cad

Ion Bar High Speed Ionizer and High Precision
6Pages

{{requestButtons}}

Catalog excerpts

Ion Bar High Speed Ionizer and High Precision - 1

Clean & Compact Newly designed high-precision and high-speed ionizer applying a new technology NEW Long Versions now available AUTOMAX S.A. - Z.A. - Rue de Champ Chardon 41250 MONT PRES CHAMBORD - FRANCE E-mail: info@automax.fr www.automax.fr C series Ion Bar AC Pulse Ionizing Clean Bar

Open the catalog to page 1
Ion Bar High Speed Ionizer and High Precision - 2

Power input / output Interface terminal Air intake port PT-1 / 8 ・One side for C-90 ・Both left and right sides for the C-100 and larger Super Compact Design Super Fast Static Electricity Removal Super-compact design having high-voltage power supply, control circuit and air circuit inside. (Actual size shown on right) Generating alternately positive ions and negative ions from each electrode. Since ions are generated at the maximum width of each positive and negative electrode cycle, the ion volume is high and static electricity can be removed quickly. Typical alternating current Terminals...

Open the catalog to page 2
Ion Bar High Speed Ionizer and High Precision - 3

DIP switch Display Infrared sensor Setting buttons CLEAN Clean Design Needle cleaning timer The timer notifies when to clean needle electrodes. The cleaning timing can be set in one-day units from 1 to 60 da ys. When the time elapses, the needle cleaning lamp turns ON and "AL-2" appears on the display. Preventing body contamination The opposite electrodes are incorporated in the body. This design enables to prevent particles from adhering to the outside of the body due to the induced voltage and to improve the ion generation efficiency by minimizing applied voltage losses. High Voltage...

Open the catalog to page 3
Ion Bar High Speed Ionizer and High Precision - 4

Various Settings Voltage Level The applied voltage can be changed individually for the positive and negative side. The amount of ions can be changed by di erent output steps. (Ten steps: 8.0 to 12.5 kVp-p) Film manufacturing Close distance: 50 to 300mm Clean room bench Clean room ceiling Voltage level Pulse Ratio Card-type Remote Controller The ion balance can be adjusted by changing the pulse ratio. This card-type remote controller is thin enough to t in your pocket. The C series can be controlled from a distant location. Address When using multiple units, an address allocation (1 to 16)...

Open the catalog to page 4
Ion Bar High Speed Ionizer and High Precision - 5

Measurement conditions •Product : C-150 • Voltage : 10.5kV(P-06 N-06) • Air pressure : 0.3MPa • Temperature : 24°c ±1°c - Humidity : 40%±2%RH • Decay time : ±1000V-> ±100V • CPM : 20pF±2pF (150x150mm) • Frequency :5Hz • Frequency :8Hz • Frequency :10Hz ^ Ionizing method Pulse AC Corona discharge Input power supply 24 VDC ± 5 % (connector RJ45) / 600mA Max. Power consumption max 14.4W Air supply hose diameter PT 1 / 8, Hose 08 mm ODX06 mm ID Air supply Clean dry air or nitrogen (N2) (0.3 MPa or less) Setting functions Applied voltage : AC8~12.5 kV(pp) Each polarity can be set...

Open the catalog to page 5
Ion Bar High Speed Ionizer and High Precision - 6

Clean room ceiling Automobile component painting line Glass substrate transfer Dimension / Electrode needles / Middle Blacket Model.No A (mm) B (mm) C (mm) D (mm) Example of power connection Middle Blacket Dimensions and descriptions can be changed in a preoccupation with an improvement of the performances, these dimensions can be modified without notice of our share • For safety purposes, read the instruction manual carefully before using the unit. *Do not use this product in an explosion-proof area. •A high voltage is applied on this product. Make sure that water, oil,...

Open the catalog to page 6

All AUTOMAX catalogs and technical brochures

  1. Vacuum Filter

    12 Pages

  2. Vacuum Valve

    28 Pages

  3. Flow sensor

    36 Pages