Electric multi-turn actuators - AUMA - #51

/ 56


catalogue search
P. 51
P. 52
P. 53
P. 54
P. 55
P. 56


See other catalogues for AUMA
You may also be interested in

PAC, Multi-turn actuator, Electric actuator, Actuator, Controller


Text version of the page
DCS integrations – Selection With a number of well-known DCS manufacturers, the integration tests with AUMA actuators were successfully completed. This ensures that AUMA actuators can be integrated in these DCS without any problems. Fieldbus Profibus DP Foundation Fieldbus Modbus EU Directives Declaration of Incorporation in compliance with the Machinery Directive and Declaration of Conformity according to the Low Voltage and EMC Directives According to the Machinery Directive, AUMA actuators and actuator controls are considered as partly completed machinery. This means that a Declaration of Conformity in accordance with this Directive will not be issued by AUMA. AUMA’s Declaration of Incorporation confirms that during the design stage of the devices, the fundamental safety requirements stipulated in the Machinery Directive were applied. DCS Siemens (PCS 7, SPPA T3000, SPPA T2000, Open PMC, etc..) ABB Mitsubishi Yokogawa (CS 3000) Metso Emerson (DeltaV and Ovation) Foxboro/Invensys Allan Bradley ABB (800 XA) Honeywell (Experion PKS) Yokogawa (CS 3000) Emerson (Delta V) Honeywell (TDC 3000) Final inspection record After assembly, all actuators are thoroughly tested according to AUMA’s inspection specification and the torque switches are calibrated. The procedure is recorded on the final inspection record. Certificates Notified bodies perform type tests on the instruments to determine whether the devices are suitable for specially defined applications. One example are the tests to prove electrical safety for the North American market. If a device has passed the test, this is recorded in a certificate. For all devices mentioned in this brochure, the relevant certificates can be provided. AUMA actuators fulfil the requirements of the Low Voltage and EMC Directives. This has been proved in extensive tests. Therefore, AUMA issues a Declaration of Conformity. All certificates and records are provided by AUMA on request either as a hard or digital copy. The declarations of incorporation and conformity form a joint certificate, also integrated within the operation instructions. The documents can be downloaded from the AUMA website at any time; some of them are password protected. According to the Low Voltage and EMC directives, the devices are labelled with the CE mark. ā–  Where can I get the certificates? www.auma.com | 51

pageCatalog pdf di En 2012-05-21-27