corp. • Minneapolis, MN U.S.A.www.bannerengineering.com • Tel: 763.544.3164Retroreflective Sensor AlignmentBecause the PicoDot laser sensor has such a long sensing range, and...

P. 4

PD45 Series PicoDot® Sensors4 P/N 115700Banner Engineering Corp. • Minneapolis, MN U.S.A.www.bannerengineering.com • Tel: 763.544.3164LASER LIGHTDO NOT STARE INTO BEAM..CLASS 2 LASER PRODUCTAvoid exposure - laser light..emitted from this...

P. 5

PD45 Series PicoDot® SensorsP/N 115700 5Banner Engineering Corp. • Minneapolis, MN U.S.A.www.bannerengineering.com • Tel: 763.544.3164SpecificationsSensing Beam Visible red Class 2 laser, 650 nmSupply Voltage 10 to 30V dc (10% max ripple)...

P. 1

QMT42 Series Long-Range Diffuse SensorsAdjustable Sensing Distance of up to 6 m (20')Printed in USA P/N 57890Features• Powerful, collimated infrared light source and special lensing allows reliablelong-range detection of even the darkest objects•...

P. 2

QMT42 Series Long-Range Diffuse Sensorspage 218.0 mm(0.71")ø 3.2 mm(0.125")(4 Holes)58.0 mm(2.28")Green LED Power/Overload IndicatorYellow LEDOutput/Marginal Indicator10.0 mm(0.39")12.3 mm(0.48")Threaded M4 x 0.7Mounting Holes23.9 mm (2)(0.94")2...

P. 3

page 3QMT42 Series Long-Range Diffuse SensorsSensors with NPN (Sinking) Outputs Sensors with PNP (Sourcing) OutputsCabled Models Cabled ModelsQuick Disconnect Models Quick Disconnect Modelsbubn-+bkwh LoadLoad10-30V dcbnbu -+bkwhLoadLoad10-30V dcbubn-+bkwh...

P. 4

Banner Engineering Corp., 9714 Tenth Ave. No., Minneapolis, MN 55441 • Phone: 612.544.3164 • Fax: 612.544.3573 • E-mail: sensors@baneng.comQMT42 Series Long-Range Diffuse SensorsSMB42L SMB42U2.3 mm(0.09")12.7 mm(0.50")23.3 mm(0.92")6.4...

P. 1

Printed in USA 11/06 P/N 35331 rev. B•••••••SMI30 Series Intrinsically Safe SensorsRugged, NEMA 6P-plus sensors in 30 mm threaded PBT barrel housingsBanner SMI30 Series intrinsically safe barrel sensors are extremely...

P. 2

SMI30 Series Intrinsically Safe Sensors2SMI30 Series receivers have a red LED alignment indicator that lightswhenever the receiver "sees" its modulated light source. Emitters havea red LED to indicate "power on". All LED indicators are mountedinternally...

P. 3

HAZARDOUS AREABARRIERS NOT REQUIRED FOR DIV. 230 VDC MAX. (Reference NOTE #5 for FM & CSA)3-WIRE HOOKUPLOADIN OUTIN OUTGEARTH GROUND(less than 1 ohm)BLUEBROWNBLACKINPUT15 MA.MAX.BUSBAR+-OPERATINGVOLTAGE:18-30 VDC25 MA. DCBOTTOM VIEW (colors shown...

P. 4

CI3RC2 Current Amplifier ModuleHookup to Banner MAXI-AMP CI3RC2Current Amplifier Module(see the data sheet packed with the CI3RC2 for more information)MAXI-AMP™ CI3RC2 ModuleBanner MAXI-AMP module model CI3RC2 (part number 36606)is a self-contained...

P. 5

SMI30 Series Intrinsically Safe Sensors5These new water-tight aperturesfor SM30 Series sensorsmay be used to size andshape the effective beam orto limit excess gain for avoiding"burn-through" effects.Apertures are sold as a kit,which includes a thread-onstainless...

P. 1

Printed in USA 01/05 P/N 121520S30 Sensors – dc-Voltage SeriesSelf-contained dc-operated sensors* Standard 2 m (6.5') cable models are listed.• For 9 m (30') cable: add suffix “W/30” (e.g., S306E W/30).• For 4-pin Euro-style...

P. 2

S30 Sensors – dc-Voltage SeriesP/N 121520Banner Engineering Corp. • Minneapolis, MN U.S.A.www.bannerengineering.com • Tel: 763.544.3164Fixed-Field Mode OverviewS30 Series self-contained fixed-field sensors are small, powerful, infrared...

P. 3

P/N 121520S30 Sensors – dc-Voltage SeriesBanner Engineering Corp. • Minneapolis, MN U.S.A.www.bannerengineering.com • Tel: 763.544.3164Color SensitivityThe effects of object reflectivity on cutoff distance, though small, may be important...

P. 4

S30 Sensors – dc-Voltage SeriesP/N 121520Banner Engineering Corp. • Minneapolis, MN U.S.A.www.bannerengineering.com • Tel: 763.544.3164Supply Voltage andCurrent10 to 30V dc (10% max. ripple); supply current (exclusive of load current):Emitters:...

P. 5

P/N 121520S30 Sensors – dc-Voltage SeriesBanner Engineering Corp. • Minneapolis, MN U.S.A.www.bannerengineering.com • Tel: 763.544.3164Excess GainPerformance based on use of a 90% reflectance white test card.†Fixed-Field –...

P. 1

Printed in USA 01/05 P/N 121519S30 Sensors – ac-Voltage SeriesSelf-contained ac-operated sensors* Standard 2 m (6.5') cable models are listed.• 9 m (30') cable: add suffix “W/30” (e.g., S303E W/30).• 4-pin Micro-style QD...

