| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | | | |
| | | |
| | | (SM Style) SM Military Styles DSCC Dwg. #87106 & #88011 | | U.S. Preferred Styles | | |
| | | | | |
| | | |
| | | Ordering Information | | |
| | | Insulation Resistance. At +25°C, rated voltage: 100K MQ or 1,000 MQ-uF, whichever is less. At +125°C, rated voltage: 10K MQ or 100 MQ-uF, whichever is less. | | |
| | | |
| | | Part Number: The complete part number shall be as follows: X7R: 87106 XXX | | |
| | | |
| | | |
| | | Drawing number | | Dash number
| |
| | | |
| | | |
| | | Dielectric Withstanding Voltage. Dielectric withstanding voltage shall be 250 percent of rated voltage except 500V rated parts at 150 percent of rated voltage. | | |
| | | (see list) Ordering Data. The contract or purchase order should specify the following: a. Complete part number. b. Requirements for delivery of one copy of the quality conformance inspection data with each shipment of parts by the manufacturer. c. Whether the manufacturer performs the group B tests, or provides certification of compliance with group B requirements. d. Requirements for notification of change of products to acquiring activity, if applicable. e. Requirements for packaging and packing. | | |
| | | |
| | | Capacitance Tolerance. J = ±5 percent, K = ±10 percent, M = ±20 percent. | | |
| | | |
| | | Solderability of Terminals. In accordance with MIL-PRF-49470. | | |
| | | |
| | | Resistance to Soldering Heat. In accordance with MIL-STD-202, method 210, condition B, for 20 seconds. | | |
| | | |
| | | |
| | | Shock. In accordance with MIL-PRF-49470. | | |
| | | Source of Supply. Vendor CAGE number | | |
| | | |
| | | Vendor name and address | | |
| | | |
| | | Immersion Cycling. In accordance with MIL-PRF-49470. | | |
| | | Olean Advanced Products A Division of AVX Corporation 1695 Seneca Avenue Olean, NY 14760 | | |
| | | 96095 | | |
| | | |
| | | |
| | | Moisture Resistance. In accordance with MIL-PRF-49470. | | |
| | | |
| | | |
| | | Performance Characteristics Operating Temperature Range. The operating temperature range shall be -55°C to +125°C. Electrical Characteristics. Rated Voltage. See tables on pages 22, 23, 24 & 25. Capacitance. Measured in accordance with method 305 of MIL-STD-202 (1KHz at 1.0Vrms, open circuit voltage, at +25°C). Dissipation Factor (+25°C). X7R: Dissipation factor shall be 2.5 percent maximum (measured under the same conditions as capacitance.) C0G: Dissipation factor shall be 0.15 percent maximum. Temperature Coefficient. DSCC Dwg. Bias = 0 volt Bias = rated voltage 88011 All Voltages 0±30 ppm/°C 0±30 ppm/°C 87106 50 WVDC ±15% +15, -25% and 100 WVDC 87106 200 WVDC ±15% +15, -40% 87106 500 WVDC ±15% +15, -50% | | |
| | | Life. Life shall be 200 percent of rated voltage except 500V rated parts at 120 percent of rated voltage applied at +125°C for 1,000 hours. | | |
| | | |
| | | Thermal Shock. MIL-STD-202, method 107, test condition A, except high temperature is +125°C. | | |
| | | |
| | | Voltage Conditioning. In accordance with MIL-PRF-49470, except 500V rated parts at 120 percent of rated voltage at +125°C. | | |
| | | |
| | | Terminal Strength. MIL-STD-202, method 211, condition B, except that each lead shall be bent away from the body 90 degrees from the original position and back, two bends. | | |
| | | |
| | | Marking. Marking shall be in accordance with MIL-STD-1285, except the part number shall be as specified in paragraph 1.2 of 87106, or 88011 with the manufacturer's name or code and date code minimum, except case sizes 4 and 5 shall be marked with coded cap and tolerance minimum. Full marking shall be included on the package. | | |
| | | |
| | | |
| | | /aW< | | |
| | | 20 | | |
| | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |