Deluxe Multi-Network Cable Tester - 2 Pages

Add to MyDirectIndustry favorites
Deluxe Multi-Network Cable Tester
  1. P. 1

  2. P. 2

Catalogue excerpts

Specifications 230A Cable Type 10BaseT 10Base2 100BaseTx RJ45 RJ11 356A TIA-568A TIA-568B Token Ring Test Type Open Short Reverse Cross Split Power Source Dimensions (HxWxD) Weight Accessories SUPPLIED: Master Unit Remote Terminator One Year Warranty Master Unit Remote Terminator 3 Patch Cables BNC to BNC adapter Master Unit Remote Terminator Carrying Case Model 231A Deluxe Multi-Network Cable Tester Model 230A Multi-Network Cable Tester The 230A tests thin Ethernet (BNC), 10BaseT (UTP/STP), 100BaseTx, RJ45, TIA568A, TIA-568B, and Token Ring cables within a few seconds. It detects miswiring, polarization, and continuity. The 230A also tests the ground of shielded twisted pair cables. With the remote unit, you can remotely test installed cable either from the wall plate or patch panel. ■ Auto scans thin Ethernet (BNC),10Base T (UTP/STP), 100BaseTx, RJ45, 356A,TIA-568A,TIA-568B, and Token Ring cables in seconds ■ Detects miswiring, polarization, and continuity ■ Also tests the ground of shielded twisted pair cables ■ Tests cables before or after installation with the remote unit ■ LED display for clear indication of problems ■ Protective rubber boot ■ Belt clip The 231A can easily read the correct pin configuration of 10BaseT cable (category 5), 100BaseTx, 10Base2 cable (coax) and RJ45/RJ11 modular cables, 356A, TIA-568A, TIA-568B and Token Ring cables by comparing one transmitting end to the corresponding receiving end. With the remote kit, it can test cables installed far away either on wall plate or patch panel up to 1000ft away. It is easy to verify the cable continuity, open, short, and cross connect, featuring auto or manual scan for pin-out indicators. ■ Tests 10BaseT, 100BaseTx, 10Base2, RJ45, RJ11, 356A, TIA-568A,TIA-568B, and Token Ring cables ■ Detects open, short, cross, and continuity ■ Tests Point-to-Point, rather than Pair-to-Pair ■ Quick and easy to use ■ Tests cables on wall plate or patch panel up to 1000 ft away with the remote kit ■ Easy to read LED display ■ Protective rubber boot ■ Belt clip

 Open the catalogue to page 1

Model 235 Remote Network Cable Tester The 235 network cable tester is an easy and effective cable tester which can test all the wiring faults of 10Base2 (Coax), 10BaseTx, 100Base Tx, RJ45, 356A, TIA-568A, TIA-568B and Token Ring cables. It can identify not only the wiring faults, such as open pairs, shorted pairs, reversed pairs, crossed pairs and split pairs, but can also identify up to 4 different cables at one end. A large flashing LED displays the fault code, and the 4 pairs individual LEDs tells you which pairs are tested. The remote identifiers are provided to make a remote test. Just push...

 Open the catalogue to page 2

All B&K Precision catalogues and technical brochures

  1. Model 627

    1 Pages

    En
  2. Model 625

    1 Pages

    En
  3. Model 635

    1 Pages

    En
  4. Model 710

    1 Pages

    En
  5. Model 636

    1 Pages

    En
  6. Model 615

    1 Pages

    En
  7. Model 630

    1 Pages

    En
  8. Model 1211E

    1 Pages

    En
  9. Model 231A

    2 Pages

    En
  10. Model 262

    1 Pages

    En
  11. LCR Meter

    1 Pages

    En
  12. 9110 & 9111

    1 Pages

    En
  13. 1651A & 1652

    1 Pages

    En
  14. Model 1692

    1 Pages

    En
  15. Models 167x A

    1 Pages

    En
  16. 9200 Series

    4 Pages

    En
  17. XLN series

    5 Pages

    En
  18. 9800 series

    5 Pages

    En
  19. Component Tester

    1 Pages

    En
  20. Light Meter

    1 Pages

    En

Archived catalogues