P. 2

S30 Sensors – ac-Voltage SeriesP/N 121519Banner Engineering Corp. • Minneapolis, MN U.S.A.www.bannerengineering.com • Tel: 763.544.3164Fixed-Field Mode OverviewS30 Series self-contained fixed-field sensors are small, powerful, infrared...

P. 3

P/N 121519S30 Sensors – ac-Voltage SeriesBanner Engineering Corp. • Minneapolis, MN U.S.A.www.bannerengineering.com • Tel: 763.544.3164Color SensitivityThe effects of object reflectivity on cutoff distance, though small, may be important...

P. 4

S30 Sensors – ac-Voltage SeriesP/N 121519Banner Engineering Corp. • Minneapolis, MN U.S.A.www.bannerengineering.com • Tel: 763.544.3164Supply Voltage andCurrent20 to 250V ac (50/60 Hz)Average current: 20 mAPeak current: 200 mA @ 20V...

P. 5

P/N 121519S30 Sensors – ac-Voltage SeriesBanner Engineering Corp. • Minneapolis, MN U.S.A.www.bannerengineering.com • Tel: 763.544.3164Excess GainPerformance based on use of a 90% reflectance white test card.†Fixed-Field –...

P. 1

EZ-BEAM® M18 Series SensorsStainless Steel 18 mm Barrel-style DC Photoelectric SensorsPrinted in USA P/N 49201E9BM18 Series Opposed-Mode Emitter (E) and Receiver (R)20 m(66')2 m (6.5')4-Pin Euro-style QD10-30V dc—1101001 m3.3 ft10 m33 ft100...

P. 2

EZ-BEAM M18 Series Sensorspage 2Banner Engineering Corp. • Minneapolis, U.S.A.Website: http://www.baneng.com • Tel: 888.373.6767M18SP6LPM18SP6LPQ2 m (6.5')4-Pin Euro-style QDModels Range CableSupplyVoltageOutputType Excess Gain Beam PatternM18SN6LPM18SN6LPQ2...

P. 3

EZ-BEAM M18 Series Sensorspage 3Banner Engineering Corp. • Minneapolis, U.S.A.Website: http://www.baneng.com • Tel: 888.373.6767M18 Series Fixed-Field ModeM18SP6FF100M18SP6FF100Q2 m (6.5')4-Pin Euro-style QDModelsCutoffPoint CableSupplyVoltageOutputTypeExcess...

P. 4

EZ-BEAM M18 Series Fixed-Field Sensor Setup TipsEZ-BEAM M18 Series Sensorspage 4Banner Engineering Corp. • Minneapolis, U.S.A.Website: http://www.baneng.com • Tel: 888.373.6767GeneralFor highest sensitivity, the sensor-to-object distanceshould...

P. 5

EZ-BEAM M18 Series SpecificationsEZ-BEAM M18 Series Sensorspage 5Banner Engineering Corp. • Minneapolis, U.S.A.Website: http://www.baneng.com • Tel: 888.373.6767Supply Voltage and CurrentOpposed Mode Emitters:Opposed Mode Receivers:Polarized...

P. 1

Printed in USA 10/07 P/N 35749 rev. DS186ELD(Q) Laser Diode EmitterClass 1 Laser for Use With Banner Modulated Photoelectric ReceiversWARNING . . . Not To Be Used for Personnel ProtectionNever use these products as sensing devices for personnel protection....

P. 2

S186ELD Laser Diode EmitterP/N 35749 rev. DBanner Engineering Corp. • Minneapolis, MN U.S.A.www.bannerengineering.com • Tel: 763.544.3164AlignmentConventional modulated infrared LED photoelectric emitters are designed with beamdivergence angles...

P. 3

S186ELD Laser Diode EmitterP/N 35749 rev. DBanner Engineering Corp. • Minneapolis, MN U.S.A.www.bannerengineering.com • Tel: 763.544.3164Supply Voltage and Current 10 to 30V dc (10% maximum ripple) at less than 35 mASupply Protection Circuitry...

P. 4

Banner Engineering Corp., 9714 Tenth Ave. No., Minneapolis, MN USA 55441 • Phone: 763.544.3164 • www.bannerengineering.com • Email: sensors@bannerengineering.comS186ELD Laser Diode EmitterP/N 35749 rev. DWARRANTY: Banner Engineering...

P. 1

tFACTORY AUTOMATION PROCESS AUTOMATION WATER TREATMENT TRAFFIC AGRICULTUREDX70Point to Point DX80Point to MultipointDX85Extension I/OFlexpowerBattery DX99 ATEXIntrinsically SafeMultiple NodesGateway PRODATARADIOSerialCommunicationRobust IP67Bidirectional...

P. 2

tDX80Star TopologyDX85Extension I/ODX70Point to PointDX80 2,4 GHz Gateways with Modbus RTU (RS485) Communication & NodesGateway Model Antenna Type Discrete I/O Analogue I/O Node ModelIN (PNP) OUT (PNP) IN OUT TypeDX80G2M6W8P4 Internal 8 4 / / / DX80N2X6W8P4DX80G2M6S8P4...

P. 1

www.bannerengineering.com1.888.373.6767AssemblyAutomotiveMaterialHandlingPackagingRoboticsEZ-LIGHT™ Solutionsfor Connectivity

P. 2

More information online at bannerengineering.comBanner lights the way for leaner manufacturing.At the heart of continuous improvement: Banner innovationEnabling and optimizing manufacturing solutions for a broad cross-section of industries worldwide remainsthe...

P. 3

Other ColorsAvailableMore information online at bannerengineering.com Indicators provide three colors from two outputs forsimple and economical visual indication of process status.Models LED Function* Inputs**T30GRY6PQPMA 3-Color Logic:Green (Pin 4)Red...

