• Products
  • Catalogues
  • Projects
  • News & Trends
  • Exhibitions

Mills and schredders (Grating, Hammer and Crushing) - 2 Pages

  1. P. 1

  2. P. 2

Catalogue excerpts

MILLS Applications B&P mills are used in the food industry for processing fruits and vegetables. These systems are used to grind the product to mash. Bearing in mind the subsequent pressing stage, the desired grain size is approx. 5-8 mm, which can be achieved using the solutions described below. Grating mill The mill consists of a housing in which the shaft of the main frame and the motor is fitted. The feed screw and the rotor are installed on the shaft, while inside the housing there is a set of grinding blades. The mill is driven by an electrical motor which is coupled to the shaft via an articulated coupling. The outlet funnel is installed in the bottom section of the housing. The complete unit is supported by a steel frame. Power input Hammer mill This system is designed to produce mash from vegetables and stone-free fruits. The raw material is fed into the mill via a loading chute and ground by a beater shaft. The mash is discharged by being pressed through a perforated plate, which is very easy to replace. Power input

 Open the catalogue to page 1

MILLS Centrifugal mill This system is optimal for grinding stone fruits. The ground material is hurled by a multiple-blade rotor in the mill cylinder against a blade-like perforated stainless steel sheet. The mash is discharged via a sieve opening. The tiller blades are available with various toothing sets. Power input Tiller blades Crushing mill This mill is perfect for mashing berry and stone fruits such as cherries. It consists of two stainless steel rollers mounted on a frame, with the rollers being driven by a gear motor. The distance between the rollers is adjusted manually, allowing for...

 Open the catalogue to page 2

All B&P Engineering catalogues and technical brochures

  1. Roll feeder

    2 Pages

    En
  2. SCREW CONVEYOR

    2 Pages

    En
  3. CIP STATION

    2 Pages

    En
  4. CONVEYOR BELTS

    2 Pages

    En
  5. VISUALISATION

    2 Pages

    En