flat flexible cables and flat flexible assemblies - Axon Cable - #39

Text version of the page

Indentification code for AXOJUMP® Flat Flexible Cables www.axon-cable.com - RELEASED AUGUST 2009 © 2009 - AXON’ CABLE - FLAT FLEXIBLE CABLES AND FLAT CABLE ASSEMBLIES General drawing Reinforcement length F2 Insulated length L Strip length S1 Strip length S2 Pitch P Span E Width w Margin M Reinforcement length F1 FFC 1.00 A 20/ 0075 S 5.0-5.0- 10.0-10.0 F A BB/ G 2-7 Option S: Aluminium shielding without grounding G: Grounded Aluminium shielding + n° of grounded conductors PS: Painted shielding without grounding PG: Painted shielding with grounding + n° of grounded conductors AU: Gold plated contacts M: Ink-jet marking N: Notches, punchings L: Adhesive labels on the cable F1: Foldings + n° of folds R1: Marking of a line on the reinforcements + n° of markings V1: Additional reinforcement tape + n° of additional reinforcements UL marking of the insulation tape A: tape without UL marking B: tape with UL marking Type of conductor S: static F: flexible (50 ìm) E: extra-flexible (35 ìm) U: ultra-flexible (25 ìm) Reinforcement length F1 and F2 in mm Strip length S1 and S2 in mm Type of insulation tape: S / E / L / H / K / X Insulated length in mm Number of conductors Pitch in mm: 0.30 / 0.50 / 0.80 / 1.00 / 1.25 / 1.27 / 2.54 Flat Flexible Cable Type of connection A: one reinforcement at each end on the same side of the FFC B: one single reinforcement C: no reinforcement D: one reinforcement at each end on opposite sides of the FFC B, J, K: Blue Polyester R: Red Polyester W: White Polyester H: Polyimide E: Polyester « Easy-to-insert » type “-”: No reinforcement T : « Bus bar » type Definition of the connection F1 and F2