P. 4

• 30 mm mount• PolycarbonateCL50• 50 mm dome/30 mm mount• Thermoplastic polyesterK50L• 50 mm dome/flat mount• Thermoplastic polyesterK50FLmm mountpolyester• 50 mm dome/flat or DIN-mount• Thermoplastic polyesterK80LModels...

P. 5

SA-M30E12ThermoplasticAcetal adapterand cover(used with K50L)SA-E12M30ThermoplasticAcetal mountingbaseSOP-E12-150A(150 mm)SOP-E12-300A(300 mm)SOP-E12-900A(900 mm)aluminum pipeSOP-E12-150SS(150 mm)SOP-E12-300SS(300 mm)SOP-E12-900SS(900 mm)stainless steel...

P. 1

ECONO-BEAM® Diffuse-Mode Sensorsfor 120V ac operationPrinted in USA P/N 37429A0AECONO-BEAM® Diffuse-Mode Features• Small, low-cost, self-contained sensors engineered to provide reliable sensing,primarily in straight-forward OEM applications•...

P. 2

ECONO-BEAM® – Diffuse AC SensorsBanner Engineering Corp., 9714 Tenth Ave. No., Minneapolis, MN 55441 • Phone: 888.373.6767 • http://www.baneng.com • Email: sensors@baneng.comWARRANTY: Banner Engineering Corp. warrants its...

P. 1

Banner Engineering EuropePark Lane, Culliganlaan 2F1831 Diegem – Belgium+32 2 456 07 80www.bannereurope.comDUO-TOUCHTwo-Hand-ControlPrevent repetitivestress injuries• Dependable switching with nophysical pressure required• Eliminate...

P. 2

BANNER ENGINEERING EUROPEWWW.BANNEREUROPE.COMSENSORS VISION WIRELESS I/O INDICATORS SAFETYEN-A008 - 09/2009DUO-TOUCH Two-Hand-ControlUnique patented photoelectric design,with redundant emitter and receiverErgonomic and rugged housing:- IP66- Immune to...

P. 1

© 2009 Banner Engineering Corp., Minneapolis, MN USAIndustrial WirelessI/O Network

P. 2

2DX70 Point-to-Point Wireless I/O Pairs ................... page 3DX80 Wireless I/O NetworkDX80 Data Radios ........................................................................ page 4DX85 Modbus RTU Remote I/O.......................................................

P. 3

More information online at bannerengineering.comPoint-to-Point Wireless I/O PairsDX70 Gateways and Nodes are an economical industrial wireless I/O solution. Each device provides direct I/O linking and plug-n-playinstallation. Banner’s unique radio...

P. 4

4DX80 EtherNet/IPand Modbus TCPGatewaysModel Frequency I/O Data SheetDX80P9T6S 900 MHz The GatewayPro features Modbus/TCP andEtherNet/IP communication protocols. Thisdevice has no inputs or outputs.131933DX80P2T6S 2.4 GHzDX83 No RadioThe Ethernet Bridge...

P. 5

More information online at bannerengineering.comDX80 Modbus RTU Gateways• Gateways are the master of Banner’s SureCross Wireless Network• Modbus 485 communication capability is integrated into every Gateway• Gateway models are...

P. 1

tULTRASONICSENSORSS18UM25UT18UQT50UQS18UT30UXIP 69K CERTIFIED IP 69K CERTIFIEDIP69K CERTIFIED IP69K CERTIFIEDIP67 CERTIFIED IP67 CERTIFIEDIP 69K CERTIFIED IP 69K CERTIFIEDIP69K CERTIFIED IP69K CERTIFIEDwww.bannereurope.comWave GuideIP67IP69KEcolab ApprovalTEACH...

P. 2

tIP67IP67IP68IP67IP67IP69KIP67300 mm 3 m200 mm200 mm100 mm2 m8 m.............1 m300 or 600 mm50 mm 500 mm5 ms4-20mA4-20mA4-20mARELAY0-10Vdc0-10Vdc0-10Vdc15 msvS18UQS18UT30UXM25UT18UNPNNPNNPNNPNNPN2X NPNPNPPNPPNPPNPPNP2X PNP30 mm 300 mmSMBQS18RA SMB18A...

P. 1

COLOR Full-function vision sensor with a compact camera and separate controller Օ Removable terminal block Metal IP68-rated camera and integrated light for inspections in dirty or washdown conditionsՕ Complete set of inspection tools available...

P. 2

Accessories Vision functions Optics Monitors & Housings Lighting • Graphically develop your application on a single reference image • Common user interface for all devices A big selection of standard...

P. 1

P4 BCR Barcode Reader >?Compact self-contained Barcode Reader Ζ no external controller necessary?Reads linear (1D) and DataMatrix (2D) barcode types?Two housing styles and multiple mounting brackets for easy installation?Convenient, 12-pin connector...

P. 2

Supported Barcode Types: 1D Codes: UPC-A, EAN13, Codabar, Code 39, Code 128, interleaved 2 of 5 2D Codes: DataMatrix (ECC200) Bi-colour status indicators: • Trigger • Power supply • Pass/Fail indication ...

P. 1

EZ-SCREEN® SAFETY SYSTEMS TYPE 4 POINT & * GRID • Single beam system • 2-beam system: beam spacing 500 mm 76

P. 2

EZ-SCREEN TYPE 2 TYPE 4 - POINT & GRID TYPE 4 - 14 & 30 mm EZ-SCREEN TYPE 2 - 30 mm Resolution - 0,2 m to 15 m Range EZ-SCREEN TYPE 4 - 14 mm Resolution - 0,1 m to 6 m Range EZ-SCREEN TYPE 4 - Point Systems, 24 ms Response...

