Laboratory Reactors - AUTOCLAVE ENGINEERS - #2

Text version of the page

1000 ml Bolted Closure Stirred Reactors Technical Specifications Autoclave Engineers provides a variety of optional accessories to custom configure each reactor. See the Bolted Closure Stirred Reactor Ordering Guide to configure a reactor for a specific application. Seal Materials: Metal Gasket (vessel material), Buna-N, Ethylene-Propylene, PTFE, Viton®, Silicone, or Kalrez® O-rings. Approvals: Optional ASME code stamp, Canadian Registration or CE Mark. Stand: Tall Bench Top or Floor Stand Body Lift: None or Manual Jack. Agitator: 3300 RPM rated MagneDrive® MAG075-01 Series with 7 in•lb (0.79 N•m) static torque, carbon/graphite bearings, or 3300 RPM rated MagneDrive® MAG075-02 Series with 16 in•lb (1.8 N•m) static torque, carbon/graphite bearings. Motors: 1/2 HP (0.37 kW) General Purpose DC with either: 90 V Armature (120 V unit), or 180 V Armature (240 V unit) CE Mark. 1/2 HP (0.37 kW) Explosion-Proof DC with either: 90 V Armature (120 V unit), or 180 V Armature (240 V unit). Air Motor with manual or electronic speed adjustment. (Supply with 35 SCFM of 40 psi compressed air minimum) 1/2 HP (0.37 kW) Explosion-proof AC for 230 - 400 VAC 3 phase, 50 Hz, Inverter duty (variable frequency) CE Mark. Impeller Styles: AE Dispersimax, Straight Turbine, Axial Flow-Up, or Axial Flow-Down; All 1.25 inch (31.8 mm) diameter. Baffle: Two (2) blade spring loaded baffle bar (removable). Speed Sensor: Magnetic Sensor General Purpose, or Intrinsically-Safe Magnetic Sensor (Barrier Required) Heating: Furnaces: 120 VAC, Single Phase or 240 VAC, Single Phase; 1,700 Watt Jacket: Removable, Spiral Baffle with O-Ring Seals. Internal Accessories Available: External Accessories Available: Liquid sample tube w or w/o valve (1/8” O.D. tube) Vent Valve (1/8” O.D. tube) Blow pipe w or w/o valve (1/8” O.D. tube) 2.5” (63.5mm) Dial Pressure Gauge - (Multiple ranges available) Sparge tube w or w/o valve (1/8” O.D. tube) Pressure transducers - range dependent on gauge Cooling coil w or w/o valve (1/8” O.D. tube) Inlet valves, (1/8” O.D. tube) either one or two on a shared connection Process Thermocouple, Type J or K Catalyst charging valve 3/8” O.D. tube, 1/4” full bore opening External thermocouple type J or K 1/2” Centered bottom port with manual valve, flush bottom design (requires floor stand) Bottom port 3/16” (centered AE F-437-FB connection) 06-0018PE-0301 Bulletin SR -BC-1L ! WARNING ! FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND/OR PROPERTY DAMAGE. This document and other information from Snap-tite, Inc., its subsidiaries and authorized distributors, provides product and/or system options for further investigation by users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current product catalog. Due to the variety of operation conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Snap-tite, Inc. and its subsidiaries at any time without notice. ISO-9001 Certified 2930 West 22nd Street Erie, Pennsylvania 16506-2302 USA PH: 814-838-5700 FAX: 814-838-5855 e-mail: aeclave_sales@snap-tite.com www.autoclaveengineers.com Supporting Information Please refer to the following sections of the catalog for complimentary products and additional technical details. If your catalog is incomplete or out-of-date, feel free to register your name and download literature from Autoclave Engineers website. A good starting point is http://www.snap-tite.com/divisions/ae/aed-index.html to reach the main page of Autoclave Engineers reactor products. • “Bolted Closure Stirred Reactor Ordering Guide” - Provides a step-by-step guide on how to configure the Bolted Closure Reactor to a specific application. • “Instrumentation” - Details Autoclave Engineers’ full line of control options for temperature, pressure, and speed. • “Agitation” - Provides additional specifications on the MagneDrive® magnetic agitator and available impeller systems. • “Pressure Vessels” - Provides details on the Bolted Closure vessel assembly. • “Stirred Reactor Selection Guide” - Provides general information on all of Autoclave Engineers’ stirred reactors The following Engineering drawings are available upon request from Autoclave Engineers for more detailed technical information. Drawing Number 40A-8362 Bench Top/Light Floor Motor Options (Air and DC motors) Drawing Number 30B-0792 Belt Drive Assembly (AC motor) Drawing Number 30A-9638 Manual Screw Jack Assembly Viton® and Kalrez® are registered trademarks of DuPont Dow Elastomers, Wilmington DE HASTELLOY® is a registered trademark of Haynes International Inc. Kokomo IN Note: Autoclave Engineers, division of Snap-tite, Inc. reserves the right to substitute an equivalent material for trademarked material. Autoclave Engineers purchases substitute materials based on specification conformance, typically a widely accepted specification created by an industry standards organization. Drawing Number Tabulated by Material of Construction Drawing Title 316 Stainless Steel HASTELLOY® C-276 40A-8545 40A-8684 Bench Top Bolted Closure General Arrangement 40A-8134 40A-8685 Light Duty Floor Stand Bolted Closure General Arrangement 40A-8533 40A-8621 1000 ml Bolted Closure Reactor 30A-9605 30B-0382 MAG 075 MagneDrive® Assembly 30A-9640 30B-0479 1/8” Valve Rack