Text version of the page

FlowStat FlowStat

® ®

– Turine Flow Sensor – Turine Flow Sensor

TYPICAL PRESSRE IFFERENTIALS MATERIALS OF CONSTRCTION

WETTED COMPONENTS: Casing:Stainless Steel 6 Cover:Stainless Steel 6 optional clear polycarbonate Seal:Buna-N other options available Turbine:Acetal copolymer Bearing:PEE Polyetheretherketone Shaft :Stainless steel NON-WETTED COMPONENTS: Encapsulant:Epoxy Strain relief:Nylon Lock Ring:Stainless steelWire insulation:High temperature PC

PERFORMANCE

Measuring accuracy:±2% of full-scale Repeatability:±0.5% of full-scale Flow Measuring Range: /2 porting, 0.5–5 GPM 2–60 LPM /4 – porting, .5–50 GPM 60–200 LPM Turndown Ratio:0: Temperature Range:20-225F - to 0C Pressure Range:to 500 PSIG 4 bar W/optional clear coverto 200 PSIG 4 bar Pressure Differential:See graphs on the right for typical pressure differentials. Filtration requirements:50 micron filter recommended

ELECTRONIC SPECIFICATIONS

4-20 mA ERSION: Power Requirements: 2–5 dC, loop-powered Load driving capacity: 50 Ohms max Maximum transmitting distance: Limited only by wire resistance supply voltage Response time: 2 seconds to 0% step change in flow rate Resolution: Infinite Over-current limit: Self limiting at 5mA Other protection: Reverse polarity 0-5 DC ERSION: Power Requirements: 2-5 DC Maximum Current: 25 mA DC Minimum Load Resistance: 000 Ohms Maximum transmission distance:200 ft. recommended Resolution: Infinite Response time: 2 seconds to 0% step change in flow rate PULSE OUTPUT ERSION:Type: wire, hall effect Power Requirements: 5-24 DC Maximum current: 25mADC Maximum transmission distance:200ft. recommended

MECANICAL

DIM2 NPTF4 NPTF NPTF A.4 4mm.06 mm B. 2mm. 4mm C2.00 5mm2.46 62mm

www.lakemonitors.com

D2.45 62mm2. mm

AW-LAE COMPAN

D2.45 62mm2. mm E.0 4mm5.25 mm F2.6 6mm.0 mm

A TASI Group Company 0 Industrial Dr., Franksville,WI526262.4.00 / Fax: 262.4.000.50.60

* Dimensions wit optional clear polycarbonate coer installed. SDS-1106 7.5M MR / WGD / MAS © 2006 AW-Lake oan