P. 1

"PICK-TO-LIGHT" .LIGHT SOLUTIONS Opposed mode light screen Range 2 m Picking lights on both emitter & receiver Four available heights (100, 225, 300 and 375 mm) Low profile housing style Pigtail or cabled versions t ...

P. 2

K50 f EZ-LIGHT Pick-to-Light Sensors: PVA Opposed Mode Light Screens - Emitter & Receiver Pairs ^ Example Model (Kit) Array Length Beams Connection Output P/N PVA100P6 100 mm 5 2 m unterminated cable...

P. 1

Q12 QS30 [■«11 LllBHfJ II 360° visible status LEDs • 360° visibility • M30 nose or side mount • with or without potentiometer adjustment • cable or integral...

P. 2

10 VDC to 30 VDC, 2 m cable or 4-pin QD M12, PNP or NPN, LO and DO 10 VDC to 30 VDC, 2 m cable or 4-pin pigtail QD M8, bipolar PNP and NPN, LO or DO 10 VDC to 30 VDC, 2 m cable or 5-pin QD M12, bipolar PNP and NPN, LO and DO Sensing...

P. 1

EZ-ARRAY Measuring Light Screen ٕ Two-piece design with integrated electronics eliminates the need for a controller Resolution of 5 mm and 2,5 mm for edge guiding, allowing high precision detectionՕ Sensing distance ranges from 400 mm up to...

P. 2

Objective: Measure height, length and width of boxes for storage and collect profile information for shipping. Objective: Determine tyre size on a conveyor. Description: The outer and inner diameter of each tyre is determined. The controller...

P. 1

ACCESSORIES Accessories Cables & Wiring Products.......... page 174 • Choice of cable styles and lengths for each sensor or module makes installation easier. • PICO-GUARD plastic optical fibers are available in...

P. 2

ACCESSORIES Cables & Wiring Products 4-Pin Euro-Style Cables Cable: PVC jacket, polyurethane connector body, chrome-plated brass coupling nut Conductors: 20 or 22 AWG high-flex stranded, gold-plated contacts Temperature: -40°...

P. 3

ACCESSORIES Cables & Wiring Products Cable: PVC jacket, polyurethane connector body, chrome-plated brass coupling nut Conductors: 22 or 20 AWG high-flex stranded, gold-plated contacts Temperature: -40° to +90° C ting:...

P. 4

ACCESSORIES Cables & Wiring Products in Euro-Style Cables - Double Ended Cable: PVC jacket, polyurethane connector body, chrome-plated brass coupling nut Conductors: 22 AWG high-flex stranded, gold-plated contacts Temperature: -40°...

P. 5

ACCESSORIES Cables & Wiring Products 8-Pin Euro-Style Cables - Double Ended Cable: PVC jacket, polyurethane connector body, chrome-plated brass coupling nut Conductors: 22 AWG high-flex stranded, gold-plated contacts Temperature:...

P. 1

EMERGENCY STOP DEVICES Emergency Stop Devices E-Stop Buttons . . . . . . . . . . . . . . . . . . page 164 Mechanical palm buttons push to stop and twist to release.Օ Modular design makes assembly and installation easy. Kits simplify selection...

P. 2

EMERGENCY STOP DEVICES E-Stop Buttons E-Stop Button Emergency Stop Push Buttons Mechanical palm buttons push to stop and twist to release.Օ Modular design makes assembly and installation easy. Kits simplify selection and ordering.Օ...

P. 3

EMERGENCY STOP DEVICES E-Stop Buttons > E-Stop Push-Button Components DownloadPDF ModelsDescriptionProductDataSheet 8-LP2T-B6644* 22.5 mm plastic button (mounting adapter included) 8-LM2T-B6644* 22.5 mm metal button (mounting adapter sold separately)...

P. 4

EMERGENCY STOP DEVICES E-Stop Buttons > E-Stop Push-Button Kits (contd) ModelsE-Stop ButtonContacts EnclosureLegend SSA-EBP-02L > 2 NC SSA-EBP-11L Plastic > 1 NC & 1 NO NoYes SSA-EBP-12L > 2 NC & 1 NO SSA-EBM-02E > 2 NC...

P. 5

EMERGENCY STOP DEVICES E-Stop Buttons E-Stop Push-Button Specifications Mechanical Life 300,000 operations Operating Force 0.8 kg Mounting AdapterPlastic button: The adapter is fixed to the mounting surface by means of incorporated screws (T >max...

P. 1

SAFETY INTERLOCK SWITCHES Safety Interlock Switches PICO-GUARD . . . . . . . . . . . . . . . . . page 137 ٕ Compact, non-contact fiber optic safety switches Straight, right-angle, dual-lens, extreme-duty and heavy-duty modelsՕ Low-cost...

P. 2

SAFETY INTERLOCK SWITCHES Selection Chart Catalog Package Housing Actuator Solenoid Type Model Page Type Style Material Contacts Contacts SFI-S1../R1.. SFI-D1../A1.. Plastic > SFI-M12.. Page 137Fiber Optic2-PiecePlastic Metal ٗ >PICO-GUARD...

P. 3

SAFETY INTERLOCK SWITCHES SAFETY INTERLOCK SWITCHES PICO-GUARD Safety Switches PICO-GUARD ٙ Fiber OpticInterlock Switches Interlock switches interface with PICO-GUARD fiberoptic controllers.Օ Compact, non-contact and easy to install,...

P. 4

SAFETY INTERLOCK SWITCHES PICO-GUARD Safety Switches PICO-GUARD ٙ > Fiber Optic Interlock Switches Six housing styles Easy-to-install housings DetailedDimensions Quick-release connectors or integral fibers, depending on model A...

P. 5

SAFETY INTERLOCK SWITCHES PICO-GUARD >Safety Switches > PICO-GUARD ٙ Fiber Optic Interlock Switches DownloadPDF ModelsHousing MaterialOrientation/TypeFiberLength*Separation andMax. Switching DistanceDataSheet SFI-S1R BulkorPrecut...

