Zinc Oxide Varistors Taping Characteristics
TAPING OF OUR VARISTORS IS MADE ACCORDING TO IEC 286-2
Types: VE07/09 - VF05/07
Types: VE13/17 - VF10/14
hhH P
dWEtABW p p
1 1 2 EI H
1 HP H
W
W
1 2 D
Cross sectionDirection of unreeling
Marking onthis side Adhesivetape
Reference plane P
A - B hh P
dWABW p p
Marking onthis side Adhesivetape Reference plane H
1 2 H
1 EI H H
W
W
1 2 D
P
1 Cross sectionDirection of unreeling A - B P
Et
DIMENSIONS:
millimeters (inches)
DIMENSIONS:
millimeters (inches)
Dimension CharacteristicsValueTolerance Dimension CharacteristicsValueTolerance Leading tape width18(.709)+1/-0.5WThe hold down tape shallAdhesive tape widthnot protrude beyond theW Sprocket holes pitch12.7 (0.50)±0.3P
Distance between the sprocket3.8 (.150)±0.7P carrier tape hole axe and the lead axe
1 Sprocket hole position 9(.354)+0.75/-0.5W
1 Total thickness of tape0.9 (.035) maxt Distance between the tops of the tape and the adhesive 3(.118) maxW
2 Verticality of components0±2 p Diameter of sprocket hole 4(.157)±0.2D Alignment of components0±2 h
Distance between the tape axisand the bottom plane of 16/(.630)/±0.5/H component body or 18(.709)-0/+2 Distance between the tape axis 16/(.630)/±0.5/H and the kink or 18(.709)-0/+2 Distance between the tape axisand the top of component body VE 07/09 - VF 05/0733.0 (1.30) maxH
1 VE 13/17 - VF 10/1445.0 (1.77) max Lead diameter 0.60.8+10%d (.024)(.031)-0.05 Protrusions beyond the lower side of the hold down tapeLead spacing 5(.197) maxI
2 5.087.62±0.8E (0.20)(0.30) Components pitch 12.725.4±0.3p(0.50)(0.10)
31