Triple Output Programmable DC Power Supply - B&K Precision - #1

Text version of the page

Vol tage Current Output Ratings 0 ~ 30V (Ch1 & Ch2) 0 ~ 3A (Ch1 & Ch2) 0 ~ 5V (CH3) 0 ~ 3A (CH3) Load Regulation ±(% of output+offset) 0.01% + 3mV 0.01% + 3mA Line Regulation ±(% of output+offset) 0.01% + 3mV 0.1% + 3mA Programming Resolution 1mV 1mA Readback Resolution 1mV 1mA Programming accuracy 12 month, (at 25°C ± 5°C) 0.03% + 10mV 0.1% +5mA ±(% of output+offset) Readback accuracy 12 month, (at 25°C ± 5°C) ±(% of output+offset) 0.03% + 10mV 0.1% +5mA Temperature Coefficient (0°C ~ 40°C) ±(% of output+offset) 0.03%+10mV 0.1%+5mA Readback Temperature Coefficient ±(% of output+offset) 0.03%+10mV 0.1%+5mA Tracking Accuracy Series Operation 0.05%+10mA Tracking Accuracy Parallel Operation 0.02%+5mV 0.1%+20mA Ripple 1mVrms/3mVp-p Noise 3mVrms Transient Response < 500 ìs for CH1&2, <200 ìs for CH3 for output to recover to within 75 mV following a change from 100 mA to 1 A General State Storage Memory 50 memory locations Timer Resolution:1s, Range: 1s~999999s Weight 19.8 lbs. (9kg) Dimensions (W x H x D) 8.45" x 3.47" x 13.9" 214.5mm x 88.2mm x 354.6mm The 9130 is a fully programmable triple Output DC Power Supply delivering 0-30V/0-3A on 2 outputs and 0-5V/0-3A on 1 output. Each output is fully floating and outputs can be adjusted independently or connected in series or parallel to produce higher voltages or currents. The 9130 is ideally suited for applications in Electronic Test, Production and Service where multiple independent DC supplies are required and bench space is at a premium.
3 independent, fully programmable and electrically isolated outputs
Display & adjust Voltage and Current settings for all 3 channels simultaneously
Flexible output configuration: Connect any 2 or all 3 channels in parallel
Excellent stability and regulation
Very compact foot print (rack mountable 2U x 1/2U)
SCPI compatible command set. Communicate via USB interface, using the included USB to TTL Serial Converter cable. A RS232 interface cable, converting from RS232 to TTL, is optional (order IT-E131)
OVP (Over Voltage) and OTP (Over Temperature) protection
Output on/off control
Application Software for front panel emulation and simple test sequence generation included
50 memory locations for instrument state storage & recall
Closed case calibration SUPPLIED: Line Cord, Manual, USB communication cable, software installation disk OPTIONAL: RS232 to TTL Serial Converter cable IT-E131. Data sheet Technical data subject to change © B&K Precision Corp. 2008 v031609 www.bk precision.com Tel.: 714.921.9095 Triple Output Programmable DC Power Supply Model 9130 Specifications 9130 One Year Warranty model