P. 1

SAFETY MODULES Safety Modules PICO-GUARD . . . . . . . . . . . . . . . . . . . page 108 ٕ Monitors multiple safety points. Replaces mechanical safety interlock switches.Օ Eliminates electrical wiring to switchpoints. Installs easily....

P. 2

SAFETY MODULES Selection Chart Catalog Safety Page Category Supply Voltage Functional Stop Category Input Device Type Model Optical & Mechanical & Solid State SFCDT-4A1 Page 108 4 0...

P. 3

SAFETY MODULES Selection Chart > Safety Output Aux. Output Response HousingInputs Outputs Rating Outputs Time Delay Width 4 Optical Channels&2 NC USSI > 2 PNPOSSD 13 ms 0.5 amps3 Solid-State >(Aux., Fault, Weak) (optical channels) (Aux.,...

P. 4

SAFETY MODULES PICO-GUARD >Controllers > PICO-GUARD ٙ > Fiber Optic Controllers Flexible and easy to install, the controller is a low-cost alternative to cumbersome and costly methodsrequired for machine safeguarding. Օ Each...

P. 5

SAFETY MODULES PICO-GUARD' Controllers PICO-GUARD™ Controller Bi-color LED indicators for easy status monitoring Four optical channels Removeable terminal blocks Quick-disconnect fiber optic interface Three options for fiber...

P. 1

TWO-HAND CONTROL MODULES Two-Hand Control Modules TWO-HAND CONTROL MODULES DUO-TOUCH >SG Two-Hand Control Modules . . page 87 Ε Monitors STB buttons or other actuators. Delivers highest level of safety for two-hand controls.Օ Offers...

P. 2

TWO-HAND CONTROL MODULES Selection Chart > Catalog Supply Safety Output Auxiliary Housing Type Model Page Type Voltage Inputs Outputs Rating Outputs Width AT-FM-10K Page 87IIIC24V ac/dc2 STB* > 2 NO 6 amps22.5 mm >TWO-HAND CONTROL MODULES AT-GM-13A...

P. 3

TWO-HAND CONTROL MODULES DUO-TOUCH SG Modules DUO-TOUCH ή SG Two-hand ControlModules, STB Compatible Modules work with Banner STB self-checking touch buttons or can be retrofitted with existing mechanical palm buttons to create a complete,...

P. 4

TWO-HAND CONTROL MODULES DUO-TOUCH® SG Modules DUO-TOUCH® SG Two-Hand Control Modules, STB Compatible AT-..M-13A Models AT-..M-11KM Models (AT-GM-13A shown) (AT-GM-11KM shown) DUO-TOUCH® SG Two-Hand Control...

P. 5

TWO-HAND CONTROL MODULES DUO-TOUCH >SG Modules > DUO-TOUCH ή SG Kits Solid-State STB Touch Buttons (Meets Category IIIC) KitKit ComponentsIncludes 2 STB Touch Buttons & a DUO-TOUCH SG Safety ModuleDUO-TOUCH SGSafety ModuleSupplyVoltageSafetyOutputsSTB...

P. 1

SAFETY LIGHT SCREENS SAFETYLIGHT SCREENS Safety Light Screens EZ-SCREEN . . . . . . . . . . . . . . . . . . . . . . . . page 20 Ε Provides point-of-operation, area, access and perimeter safeguarding. Protects personnel from injury and equipment...

P. 2

SAFETY LIGHT SCREENS Catalog Safety Supply Maximum Type Model Page Category Resolution Voltage Range SAFETYLIGHT SCREENS Standard Systems >Cascade Systems Page 20414 & 30 mm24V dc18 m 14 & 30 mm18 m >EZ-SCREEN Grid & Point Systems...

P. 3

SAFETY LIGHT SCREENS Safety Output Muting Output Option Response Time Housing Material Environmental Rating Blanking Reduced Resolution (floating) 2-beam & Fixed 9 to 56 ms 2 PNP OSSD (Trip /Latch...

P. 4

SAFETY LIGHT SCREENS EZ-SCREEN Systems EZ-SCREEN ή SAFETYLIGHT SCREENS Safety Light Screens Simple, two-piece integrated system has no control box.Օ High-resolution 14 and 30 mm EZ-SCREEN EZ-SCREEN ή point-of-operation systems...

P. 5

SAFETY LIGHT SCREENS EZ-SCREEN >Systems > EZ-SCREEN ή Systems 45.0 mm SAFETYLIGHT SCREENS 7-segment diagnostic display Blocked beam zone indicators DetailedDimensions System status and system reset status Full View ofAvailable...

P. 1

Accessories Sensing Accessories Mounting Brackets..............................page 350 • Using the right bracket ensures optimum performance from your Banner sensors. • Stainless steel and reinforced thermoplastic...

P. 2

P. 3

Brackets Accessories Selection Chart ^.llllu 177 206 211 218 223 272 280 290 296 304 312 332 339 346 402 n ■ ■ ■ ■ ■ ■ ■ ■...

P. 4

P. 5

Brackets Accessories Selection Chart ^.llllu 177 180 206 209 211 215 218 221 223 268 272 276 280 286 290 293 296 300 304 308 312 328 332 336 339 342 346 402 402 ...

P. 1

T-GAGE Sensors Temperature Gauging Sensors M18T Temperature Sensors Ε Detects temperature difference between object and surroundings Monitors user defined window using analog or discrete outputsՕ Senses temperatures from 0 to 300а...

P. 2

M18T Ser i es329 T-GAGE Sensors M18T Sensors 18 mm stainless-steel barrel L DetailedDimensions Rugged encapsulated housing Push-button programming 2 m or 9 m unterminated cable, or 5-pin Euro-style quick disconnect 5-pin Euro-style QD cables...

