High Temp Flow Meter Data Sheet - AW-Lake Company - #2

/ 2


catalogue search
P. 01
P. 02
Pages:


See other catalogues for AW-Lake Company

Text version of the page
TYPICAL PRESSURE DIFFERENTIALS
For specific differential graphs, refer to Lake data sheet PDDS-404.
High Temperature Flow Rate Monitors
MATERIALS OF CONSTRUCTION (WETTED COMPONENTS)
SERIES 5 MONITORS
1-1/4"- Z"
ALUMINUM
BRASS
STAINLESS STEEL
High-pressure casing, end ports and tapered shaft
Aluminum
Brass
#303 Stainless Steel
Seals H-Series (400°F) J-Series (600°F)
Mton® w/Teflon® backup Kalrez® w/Teflon backup
Viton® w/Teflon® backup
Kalrez® w/Teflon backup
Viton® w/Teflon® backup
Kalrez® w/Teflon® backup
Transfer Magnet
Teflon® coated Alnico
Teflon® coated Alnico
Teflon® coated Alnico
Floating Orifice Disk
Stainless Steel
Stainless Steel
Stainless Steel
All other internal parts
Stainless Steel
Stainless Steel
Stainless Steel
Teflon is a registered trademark of DuPont de Nemours & Co.
Viton and Kalrez are registered tradem arks of Dow DuPont Elastom ers
1 MATERIALS OF CONSTRUCTION (NON-WETTED COMPONENTS)
ALUMINUM
BRASS
STAINLESS STEEL
Window Tube
Pyrex
Pyrex
Pyrex
Window Seals
Teflon®
Teflon®
Teflon®
40
0 10 30 50 70 90 110 130 150
F tOW Mit Of M
Teflon is a registered trademark of DuPont de Nemours & Co.
PERFORMANCE
Measuring accuracy:
±2.5% of full-scale in the center third of the measuring range; ±4% in upper and lower thirds
Repeatability:
±1% of full-scale
Flow measuring range:
0.05-150 GPM (0.2 - 560 LPM)
Pressure differential:
See graphs on the right for typical pressure differentials. For specific differential information, refer to Lake data sheet PDDS-404.
Maximum operating pressure1 :
aluminum and brass monitors: 3500 PSIG (240 Bar) stainless steel monitors: 6000 PSIG (410 Bar)
Maximum operating temperature:
H-Series 400°F (204°C) J-Series 600°F (315°C)
Standard calibration fluids:
Oil monitors: DTE 25® @ 110°F (43°C), 0.873 sg Water monitors: tap water @ 70°F (21°C), 1.0 sg Air monitors: air @ 70°F (21°C), 1.0 sg and 100 PSIG (6.8 Bar)
Filtration requirements:
74 micron filter or 200 mesh screen minimum
SERIES 3 MONITORS
I iow hai I am
Note: Consult factory for Temperature/Pressure De-rating Chart
DTE 25 is a registered tradem ark of Exxon Mobil
MECHANICAL SIZE CODE
1 '---r
1 . 1
____---[
-
SERIES 2 MONITORS
-------A--------- h-B
DIM
SERIES 2
SERIES 3
SERIES 4
SERIES 5
SERIES 5
A
1-1/4"
1-7/8"
2-3/8"
3-1/2"
3-1/2"
(32mm)
(48mm)
(60mm)
(90mm)
(90mm)
B
4-13/16"
6-9/16"
7-5/32"
10-1/8"
12-5/8"
(122MM)
(167MM)
(182mm)
(258mm)
(322mm)
Port Sizes
NPTF: 1/8", 1/4"
NPTF: 1/4", 3/8", 1/2"
NPTF: 3/4", 1"
NPTF: 1-1/4", 1-1/2"
NPTF: 2"
SAE: #6, #8, #10
SAE: #12, #16
SAE: #20, #24
SAE: #32
BSP: 3/8", 1/2"
BSP: 3/4", 1"
BSP: 1-1/4", 1-1/2"
BSP: 2"
mm »ah nr«
Note: Consult factory for SAE brass monitor requirements.
MONITORS INC
Division of Total Automated Solutions, Inc.
LAKE MONITORS, 2013 South 37th Street, Milwaukee, W 53215 414.671.3577 / 800.850.6110 / Fax: 414.671.5253
www. lakemonitors. com
HJDS-404 7.5M CK / WGD / MAS © Lake Monitors Inc. 2004

pageCatalog pdf di En 2012-05-22-28