Handheld NTSC Generator - 1 Pages

  1. P. 1

Catalogue excerpts

Chroma Accuracy Staircase Rasters Window Convergence RF Output Level Impedance Stability S-Video Composite Video Amplitude Impedance RGB Output Patterns White (75% or 100%, switch selectable) Yellow, Cyan, Green, Magenta, Red, Blue, Black (7.5% set-up) Switch Selectable ±5˚ and ±5 IEEE COLOR OFF obtains staircase from color bars Black Does not apply Center dot 7x11 dots 7x11 crosshatch Center Cross Channels: CH 3, CH 4, IF . 61.25, 67.25, 45.75 MHz±0.008 MHz 10 mV rms minimum into 75Ω 75Ω Does not apply 1V p-p into 75Ω Negative or positive polarity sync available Variable 0 to ±1.2V p-p into 75Ω Calibrated 1V p-p position with negative sync. 75 Ω White, Yellow, Cyan, Green, Magenta, Red, Blue, and Black Auto/Manual Linear staircase signal with 5 equal steps from black to white White, Red, Green, Blue, Yellow, Cyan, Magenta, and Black White window on black background 15 vertical x 11 horizontal white dots on black raster white lines on black raster Centering Box on screen Circle with 1x1 crosshatch CH3 = 61.25MHz, crystal controlled Horizontal Vertical Impedance Color Subcarrier Power Source NTSC-M TTL level; interlace for NTSC color bars and switch selectable interlace or progressive for convergence patterns (negative polarity sync) TTL level (Positive polarity sync.) TTL level (Positive polarity sync.) 75Ω NTSC signal: 3.579545 MHz (+50Hz) 105 to 130VAC, 60Hz, 8W Operating Temperature Dimensions Weight Accessories SUPPLIED: instruction Manual, 9V battery (1211E) OPTIONAL: BE-12 AC adapter ■ NTSC color bar pattern, ±5 and ±5 IEEE units ■ CH 3, CH 4, and IF outputs crystal controlled ■ Calibrated 1Vp-p or variable composite video output ■ RGB outputs on BNC or 9-pin ■ Composite sync, vertical sync, and horizontal sync outputs ■ Interlaced or progressive scan ■ 30 Hz signal is provided for isolation of servo problems in VCR’s Model 1211E Does not apply Sync Outputs Composite The 1249B is ideal for comprehensive testing, servicing and adjustment of video and television equipment, television receivers, video tape recorders, video monitors, closed circuit television systems and components, and master antenna systems and components. D connector 75Ω 50 ppm. Chrominance Output: 0.75V p-p into 75Ω Luminance plus Sync Output: 1V p-p into 75Ω 1.2V p-p into 75Ω BNC and D-Type Sub-Miniature Connectors. convergence and color bars TTL level and low level, (0.8±0.2V), switch selectable 75Ω 4.5 MHz ±0.2% modulated by approximately 1 kHz audio tone, switch selectable Level Impedance Sound NTSC Generator with RGB 9V battery or AC Adapter (not included) (9V DC, 100mA 5.5mm x 2.5mm center pin) 1.5 x 3.8 x 5.7" (38 x 97 x 145mm) 9.6oz. (272g) Portable NTSC Pattern Generator with S-Video, Composite Video and RF outputs This handheld NTSC Pattern Generator is powered by a 9 volt battery or AC adapter providing NTSC color bars, crosshatch, dot, staircase, circle, center cross, windows, and a full range of color raster patterns. The outputs available are composite video via RCA connector, a RF output BNC connector, or an S-Video mini-DIN output. Signals can be produced as an interlaced or progressive scanning mode. ■ S-Video, composite video, RF output ■ Interlace or progressive scanning system ■ 9VDC battery (included) ■ AC adapter available

 Open the catalogue to page 1

All B&K Precision catalogues and technical brochures

  1. LCR Meter

    1 Pages

    En
  2. 9110 & 9111

    1 Pages

    En
  3. 1651A & 1652

    1 Pages

    En
  4. Model 1692

    1 Pages

    En
  5. Models 167x A

    1 Pages

    En
  6. 9200 Series

    4 Pages

    En
  7. XLN series

    5 Pages

    En
  8. 9800 series

    5 Pages

    En
  9. Component Tester

    1 Pages

    En
  10. Light Meter

    1 Pages

    En

Archived catalogues