Automatic Insertion NTC Disc Thermistors

TAPING CHARACTERISTICS

Missing components A maximum of 3 consecutive components may be missingfrom the bandolier, surrounded by at least 6 filled positions. The number of missing components may not exceed 0.5%of the total per packing module.The beginning and the end of tape exhibit 8 or 9 blankpositions. DIMENSIONS:

millimeters (inches)

AMMOPACK REEL

HIL

8 (.315)30 (1.18)InterlayerPaper42 (1.66)Inside48(1.99)Outside 31 (1.22)

LIH 330 (13.0)46 (1.81)290 (11.4)

360 (14.2) hhH P dWEtABW p p

1 1 2

EI H

HP H

W W 1 2

D

Cross sectionDirection of unreeling Marking onthis side Adhesivetape Reference plane

P

A - B ValueToleranceDimensions Characteristics ValueToleranceDimensions Characteristics 18+1 / -0.5WLeading tape width 12.7±0.2P
Sprocket holes pitch254±1–Distance between 21 consecutive holes 6±0.3W
Industrial adhesive tape width 20 pitches 9+0.75 / -0.5W
1 Sprocket hole position3 max.W 0.7±0.2tTotal thickness of tape2.545.08+0.6ELead spacing
2 Distance between the top of the tape and the adhesive -0.15.083.85±0.7P 4±0.2D
Diameter of sprocket hole16/19.5±0.5H
1 Distance between the sprocket hole axis
Distance between the tape axis and the and the lead axis seating plane of the componentH 12.7±1.0PSpacing of components
1 Distance between the tape axis and the topof component body 0.50.6±5%dLead diameter 0±1.3
3 PVerticality of components0±2
3 hAlignment of components

26