P. 3

M18T Ser i es T-GAGE Sensors M18T Specifications Temperature Measurement Range 0ΰ to 300 C standard; custom ranges ava Depends on ob j ect s i ze and sens i ng f i eld of v i lable i ew, see chart below. Sensing Range and Distance to Spot...

P. 4

T-GAGE >Ser i es >T-GAGE ή Sensors MEASUREMENT & INSPECTION More i nformat i on onl i ne at bannereng i neer i ng . com 331 >

P. 5

LX Ser i es Part-Sens i ng Sensors LX High-Speed Part-Sensing Light Screen Unique beam pattern for highest sensing accuracy Spec i al synchron i zed mult i ple-beam i nfrared LED em i tters and rece i vers generate a prec i se opt i cal crosshatched...

P. 1

A-GAGE Sensors Array Gauging Sensors Measuring Light Screens A-GAGE ή MINI-ARRAY >. . . . . . . . . . . . . . . . . . . . . page 312 Ε Low-profile light screen pairs are designed for profiling and inspections. Available heights...

P. 2

A compact workhorse for inspection and profiling The programmable A-GAGE MINI-ARRAY measuring light screen system is ideal for inspection and profiling applications. Each system includes an emitter/receiver pair, one of nine controller modules and cables.Programmable...

P. 3

MINI-ARRAY Series A-GAGE ή Sensors MINI-ARRAY System W D Emitter/ReceiverModelsHousing Length (L) Ten array lengths Minimum object detection size of19 or 38 mm BMEL6..A Emitter BMRL6..A ReceiverBMEL12..A Emitter 201 mm > Emitter/receiver...

P. 4

MINI-ARRAY Series A-GAGE ή Sensors MINI-ARRAY Sensors Ζ 19.1 mm Beam Spacing DownloadPDF Models*Cable**Housing LengthTotal BeamsArrayLengthMinimum Object SizeRangeDataSheet BMEL616A BMRL616ABMEL1216A BMRL1216ABMEL1816A 356...

P. 5

MINI-ARRAY® Series A-GAGE® Sensors MINI-ARRAY® Controller Specifications Power Requirements 16 to 30V dc @1.25 amps max. (see current requirements for sensors); controller alone, (without sensors connected) requires...

P. 1

U-GAGE Sensors Ultrasonic Gauging Sensors > Ultrasonic Sensors U-GAGE ή QT50U . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 286 > Long-range ac or dc sensor covers 8 m, with minimal dead zone.Օ Advanced programming...

P. 2

QT50U Series U-GAGE Sensors QT50U Long-range Ultrasonic Sensor 200 mmMinimum Range8 mMaximum RangeDead Zone Enhanced long-range sensing Ε Senses extended range of up to 8 m Features ultrasonic dead-zone of only 2.5% of the total range՗75%...

P. 3

QT50U Series U-GAGE Sensors QT50U Sensors 74.1 mm 67.4 mm Push-button TEACH programming for easy setup DetailedDimensions Rugged encapsulated design for harsh environments Cabled or quick-disconnect models Bright LED status indicators...

P. 4

QT50U Series U-GAGE Sensors QT50U DC Specifications Effective Beam See charts EBPC-1, EBPC-2 and EBPC-3 on page 471. Supply Voltage and CurrentAnalog models: 10 to 30V dc (10% max. ripple); 40 mA max. (exclusive of load) Dual-discrete models:...

P. 5

QT50U Series U-GAGE Sensors QT50U Universal Voltage Specifications Effective Beam See charts EBPC-1, EBPC-2 and EBPC-3 on page 471. Supply Voltage 85 to 264V ac, 50/60 Hz / 24 to 250V dc (1.5 watts max. exclusive of load) Ultrasonic Frequency...

P. 1

L-GAGE Sensors Light Gauging Sensors Light Gauging Sensors L-GAGE ή LT3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 268 Exceptionally accurate advanced time-of-flight sensing technology provides precise measurements...

P. 2

Analog & discrete outputs, or dual-discrete models The LT3 can include both a discrete (switched) output and an analog output in the same unit, with independently programmable window limits. For added flexibility, the analog output is available in...

P. 3

LT3 Series L-GAGE® Sensors LT3 Sensors Programmable output response for three speeds using simple push-button TEACH Bright, visible laser spot to simplify alignment Analog outputs in a choice of 0 to 10V dc or 4 to 20 mA sourcing...

P. 4

LT3 Series L-GAGE Sensors LT3 Specifications Sensing BeamTypical beam dia: 6 mm @ 3 m Typical laser lifetime: 75,000 hours Retroreflective Mode: Diffuse Mode: 658 nm visible red IEC and CDRH Class 2 laser; 0.5 mW max. radiant output power. 0.5...

P. 5

LT3 Series L-GAGE Sensors LT3 Specifications (contΒd) LT3 Specifications Laser Control Connect red wire to +5 to 24V dc to enable laser beam; connect to 0 to +1.8V dc (or open connection) to disable; when sensor is powered laser enable time...

P. 1

Specialty Sensors PHOTOELECTRICS Specialty Sensors R58 Expert > . . . . page 206 SLC1 > . . . . . . . . . page 221 >ٕ Outstanding color contrast sensitivity even in low-contrast or high-gloss applications Ultra-fast 10 kHz switching...

P. 2

R58 Expert Series Specialty Sensors R58 Expert ٙ Register Mark Sensors Provides excellent color contrast sensitivity, detecting 16 levels of gray scaleՕ Optimizes application contrast by automatically choosing red, green or blue...

