Text version of the page

lowtat conom low ensorlowtat conom low ensor

WETTED COMPONENTS:Sensor Body:Glass-Filled Polypropylene Cover:Clear Polycarbonate Seal:Buna-N (standard) Turbine:Acetal Copolymer Bearing:PEEK Shaft:Stainless Steel NON-WETTED:Encapsulant:Epoxy Strain Relief:Nylon Lock Ring:Glass-Filled PolypropyleneWire Insulation:High-Temperature PVC Measuring Accuracy:±2% of full-scale Repeatability: ±0.5% of full-scale Turndown ratio: 10:1Flow Measuring Range: 0.5-15 GPM (2-60 LPM) Measurements shown are in inches. With optional low-flow adapter: 0.1-4.0 GPM (0.4-15 LPM) Temperature Range: 20-150°F Maximum Pressure: 150 PSIG Pressure differential:See graph on right Standard calibration media: Tap water @ 70°F Temperature 4-20 mA version:Power Requirements:12-35 VDC, loop powered Load driving capacity:1150 Ohms maximum Maximum transmitting distance:Limited only by wire resistance & supply voltage Response time:2 seconds to 90% (step change) Resolution:Infinite Over-current limit:Self limiting at 35 mA Other protection:Reverse polarity 0-5VDC Version:Power Requirements:12-35 VDC Maximum current:25 mA DC Minimum load resistance:1000 Ohms Maximum transmission distance:200 feet recommended Resolution:Infinite Response time:

LAKE MONITORS, 2013 South 37th Street, Milwaukee, WI 53215414.671.3577 / 800.850.6110 / Fax: 414.671.5253

Division of Total Automated Solutions, Inc. FSES-105 10M CK / WGD / MAS © Lake Monitors Inc. 2005

www.lakemonitors.com