| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | Axial Leads/SpinGuard® Extended Range SpinGuards | | |
| | | /aM< | | |
| | | |
| | | |
| | | GENERAL SPECIFICATIONS Capacitance Range 220,000 pF, 330,000 pF, 1,000,000 pF Capacitance Tolerances ±20%, [+80 -20]% Operating Temperature Range Z5U = +10°C to +85°C Temperature Characteristics E = Z5U Voltage Ratings 50 Vdc Dissipation Factor 25°C Z5U = 4.0% max. at 1 KHz, .3 VRMS Insulation Resistance 25°C (MIL-STD-202-Method 302) Z5U = 10 K megohms or 100 megohms - |jF minimum, whichever is less Dielectric Strength Z5U = 200% of rated voltage Moisture Resistance (MIL-STD-202-Method 106) Immersion Cycling (MIL-STD-202-Method 104, condition B) For current reliability information, consult factory. SIZE AND CAPACITANCE SPECIFICATIONS | | |
| | | Dimensions: Millimeters (Inches) | | |
| | | |
| | | 0.445 ±.0127 (.0175" ±.0005") | | |
| | | D Max. | | |
| | | |
| | | |
| | | ELECTRICAL PERFORMANCE CHARACTERISTICS AT TYPICAL 256K DRAM OPERATING CONDITIONS | | |
| | | |
| | | |
| | | | | | | | | | | Parameter | Test Conditions | Mi. Typ. Max. Unit | | | | Inductance, L dv/dt Capacitance, C ESR Impedance (Total) Recovery Time, tR | di/dt = 200 ma/10 ns 20 ns after pulse di/dt = 200 ma/10 ns Resonance Freq., 4-5 MHz 100 MHz (HP- 4192A) | — 80 90 mv — 4.0 4.5 nh — 0.53 — mv/ns .24 .33 — uF — .03 .08 Q — 4.4 5.0 Q —20 — ns | | | | | | | | | | |
| | | Dimensions: Millimeters (Inches) | | |
| | | |
| | | | | | | | | | | AVX Style | SA11* | SA30 | | | | Length | 4.32 | 7.37 | | | | (L) | (.170") | (.290") | | | | Diameter | 3.05 | 3.81 | | | | (D) | (.120") | (.150") | | | | 0.22 mF SA115E224ZAA | | | | | | 0.33 mF **SA115E334ZAA | | | | | | 1.0 mF SA305E105ZAA | | | | | | | | | | | | |
| | | |
| | | |
| | | '• Automatically insertable on 0.300" centers (see page 45 for reel packing details) '■ RAMGuard: the 0.33 |jF value capacitance is recommended for decoupling 256K and 1 Meg Dynamic RAMs. | | |
| | | |
| | | SPECIAL LEAD CONFIGURATIONS | | |
| | | |
| | | Dimensions — Body dimensions Per Standard SpinGuard Configurations. Formed dimensions as shown for types D, E, F, G, H, I, & J configurations. | | |
| | | |
| | | Axial | | |
| | | |
| | | D Single Crimp Formed Dimensions: | | E Dual Crimp | | F No Crimp | | G = .300" L.S. I = .500" L.S. H = .400" L.S. J = .600" L.S. | | |
| | | |
| | | |
| | | |
| | | | | | | | | | | | | | LEAD SPACING* | SEATED HEIGHT (Max.) | | | | | Nom. | D & E | F | G, H, I & J | | | | SA10 | .2" | .525" | .300" | .100" | | | | SA20 | .2" | .570" | .375" | .100" | | | | SA30 | .2" | .580" | .425" | .150" | | | | SA40 | .2" | .650" | .460" | .150" | | | | | | | | | | | | |
| | | |
| | | *Lead spacing can be varied by user to cover .1"-.3" spacing requirements for F, D, and E styles. | | |
| | | |
| | | /aW< | | |
| | | 38 | | |
| | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |