DYNAMIC DEPLIANT ENG 3 - Autec - #1

Text version of the page

Technical data solutions for DYNAMIC IVIobil© HydrâuIics ^^^^^ S) autec Vr safety remote control Safety General Frequency band 863-870 MHz (256 channels) / 915 MHz (260 channels) / 447 MHz (32 channels) Hamming distance > 15 Typical operating range 100 m Safety category for the Stop protection (EN ISO 13849-1 / EN IEC 62061) PL e, cat. 4 / SIL 3 Safety category for the protection against unintended movements of the actuators from their resting position (EN ISO 13849-1 / EN IEC 62061) PL d, cat. 3 / SIL 2 Radio communication bidirectional, with automatic and dynamic selection of a free channel Typical response time for Stop command and commands < 80 ms Protection degree IP65 CAN interface CAN/CANopen Transmitting Unit Power supply (NiMH) 7.2 Vdc Autonomy with fully charged battery (continuous use at 20°C) 11 hours Autonomy with fully charged battery (continuous use at 20°C) - Data Feedback 9.5 hours Operating and storage temperature (-25°C)-(+55°C) / (-40°C)-(+85°C) Low battery warning time 3.5 minutes CRS receiving unit Power supply 8-30 Vdc Operating and storage temperature (-25°C)-(+70°C) / (-40°C)-(+85°C) Number of functions max. 12 analogue; max. 64 on/off ARS receiving unit Power supply 8-30 Vdc Operating and storage temperature (-25°C)-(+70°C) / (-40°C)-(+85°C) Number of functions max. 6 analogue; max. 32 on/off ARM receiving unit Power supply 8-30 Vdc Operating and storage temperature (-25°C)-(+70°C) / (-40°C)-(+85°C) Number of functions max. 12 analogue; max. 64 on/off Products comply with the R&TTE Directive (99/05/EC), the LVD Directive (2006/95/EC) and the Machinery Directive (2006/42/EC), as applicable Ci DIMENSIONS WEIGHT I 153x148x55 mm I ~ 500 g DIMENSIONS WEIGHT 194x210x61 mm ~ 850 g DIMENSIONS WEIGHT 202x230x96 mm ~ 2 kg CRS receiving unit ARS receiving unit ARM receiving unit CRS receiving unit: DC power supply. Optimised for integration in a CAN/CANopen network. Provides a maximum of 12 analogue and 64 on/off functions. ARS receiving unit: DC power supply. Analogue outputs are managed through a voltage/current-driven mother board; communication via CAN/CANopen interface is also available. Provides a maximum of 6 analogue and 32 on/off functions. Digital and serial inputs are available. ARM receiving unit: DC power supply. Analogue outputs are managed through a voltage- or current-driven mother board; communi­cation via CAN/CANopen interface is also available. Provides a maximum of 12 analogue and 64 on/off functions. Digital, analogue and serial inputs are available. 32- or 72-pole output plug. Safety functions of all receiving units are available on redundant solid-state outputs and through CAN messages. Autec remote control systems keep your people safe in challenging environments S) autec safety remote control z LU Via Pomaroli, 65 - 36030 Caldogno (VI) - ITALY Cert. UNI EN ISO 9001:2000 No. 50 100 2877 - Rev. 01 Phone +39.0444.901000 - Fax +39.0444.901011 Design, manufacture and service of remote control info@autecsafety.com - www.autecsafety.com systems for safety industrial application AUTEC is committed to continuous products improvement, therefore reserves the right to change the contents of this brochure without notice. All rights reserved.