P. 3

R58 Expert Series Specialty Sensors PHOTOELECTRICS R58 Expert ٙ Sensors Easy-to-read 8-segment light bar indicator 83.3 mm DetailedDimensions Rugged zinc alloy die-cast housing High-quality acrylic lens suitable for food processing...

P. 4

R58 Expert Series Specialty Sensors R58 Expert ٙ > Specifications Supply Voltage and Current 10 to 30V dc (10% max. ripple); Supply current (exclusive of load current): 75 mA @ 10V dc35 mA @ 30V dc Supply Protection Circuitry Protected...

P. 5

QC50 Series Specialty Sensors > QC50 PHOTOELECTRICS True Color Sensor Accurately analyzes and compares colors or varying intensities of one color Օ Available in two versions for application flexibility: QC50 models for most applications...

P. 1

Fiber Systems PHOTOELECTRICS Fiber Optic Systems Fiber System Overview . . . . . . . . . . . . . . . page 164 Fiber Systems ExplainedՕ When to Use Fiber Systems Selection information for sensors and fibersՕ Choosing Plastic or Glass...

P. 2

System Overview . Fiber System The broadest selection of fiber sensors in the world. Fiber Systems Two-parl liber systems include the sensor and Ihe separately purchased app I ical ion-specific tiber. Sensor Model Models tor...

P. 3

System Overview Fiber Systems PHOTOELECTRICS Choosing Plastic or Glass Fibers Plastic fibers are for general purpose use. They tolerate severe flexing, can be cut to length in the field and cost less than glass fibers. Glass fibers are the best...

P. 4

D10 Series Fiber Systems D10 Series RedefiningHigh-Performance Fiber Optic Sensing PHOTOELECTRICS Features advanced fiber optic amplifier for use with plastic fibersՕ Available with visible red or green beam Delivers high-performance, low-contrast...

P. 5

D10 Series Fiber Systems 10.0 mm 39.5 mm PHOTOELECTRICS D10 Sensors DE L A Y - - + + L O DO 0 ms 40 ms Static and dynamic programming push buttons or manual gain potentiometer DetailedDimensions 68.1 mm Informative signal-strength readout...

P. 1

Fullsize Sensors PHOTOELECTRICS Fullsize Sensors Q45 . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 140 Extremely rugged design exceeds NEMA 6P and IEC IP67 standards; sensors withstand 1200 psi washdown.Օ Power, Signal and...

P. 2

Q45 Series Fullsize Sensors Q45 Advanced One-Piece Sensors PHOTOELECTRICS Uses extremely rugged design that exceeds NEMA 6P and IEC IP67 standards and withstands 1200 psi washdownՕ Features highly visible Power, Signal and Output indicator...

P. 3

Q45 Series Fullsize Sensors PHOTOELECTRICS Q45 Sensors 44.5 mm 57.9 mm 44.5 mm Optional 7-element LED signal strength display and/or output switching logic 54.1 mm 61.7 mm 87.6 mm 2 m or 9 m attached cable, or Mini-, Micro- and Euro-style...

P. 4

Q45 Series Fullsize Sensors Q45, 10-30V dc (contd) DownloadPDF ModelsSensing Mode/LED*RangeCable**OutputTypeExcess GainBeam PatternDataSheet SHORT RAN G ELON Q45BB6D >PHOTOELECTRICS Q45BB6DQ 450 mm2 m 4-Pin Mini QD EGCD-36(p. 436)BPD-35(p....

P. 5

Q45 Series Fullsize Sensors PHOTOELECTRICS Q45, 90-250V ac (contd) DownloadPDF ModelsSensing Mode/LED*RangeCable**OutputTypeExcess GainBeam PatternData Sheet Q45VR2LV 2 m > SPDT e/m Relay Q45VR2LVQ 5-Pin Mini QD 36339 Q45BW22LV 0.08 - 9...

P. 1

Midsize Sensors PHOTOELECTRICS Midsize Sensors WORLD-BEAM QS30 . . . . . . . . . . . . . . . page 108 Ε Universal housing offers 30 mm threaded lens or side mount. Opposed, retroreflective, diffuse, fixed-field and adjustable-field modes are...

P. 2

WORLD-BEAM QS30 Series Midsize Sensors WORLD-BEAM ή QS30 Series Universal Sensors PHOTOELECTRICS OPPOSED Features compact universal housing with 30 mm threaded lens or side mountsՕ Available with Class 1 visible laser in diffuse...

P. 3

WORLD-BEAM QS30 Series Midsize Sensors PHOTOELECTRICS WORLD-BEAM ή QS30 DC Sensors Popular 30 mm threaded lens or side mount 22.0 mm 35.0 mm Two bright LED indicators visible from 360 DetailedDimensions Extra-large Output...

P. 4

WORLD-BEAM® QS30 Series Midsize Sensors WORLD-BEAM® QS30, 10-30V dc (cont'd) u oc \- u LLI _l LU o Io X ͛. Excess Gain Beam Pattern Data Sheet EGCR-30 and EGCR-31 (p. 432) — 112355 EGCD-31...

P. 5

WORLD-BEAM QS30 Series Midsize Sensors PHOTOELECTRICS WORLD-BEAM ή > QS30 DC Specifications Beam Size AperturePolarized Laser Retroreflective models: Approx. 3 mm Diffuse Laser models: Approx. 2 mm Supply VoltageEmitter models (High-Powered):...

P. 1

Compact Sensors "0 X o o m rm O H I Compact Sensors WORLD-BEAM® QS18...............................page 66 • Universal photoelectric family offers 18 mm threaded lens or side mounts. • One sensor family...

P. 2

WORLD-BEAM QS18 Series Compact Sensors WORLD-BEAM ή QS18 Series Universal Sensors PHOTOELECTRICS LASER EMITTER Features a universal housing with an 18 mm threaded lens or side mountsՕ Replaces hundreds of other sensors Meets IP67 and...

