Modular Mechanics
188Pages

{{requestButtons}}

Catalog excerpts

Modular Mechanics - 1

• SUBRACKS AND SYSTEMS • PLUG-IN DRAWERS • BLANKING PANELS • BOARD-HOLDER • PLUG-IN UNITS • DRAWERS, CASSETTES, MODULES • ACCESSORIES

Open the catalog to page 1
Modular Mechanics - 2

Experience designs, develops and manufactures in France, at its factories at Glos (Normandy) and Carros (Côte d'Azur), casing equipment for the electronics industry: cabinets, cases, racks, systems, fine sheet metal equipment, etc. ATOS has been advancing for more than forty years to provide an indoor or outdoor casing solution for every need of the electronics industry: standard, adapted standard, specific or produced from drawings. Resolutely focused on its customers, ATOS serves the Telecommunications, Transport (aerospace, rail, aviation, maritime, etc.), Electronics and IT...

Open the catalog to page 2
Modular Mechanics - 3

Know-how and Development has added to its original sheet metal and modular mechanical activities by developing services to offer its customers A RANGE OF EXPERTISE IN LINE WITH THE ELECTRONICS MARKETS: CHANGES AND TECHNOLOGICAL WATCH Market demands and technical support for each specific file serve to outreach a range of products and services which are increasingly relevant for all the customers. ATOS has added to its original sheet metal and modular mechanical activities by developing services to offer its customers a whole range of expertise in line with the electronics markets: T a wo...

Open the catalog to page 3
Modular Mechanics - 4

Your contacts A sales and marketing team focused on your needs. Patrick Desbissons Fixe : 0033 (0)2 31 48 31 27

Open the catalog to page 4
Modular Mechanics - 5

Our Markets MODULAR MECHANICS MODULAR MECHANICS NETWORKS AND TELECOMS MODULAR MECHANICS DATACENTER MODULAR MECHANICS INDUSTRY AND ELECTRONICS MODULAR MECHANICS DEFENCE MODULAR MECHANICS SUBCONTRACTING MODULAR MECHANICS Please contact the sales and marketing team or go to www.atos-racks.com for a catalogue

Open the catalog to page 5
Modular Mechanics - 6

Modular mechanics SUBRACKS, SYSTEMS, PLUG-IN DRAWERS, BLANKING PANELS 3U/6U board holder with fixed handle fabric gasket. 62-63 3U/6U board holder with fixed handle metal gasket..64-65 3U/6U board holder with TTAL handle fabric gasket...66-67 3U/6U board holder with TTAL handle metal gasket.. 68-69

Open the catalog to page 6
Modular Mechanics - 7

BOARD HOLDER, PLUG-IN UNITS, DRAWERS, CASSETTES, ACCESSORIES

Open the catalog to page 7
Modular Mechanics - 9

CHANGES IN THE ATOS “CUBIC“ RANGE

Open the catalog to page 9
Modular Mechanics - 10

STANDARD CHANGES IN THE ATOS “CUBIC“ RANGE 3U SUBRACK 84TE Description: • Universal subrack for bus or DIN 41612 connectors, • Simple design, • Extensive modular design allowing multiple configurations, • Robustness (end shields 2,5 mm thick, profiled brackets and rails), • Offset spacers (3 mm) must be added to mount the bus (see page 19), • Connector holders must be added to mount DIN 41612 connectors (see page 19), Compliant with standards EUROPE single format = H,100 mm Composition: Item Qty, Description Material Treatment 3 2 Side end shield Alu, 2,5 mm thick Conductive...

Open the catalog to page 10
Modular Mechanics - 11

STANDARD CHANGES IN THE ATOS “CUBIC“ RANGE Description: • Universal subrack for bus or DIN 41612 connectors, • Simple design, • Extensive modular design allowing multiple conlig-urations, • Robustness (end shields 2,5 mm thick, profiled brackets and rails), • Offset spacers (3 mm) must be added to mount the bus (see page 19), • Connector holders must be added to mount DIN 41612 connectors (see page 19), Compliances: Compliant with standards EUROPE double format = H,233,35 mm Dimensions:53at^0Ea30IgolD^LmtiK3 Tapped strips not illustrated Composition: Item Qty...

