Text version of the page

Product line overview

Positioning system ELZ/ELZex 30, 40, 60, 80, 80S, 100, 125

Mechanical system with roll-guidings outside of profile. System is belt driven. ELZex like ELZ. The positioning system is suitable for use according to the intended purpose in potentially explosive areas (see ATEX 95 marking).
Variation:

Positioning system MLZ 60, 80, 80S, 100

Mechanical system with roll-guidings outside of profile. The system is driven by a belt that is guided inside of the profile.
Repeating accuracy: ± 0,1 mm
Velocity: max. 10 m/sec (ELZex: max. 1m/sec, MLZ: max. 8 m/sec)

Positioning systemELZG 30, 40, 60, 80, 80S

Mechanical system with 2 roll-guidings outside of profile. System is driven by one rotating timing belt. At each end of this belt a carriage is fixed. Result is two carriages moving in opposite direction over the complete length of leading profile.
Repeating accuracy: ± 0,1 mm
Velocity: max. 10 m/sec

Positioning system ELZZ 60, 80, 80S, 100, 125

Same function as ELZ, but each carrier with separate drive. Parted pulleys are separately beared, so two parallel moving belts are connected each with one carriage.
Repeating accuracy: ± 0,1 mm
Velocity: max. 5 m/sec

Positioning system ELSZ 30, 40, 60, 80, 80S, 100, 125

Same function as ELZ, but with driven carriage.
Repeating accuracy: ± 0,1 mm
Velocity: max. 6 m/sec

Positioning system ELSD 40, 60, 80, 80S, 100

Same function as ELSZ. An additional turning shaft is integrated into the leading-profile. Grippers and other components can be adapted to the shaft.
Repeating accuracy: ± 0,1 mm
Velocity: max. 6 m/sec 3