Varicon

®

Series 8218 – 0.050" Staggered Dual Row

FEATURES

•High contact density•For parallel or perpendicular p.c. card mounting•High mounting density (.050" centers, minimum)•Nylon end sections for mounting and card guidance•Mounting hardware supplied with connector•Mates with 8219 Series

Insulator Material: Dielectric Withstanding Voltage: Diallyl phthalate, glass-filled, flame resistant, end guides: nylon Insertion/Withdrawal Force: Sea Level:1000 Volts rms 3.4" Hg:500 Volts rms

TECHNICAL SPECIFICATIONSORDERING CODE

2 to 16 ounces per contact Current Rating: Insulation Resistance: 5 amperes, maximum 5,000 megohms, minimum Contact Resistance: 0.005 ohm, maximum
Number of Contacts Contact Material and Plating:
002 to 076 for connectorswithout center guide Phosphor Bronze nickel plate, 30 to 50 microinches followed by gold plate, 10 to 20 microinches

008218076000 001

with keying holes 021 = Receptacle 022 = Plug-Card/pin inserted in odd position023 = Plug-Card/pin inserted in even position027 = Plug-Board Contact Code Variation Code 001 = Receptacle002 = Plug-Card005 = Plug-Board with keying pins 011 = Receptacle 012 = Plug-Card/pin inserted in odd position013 = Plug-Card/pin inserted in even position017 = Plug-Board

Variant 002 right angled contacts

000 = 60 8200 16 33P.C. Tail000 =60 8200 16 63P.C. Tail

Variants 001 and 005

722 = 60 8200 16 13Wire Hole Tail736 = 60 8200 16 33P.C. Tail (X = 9/32", Y = 1/4")753 = 60 8200 16 53P.C. Tail (X = 1/8", Y = 3/32")771 = 60 8200 16 63P.C. Tail (X = 31/64", Y = 29/64")

32