X7R Dielectric “C”

GENERAL SPECIFICATIONS

Insulation Resistance 25°C (MIL-STD-202-Method 302) See Individual Parts Specifications 100 K megohms or 1000 megohms - µF minimum,whichever is less Capacitance Test at 25°C Measured at 1 VRMS max. at 1 KHz Dielectric Strength Capacitance Tolerances 250% of rated Vdc J = ±5%, K = ±10%, M = ±20% Life Test (1,000 hours) Operating Temperature Range 200% rated voltage at +125°C -55°C to +125°C Moisture Resistance (MIL-STD-202-Method 106)Thermal Shock (MIL-STD-202-Method 107, condition A, at rated elevated temperature) Temperature Characteristic ± 15% (0 Vdc) Voltage Ratings -55°C to +125°C 200,100 & 50 Vdc Immersion Cycling (MIL-STD-202-Method 104, condition B)For current reliability information, consult factory. Dissipation Factor 2.5% max. at 1 KHz, 1 VRMS max.

TYPICAL CHARACTERISTICS

Temperature Coefficient
+100-10-20-30-4020406080100D.C. Volts Applied +6 100 Vdc Rated Parts50/63 Rated Parts Capacitance % Capacitance % -75 -50-250+25+50+75+100+125Temperature ° C +120-6-12-18-24 ∆ Capacitance vs. Frequency Voltage Coefficient Insulation Resistance vs. Temp. Capacitance Range
+200-10-201 kHz10 kHz100 kHz1 MHz 10 MHz100 MHzFrequency +10 Capacitance % Insulation Resistance (Ohm-Farads) 101001,00010,000 +25+20+40+60+80+100+150 Temperature ° C

11