BDT31-01 - Contact device with Makrolon hood
1Pages

{{requestButtons}}

Catalog excerpts

BDT31-01 - Contact device with Makrolon hood - 1

mounting variations type A bottom connection, direct mounting type B panel mounting, clamp fixing, back connection type C surface mounting, bottom connection type D back connection, direct mounting type E panel mounting, back connection type F panel mounting, bottom connection technical specification model BDT31 Transparent MAKROLON hoods are with an integrated contact device and has the advantage that it can be easily mounted on the gauge. There is no need for wiring etc. because this is part of the device which gives greater flexibility to distributors. Instead of a high casing with transparent window, the hood may be fastened on to a standard casing of the pressure gauge with the help of a bayonet or push on bezel ring. The centre hole is provided with an adjustable lock to set the contacts. The contact connection wires may be passed through the dial face to a cable connection box or a plug connector or standard plain wiring coming out through a PG cable gland on the side of the casing. If the wires are intended to be taken out of the hood at the side through a PG cable gland there is a special version available. The BDT31 devices can be build on gauges with brass or stainless steel internals. When ordering specify the type of pressure gauge and the type of contact required. For example. BDT18 with BDT31/ M1. Note: snap action contracs by magnets. available with single or double acting contacts. options and special executions at extra cost low action contacts S1/S2/S3/S11/S12/S21/S22/S33 magnet contacts M1/M2/M3/M11/M12/M21/M22/M33 inductive contacts I1/I2/I11/I12/I21/I22 electronic contacts E1/E2/E11/E12/E21/E22 62 For technical data sheets and dimensional drawings please refer to our website www.badotherm.com 29/01/2008 rev 2-B 1.1.4. pressure instrumentation BDT31-01 contact device with MAKROLON hood Badotherm model BDT31-01 series is a contact device with a MAKROLON hood as protection that can be fitted to a specified pressure gauge. It is available as 100/160 mm dia. and can be used in conjunction with BDT1/10/18/20 etc.

Open the catalog to page 1

All Badotherm Group catalogs and technical brochures

  1. US FH

    3 Pages

  2. BRC

    3 Pages

  3. EXT

    3 Pages

  4. BC

    4 Pages

  5. Thermowells

    14 Pages

Archived catalogs