Open the catalog to page 11
Modular Mechanics - 12

Subracks STANDARD CHANGES IN THE ATOS “CUBIC“ RANGE 1 4 FRONT horizontal rail Alu. profile Colourless anodisation” 2 4 REAR horizontal rail Alu. profile Colourless anodisation” 3 2 Side end shield Alu. 2.5 mm thick Conductive passivation* 4 2 Front bracket Alu. profile Colourless anodisation” 1 Set of fasteners Steel White zinc-plating 6U 2 x 3U SUBRACK 84TE Description: Universal subrack for bus or DIN 41612 connectors, made up of two 3U areas. • Simple design. • Extensive modular design allowing multiple configurations. • Robustness (end...

Open the catalog to page 12
Modular Mechanics - 13

Subracks STANDARD CHANGES IN THE ATOS “CUBIC“ RANGE 6U + 2 x 3U SUBRACK MIXED SUBRACK Description: Universal subrack for bus or DIN 41612 connectors, made up of one 6U area and two 3U areas. • Simple design. • Extensive modular design allowing multiple configurations. • Robustness (end shields 2.5 mm thick, profiled brackets and rails). • Offset spacers (3 mm) must be added to mount the bus (see page 19). • Connector holders must be added to mount DIN 41612 connectors (see page 19). • 82 TE usable (one 2TE area is used for the subdivision). Compliances: Compliant with standards EUROPE...

Open the catalog to page 13
Modular Mechanics - 14

Subracks STANDARD CHANGES IN THE ATOS “CUBIC“ RANGE MIXED DIVISION KIT 6U + 2 x 3U REVERSIBLE Description: Kit for universal subrack: for bus or DIN connectors, Is mounted in all 6U subracks 84TE, The plug-in depth is defined by the choice of the subrack on page 11, The kit can be mounted on right or left (6U/3U values below), 2 TE usable (the 2TE area is used for the subdivision), Delivered in kit form or mounted at the order with the subrack, Compliances: Compliant with standards EUROPE single format = H,100 mm EUROPE double format = H,233,35 mm Composition: Item Qty,...

Open the catalog to page 14
Modular Mechanics - 15

STANDARD CHANGES IN THE ATOS “CUBIC“ RANGE SUBDIVISION AND OFFSET KIT IN MIXED 3U/6U DEPTH FOR CI 160 AND 220 Description: Starting with a 6U subrack 84TE, this kit makes it possible to insert boards of different depths: - 6U: CI 160 and 220 - 3U: CI 160 and 220 Use the 3-component board holder only for the CI 220 (see page 17). The offset is created at the rear according to the rail position. Delivered in kit form or mounted at the order with the subrack. NB: identical subdivision configurations to the 6U + 2 x 3U mixed division kit on page 13. Part nos. for products in kit form: Quantity...

Open the catalog to page 15
Modular Mechanics - 16

STANDARD CHANGES IN THE ATOS “CUBIC“ RANGE 3U SUBRACK 84TE DEPTH 50 Description: Designed to accommodate modular front panels, customised mounting is possible with multiple combinations of IT connectors and couplings. Description In kit form Mounted 1 2 FRONT horizontal rail Alu. profile Colourless anodisation° 3 2 Side end shield Alu. 2.5 mm thick Cond. passivation12 4 2 Front bracket Alu. profile Colourless anodisation” 1 Set of fasteners (with- Steel White zinc-plating 3U SUBRACK 84TE DEPTH 115 EQUIPPED WITH DIN RAIL 42TE Description: 3U subrack 84 TE...

Open the catalog to page 16

All ATOS SAS catalogs and technical brochures

  1. Outdoor

    6 Pages

  2. Optimal

    56 Pages

  3. Defence

    24 Pages

  4. Datacenter

    67 Pages