TRAFIM Products Custom

PARASITIC INDUCTANCE

Maximum inductance for products (with 2 terminals)

BRACKETS

millimeters (inches)

The capacitor may or may not be equipped with mounting brackets. They are shown on page 25. L x W

millimeters (inches)

Ls (nH) 166 x 152 (6.535 x 5.984)150 (nH) + 0.45 (0.018) x H 340 x 125 (13.386 x 4.921)150 (nH) + 0.30 (0.012) x H

LOW INDUCTANCE OPTION

340 x 152 (13.386 x 5.984)150 (nH) + 0.23 (0.009) x H340 x 165 (13.386 x 6.378)150 (nH) + 0.18 (0.007) x H Please note that the low inductance option will increase width as well as weight: W + 10mm Weight +10% (approximately) This inductance can be reduced by approximately 75nH byusing 4 terminals instead of 2 (see mechanical design chapter). If this solution does not reduce the inductance sufficiently, we suggest taking the low inductance option (down to 40nH). Terminals 4 terminals will be used instead of 2.

TERMINALS AND CONNECTIONS

millimeters (inches)

Epoxide terminals, mechanically assembled by O-ring. 9solutions of terminals are offered, the most standard is type 2. On specific requirements we can propose other solutions depending on the waited function. BodyCreepage distanceAir distance 2 waves52 (2.047)30 (1.181)4 waves78 (3.071)50 (1.969)

123

M12 (0.472) ø60 (2.362) 30 (1.181) M12 (0.472) ø60 (2.362)23 (0.906) ± 1 (0.039)40 (1.575) ± 1 (0.039) ± 1 (0.039)23 (0.906) ± 1 (0.039) ± 1 (0.039)30 (1.181) ± 1 (0.039)M16 (0.630) ø60 (2.362)23 (0.906)

456

± 0.5 (0.020)32 (1.260) ± 1 (0.039)ø13 (0.512) ± 0.5 (0.020) ± 1 (0.039)M16 (0.630) ± 1 (0.039) 32 (1.260) ± 1 (0.039) ± 1 (0.039)30 (1.181) ± 1 (0.039) ø13 (0.512) ± 1 (0.039) 33 (1.299) ø60 (2.362)40 (1.575) ø60 (2.362)23 (0.906) ø60 (2.362)40 (1.575)

789

± 1 (0.039)41 (1.614) ± 1 (0.039)41 (1.614) ± 1 (0.039)40 (1.575)

M8 (0.315)17.0 (0.669)ø60 (2.362)23 (0.906)

± 1 (0.039)23 (0.906) ± 1 (0.039) ø10.2 (0.402)-0 +0.5 (0.020) ± 1 (0.039) ø10.2 (0.402)-0 +0.5 (0.020)

± 1 (0.039)

ø60 (2.362) 12 (0.472) ø60 (2.362) 12 (0.472)

24