Text version of the page 
Varilok
®
Loose Contacts
Varilok
® connectors can be specified as either fully loaded, toinclude the connector body and a variety of pre-loaded contact termination types or the empty body and a selectionof separately specified and ordered contacts. The tablebelow details the various loose contacts available.
Contact StyleDescriptionPlating SpecificationOrder Code
*
Crimp Contact0.25µM Gold All Over (Standard)60 8017 0313 00 339 Loose0.25µM Gold Nose & Tail (Optional)60 8017 0313 00 042Crimp Contact End Carrier0.25µM Gold All Over (Standard)60 8017 0323 99 339(1800 Contacts per reel)0.25µM Gold Nose & Tail (Optional)60 8017 0323 99 0420.25µM Gold All Over (Standard)60 8017 0323 00 339** Ordered separatelyOrdered separatelyIf fitted type 217If fitted type 218If fitted type 750If fitted type 296If fitted type 504 0.25µM Gold Nose & Tail (Optional)60 8017 0323 00 042**Tail Section – 2.49 x 0.61 (0.098 x 0.024)Solder Tag Contact0.25µM Gold All Over (Standard)60 8017 0513 00 339
*
Tail Section – 1.27 x 0.63 (0.025 x 0.005)14.4mm Maxiwrap Contact0.25µM Gold All Over (Standard)60 8017 0613 00 339 Tail Section – 1.27 x 0.63 (0.025 x 0.005)19.3mm Maxiwrap Contact0.25µM Gold All Over (Standard)60 8017 0623 00 339 Tail Section – 0.635 x 0.63 (0.025 x 0.005)14.0 Miniwrap Contact0.25µM Gold All Over (Standard)60 8017 0633 00 339 Tail Section – 0.635 x 0.63 (0.025 x 0.005)4.3mm PC Solder Contact0.25µM Gold All Over (Standard)60 8017 0663 00 339
*
for ø 1.00 mm P.T.H.
* Indicates standard contact** Order code to be used when purchasing through a USA source. Plating code 343 = 0.50 µm Gold all over
CONNECTOR POLARIZATION
Varicon
® 8016 Series connectors are designed with an integralpolarizing system to ensure in high density environments that the
correct halves are mated together.As a factory standard, male plugs are set to the code PG1G1, withthe female receptacles being set to the opposite matching code
RS1S1.Customers who need to change the standard polarization toanother position can do so by using hand tool 06 1989 02 00
0000, or, by ordering the connectors with the required polarization
(eg: PG1G4 or RS2S5, etc) When ordering a different polarization
from normal, the polarization is called out at the end of the partnumber (Ex: 00 8016 056 000 601PG2G4, etc).
ORDERING CODE
P G 1 G 1
Type of Connector Half Location Side(Large Dia.) Positions Location Side(Small Dia.) Positions Plug = PSocket = R 1 through 6 1 through 6 Guide Pin = GGuide Socket = S Guide Pin = GGuide Socket = S
25 25