Text version of the page

LL

AKEAKE

MM

ONITONITORSORS Used to detect insufficientflow conditions for automated or controlled shielded welding processes.

WWeld Shieldeld ShieldGas FGas Flolow Switcw Switchh

FOR 1/4"- 3/8" PIPE SIZES AN APPLICATION SPECIFICPRODUCT OFFERING MULTIPLE CALIBRATIONSAVAILABLE
Lake’s Weld Shield Gas Flow Switch has beendeveloped specifically for use in harsh welding applications and will hold up to the typical conditions of the welding environment. This blind switch is offered with various gascalibrations and in two ranges to complement the variety of shielding gases and flow rates commonly used. DETECT SYSTEM FLOW PROBLEMS UNRESTRICTED MOUNTING
Use the Weld Shield Gas Flow Switch to give your PLC or control system a signal that allows for simple detection of flow problems. Accurate detection can be achieved in any mounting orientation, without the straight pipe required with other analyzer systems. FIELD ADJUSTABLE
The Weld Shield Gas Flow Switch has a low/no flow “fault” indicator set-point that is adjustable within the lower two thirds of the range in question. Weld Gas Switch Application NON-POWERED
Without batteries to fail or other electrical power considerations, the switch will provide a lifetime of simple and reliable operation. METRIC AND US/STANDARDINDICATING RANGES
These indicators are offered with metricand standard units of measure.

www.lakemonitors.com