6010 ds
table.main {}
tr.row {}
td.cell {}
div.block {}
div.paragraph {}
.font0 { font:6.00pt "Arial", sans-serif; }
.font1 { font:7.00pt "Arial", sans-serif; }
.font2 { font:8.00pt "Arial", sans-serif; }
.font3 { font:9.00pt "Arial", sans-serif; }
.font4 { font:13.00pt "Arial", sans-serif; }
Digital Storage Oscilloscopes Models 2534, 2540 & 2542
Spécifications
model
2534
2540
2542
Automatic Waveform Measurement '
Time
Rise time, Fall Time, Cycle Frequency, Period, Positive Pulse Width, Negative Pulse width, Delay, Phase, X at Min, X at Max
Voltage
MAX, MIN, Peak-Peak, Average, Vrms, High, Low, Amplitude, Cycle RMS, Cycle Average, Overshoot, Preshoot
Frequency
Hardware counter provides frequency readout of
trigger source with 5 digit resolution
Waveform Math
Math function
FFT, add, subtract, multiply
FFT
Windows: Hanning, Hamming, Blackman, Rectangular, Flattop,
2048 sample points
Autoset
Single button automatic setup of both channels for vertical, horizontal and trigger systems
Display
Display Mode
1/4 VGA (5.7") 256 color LCD (320x240) with adjustable contrast and inverse video
Display Types
Point, Vector
Persistence
Off, infinite
Waveform Interpolation
Sin(x)/x, Linear
Format
YT and XY
Power Requirements
100-240 VAC, 50 VAmax, 47 Hz to 440 Hz
Environmental
Temperature
Operating: 0° C to +40° C Nonoperating: -20° C to +55° C
Humidity
Operating: 95 % RH, 40° C Nonoperating: 90 % RH, 55° C
Altitude
Operating to 3000 m
Pollution Degree
Pollution degree 2 for indoor use only.
Electromagnetic compatibility and Safety
EMC
This
oscilloscope is in compliance with council EMC directive 2004/108/EC
Safety
EN61010-1:2001
General
Dimensions
Width x Height x Depth
310 mm (W) x 147 mm (H) x 269 mm (D) 12.2 in x 5.8 in x 10.6 in
Weight
3.6 kg (8 lbs)
Two Year Warranty
Performance Characteristics
Bandwidth
60 MHz
60 MHz
100 MHz
Real time sample rate (2 channels interleaved)
400 MSa/s
1 GSa/s
Channels
2
Display
5.7 inch (145 mm) diagonal Color LCD
Rise Time
<5.83 ns
<5.83 ns
<3.50 ns
Record Length
4000 points
Vertical Resolution
8 bits
Vertical Sensitivity
2 mV - 5 V/div
DC gain accuracy
±3.0 %
Maximum Input Voltage
400 Vpk, CAT II (between signal and reference BNC connector)
Position Range
± 8 divisions from center of screen
Bandwidth Limit
20 MHz
Time Base range
2.5 ns/div - 50 s/div (2534)
2 ns/div - 50 s/div (2540 & 2542)
Timebase accuracy
100 ppm
Input Coupling
AC, DC, GND
Input Impedance
1 MQ in parallel with19 pf
Vertical and Horizontal Zoom
Vertically or horizontal^ expand or compress a live or stopped waveform
I/O interface
USB host port on front panel supports USB flash drives. USB device port for connection to PC (Requires included Comsoft Software for use)
Acquisition Modes
Sample
Display sample data only
Peak Detect
Average
Waveform averaged, selectable from 2, 4, 16, 32, 64, 128, 256
Roll Mode
For time base settings 500 ms/div-50 s/div
Trigger System
Trigger Types
Edge, Pulse Width, Video*
Trigger Modes
Auto, Normal, Single
Trigger Coupling
AC, DC, LF reject, HF reject
Trigger Source
CH1, CH2, AC line, Ext, Ext/5, Alternate
*Support formats PAL/SECAM, NTSC. Triggers on odd or even field, all lines or line number Cursors
Types
Amplitude, Time
Measurements
AV AT, 1/AT
Accessories
Supplied: User Manual, Two 150 MHz 10:1 passive probes (model PR 37A),
Power cord , USB interface cable, Comsoft Software Installation disk Optional: PR 32A Demodulator Probe, PR 55 High Voltage Probe
4
www.bkprecision.com
