Electric part-turn actuators - AUMA - #32

Text version of the page

Particular conditions - Local adaptations possible! One of the many advantages of a modular design is the ease at which site upgrade can be achieved. Wall bracket If the actuator is difficult to access or in case of extreme vibration or high ambient temperatures at the place of valve installation, controls with operating elements can be mounted separately from the actuator on a wall bracket. The cable length between actuator and controls may be up to 100 m. Wall bracket retrofitting is possible at any later date. 32 | Customisation of device positioning The optimum positioning is easily adjustable thus avoiding that the display is upside down, inaccessible operating elements, awkward cable gland alignments, etc. The correct position can easily be chosen. The following positioning adjustments at 90° increments are possible: controls to actuator, local controls to controls as well as the electrical plug/socket connector. The plug/socket connections allow easy on-site adjustment of the mounting position.