TG200 – Top Gauge 200 Range of modular gauge heads for machine tools
6Pages

{{requestButtons}}

Catalog excerpts

TG200 – Top Gauge 200 Range of modular gauge heads for machine tools - 1

Various options of brackets and fine slides are available. Their ensure the correct re-tooling and mechanical setup of the measuring system. The most suitable type is defined according to the destination of the machine (volumes and production flexibility), to the measuring range and to the mechanical characteristics of the working area (center height, topology of the table, etc.). In addition, coolant distributors are optionally available in order to ensure the thermal stabilization. Top Gauge 200 Modular gauge head for machine tools Sub-micron accuracy and repeatability by zeroing on master Sensitivity and linearity regardless the cable length Universal damping system for interrupted surfaces High thermal stability Body in thermally stabilized stainless steel IP67 protection degree Anti-crash solutions Resistance to chemical agents Automatic recognition of the setup parameters of the measuring head installed in the machine without calibrations (PLUG & PLAY BALANCE system). Adjustable pre-stroke and overstroke Adjustable or fixed pneumatic retraction Adjustable measuring force Wide measurement range for multi-diameter applications without retooling Accessories for quick re-tooling (slides, zeroing guides, brackets) Fully automatic production without surveillance Machine down time reduction in case of replacement due to fault or crash (PLUG & PLAY BALANCE system) Application with fixed bracket Application with quick ZERO bracket VERSATILITY Top Gauge 200 (TG200) measuring heads can be used for any in-process dimensional control. Their modularity and wide range of accessories allow the usage for all applications on precision machine tools. In combination with the VM25, VM15 and VM9-GA control units: • • Monitoring of internal and external diameters both on continuous and interrupted surfaces • • Thickness control and calibration • • Active and passive positioning on shoulders Application with fast retooling bracket Continuous or interrupted flat surfaces Taper control Roundness and shape analysis TOP GAUGE 200 measuring head is connected to the control unit with an interface designed to ensure the quality of the measurement regardless of the length of the extension cables. Specifications may be subject to change without notice. © 2016 | 02 | Balance Systems S.r.l. According to the configuration of the machine and the control unit, the interfacing signals may be: - Digital inputs and outputs - Profibus DP or Profinet - BCD or binary codes through parallel interface Balance Systems S.r.l Via Roberto Ruffilli, 8/10 20060 Pessano con Bornago (Milan) - Italy Tel. (+39) 02.9504955 Fax (+39) 02.9504977 info@balancesystems.it www.balancesystems.com The TG200 modular body is compatible with other measurement systems on the market In case of retrofitting, it is possible to adapt the components already mounted on the machine (slides, brackets and fingers), thus ensuring the system economy. The integral cable of the measuring head TG200 can be replaced without involving the transducer. Top Gauge 200 (TG200) are modular gauging heads, designed to meet any applications that require the dimensional control on grinding machines, lapping machines and high precision lathes. The measurement method is based on the comparison with respect to a master. External diameters for continuous or interrupted surfaces Internal diameters for continuous or interrupted surfaces, with or without oscillation Multi-diameters without mechanical re-tooling Continuous or interrupted flat surfaces Through feed gauge Active or passive positioning Thickness calibration Roundness and shape analysis

Open the catalog to page 1
TG200 – Top Gauge 200 Range of modular gauge heads for machine tools - 2

Various options of brackets and fine slides are available. Their ensure the correct re-tooling and mechanical setup of the measuring system. The most suitable type is defined according to the destination of the machine (volumes and production flexibility), to the measuring range and to the mechanical characteristics of the working area (center height, topology of the table, etc.). In addition, coolant distributors are optionally available in order to ensure the thermal stabilization. Top Gauge 200 Modular gauge head for machine tools Sub-micron accuracy and repeatability by zeroing on...

Open the catalog to page 2
TG200 – Top Gauge 200 Range of modular gauge heads for machine tools - 3

Accessories | Fingers and Zeroing guide • External or internal diameters on continuous or interrupted surfaces • Multi-diameter without mechanical re-tooling • Active or passive positioning on continuous or interrupted surfaces and shoulders • Active or passive centring • Lengths measuring • Continuous or interrupted flat surfaces Gauge for machine tools • Active or passive positioning on continuous or interrupted surfaces and shoulders • Active or passive centering • Distance between shoulders Integral cable with connector Measuring force adjustment As for the fingers, it is possible to...

Open the catalog to page 3
TG200 – Top Gauge 200 Range of modular gauge heads for machine tools - 4

Accessories | Fingers and Zeroing guide • External or internal diameters on continuous or interrupted surfaces • Multi-diameter without mechanical re-tooling • Active or passive positioning on continuous or interrupted surfaces and shoulders • Active or passive centring • Lengths measuring • Continuous or interrupted flat surfaces Gauge for machine tools • Active or passive positioning on continuous or interrupted surfaces and shoulders • Active or passive centering • Distance between shoulders Integral cable with connector Measuring force adjustment As for the fingers, it is possible to...

Open the catalog to page 4
TG200 – Top Gauge 200 Range of modular gauge heads for machine tools - 5

Accessories | Fingers and Zeroing guide • External or internal diameters on continuous or interrupted surfaces • Multi-diameter without mechanical re-tooling • Active or passive positioning on continuous or interrupted surfaces and shoulders • Active or passive centring • Lengths measuring • Continuous or interrupted flat surfaces Gauge for machine tools • Active or passive positioning on continuous or interrupted surfaces and shoulders • Active or passive centering • Distance between shoulders Integral cable with connector Measuring force adjustment As for the fingers, it is possible to...

Open the catalog to page 5

All Balance Systems S.r.l catalogs and technical brochures

  1. EP2-TS - EN

    3 Pages