See other catalogues for
Auralex Acoustics
You may also be interested in
Text version of the page
www.golterman.com
Ceiling Mounting
Banners with Stiffeners
Application
For mounting Banners to ceilings or any
structural support.
Description
This installation technique is used for mounting
acoustical Banners using stiffeners. Installation
is done in the following manner:
1. Confirm that each Banner has two stiffeners at
each end.
2. Select appropriate fasteners (not provided by
Golterman and Sabo) to attach the Banner to
the ceiling.
3. Locate appropriate starting point and fasten one
end of the Banner through the stiffener. If the
Banner is 120” or less, pull the Banner to the
required drop and fasten the other end through
the stiffener. If the Banner is longer than 120”,
use a single, intermediate stiffener at the
mid-point of the Banner by fastening through
the intermediate stiffener.
4. Use at least two fasteners at each stiffener. For
Banners wider than 24”, use three fasteners.
Mounting Detail
Stiffeners are attached at both ends.
An intermediate stiffener is attached at
the mid-point of Banners longer than
120”. Intermediate stiffeners are shipped
loose and attached in the field.
Banner
Fastener by Others
End Stiffeners
Intermediate Stiffeners
Banner
Banner
Fastener
by Others
Stiffeners
Stiffener
Total Sound Control® | www.auralex.com | 800-959-3343 | info@auralex.com
Auralex Acoustics) to attach a Banner to