P. 3

WORLD-BEAM QS18 Series Compact Sensors WORLD-BEAM ή QS18 Sensors PHOTOELECTRICS Optional 18 mm threaded lens mount on some models 15.0 mm 31.0 mm 35.0 mm21.0 mm15.0 mm DetailedDimensions A variety of cable and connector options...

P. 4

WORLD-BEAM QS18 Series Compact Sensors WORLD-BEAM ή QS18, 10-30V dc (contd) DownloadPDF ModelsSensing Mode/LED*RangeCable**OutputTypeExcessGainBeam PatternDataSheet QS186LE*** 15 m 2 m QS186LEQ8*** >(4500 X excess gain) PHOTOELECTRICS...

P. 5

WORLD-BEAM QS18 Series Compact Sensors WORLD-BEAM ή QS18, 10-30V dc (contd) PHOTOELECTRICS DownloadPDF ModelsSensing Mode/LED*RangeCable**OutputTypeExcessGainBeam PatternDataSheet QS18VN6D QS18VN6DQ8 4-pin Euro QD > NPN EGCD-6(p....

P. 1

Miniature Sensors PHOTOELECTRICS Miniature Sensors WORLD-BEAM Q12 . . . . . . . . . . . page 44 Ε Universal housing provides consistent mounting regardless of sensing modes. Powerful sensor fits extremely confined areas.Օ Opposed,...

P. 2

WORLD-BEAM Q12 Miniature Sensors WORLD-BEAM ή Q12 Series Universal Sensors PHOTOELECTRICS Sets a new industry standard for ultra-miniature photoelectric sensors Օ Features a housing just 22 by 8 by 12 mm with bipolar NPN/PNP...

P. 3

WORLD-BEAM Q12 Miniature Sensors PHOTOELECTRICS WORLD-BEAM ή Q12 Sensors Bright, visible red (640 nm) sensing beam 12 mm DetailedDimensions Solid-state bipolar outputs: one current sourcing (PNP) and one current sinking (NPN)...

P. 4

WORLD-BEAM® Q12 Miniature Sensors WORLD-BEAM® Q12, 10-30V dc (cont'd) u ec I- u LU _l LU o Io X Q. Range Cable** Output Type Excess Gain Beam Pattern 30 mm 2 m Threaded 4-Pin Pico Pigtail QD ...

P. 5

T8 Ser i es >Miniature Sensors T8 PHOTOELECTRICS 8 mm Threaded-Mount Right-Angle Sensors Features EZ-BEAM ծ technology, with specially designed optics and electronics for reliable sensing without adjustments Ideal for presence sensing...

P. 1

One family. Complete solutions. >

P. 2

One family. Complete solutions. Replace thousands of sensors with one universal sensor family. WORLD-BEAM sets new standards for innovative universal housing designs and sensing modes that fit almost any mounting situation and application. With WORLD-BEAM,...

P. 3

Sensor housings & modes that perfectly match your applications. WORLD-BEAM Q12 The ultra-miniature universal sensor, >page 4 Ε A new industry standard for ultra-miniature photoelectric sensors. Bipolar NPN/PNP outputs in a housing just...

P. 4

WORLD-BEAM Q12: Ultra-miniature and rugged. World standard photoelectric that fi ts almost anywhere. About the same height as a US quarter and only 8 mm wide, the Q12 is the smallest WORLD-BEAM. It fits in the most confined spaces and is completely...

P. 5

Q12: Unique overmolded design protects your process and your profi ts. TYPICAL APPLICATIONS MoreApplications Tiny but rugged, rated IP67. 12.0 mm23.0 mm8.0 mmBright LED operating status indicators visible from 360Rugged, sealed housingVariety...

P. 1

P. 2

I dit EZ SCREEN : Machine guarding just got easier. Much easier. a A simple, two-piece system with no control box. Now there's a rugged new standard for easy to use, non-contact, machine guarding systems. Choose the new, EZ-SCREEN System...

P. 3

A versatile family of guarding solutions. Point of operation. Finger, hand or ankle detection at the point of operation of the machine using 14 mm or 30 mm EZ-SCREEN. Area. Guard around a hazardous area by mounting horizontally without requiring...

P. 4

EZ-SCREEN®: Exceptional diagnostics make it the easiest system to use. EZ-SCREEN gives you more information you need. Exceptional diagnostics aid and simplify EZ-SCREEN setup, operation and maintenance. Both emitter and receiver feature...

P. 5

M Versatility to meet your control system requirements. Easy security. To prevent tampering, the EZ-SCREEN® features a lift up access cover that opens with a special tool. All emitter and receiver settings are configured behind the removable...

P. 1

EZ-LIGHT Operator Indicator Lights& Pick-to-Light Sensors First Edition >

P. 2

Innovative solutions to error-proof manufacturing lean production was first used to describe the Japanese automotive industry in the 1970s and 1980s. Specifically, how Toyota was producing more goods with less space, fewer people, less capital and less...

P. 3

Numerous products for unique solutions EZ-LIGHT Operator Indicator Lights*, page 4 > Offers a single-unit alternative to panel indicators, post and stack lightsٕ Displays multiple colors of highly visible LEDs in each unit Offers five...

P. 4

EZ-LIGHT Indicators: A smarter, more versatile industrial indicator Recipient of Control Engineeringْs 2005 Editors Choice Award and EngineersҒ Choice Award. Multi-color, General Purpose Multi-color, 7-Function Red/yellow/green multifunction...

P. 5

Available with multiple colors & functions TYPICAL APPLICATIONS MoreApplications Car Wash Status >Objective: To indicate to the customer which stage of an automatic car wash is in progress. Part Loaded Indicator EZ-LIGHT M18 EZ-LIGHT T18 18...