Xenotest 150S+ Brochure - Atlas Material Testing Technology - #1

Text version of the page

Utility Requirements Electrical 230 V ±10 %, 50/60 Hz (1P,N,PE) AC or (2P,PE) AC | CEE (32 A, 3-pin 6h) Amperage 16 A Maximum power consumption approx. 5 kVA Cooling air requirement for xenon lamp 200 m3/h Cooling air requirement for test chamber 100 m3/h Water consumption for spray system 0.7 l/min Water consumption for humidity max. 0.033 l/min Sample Capacity Sample holders 11* Sample dimensions L x W (max.) 135 x 45 mm Exposure area 1320 cm2 *without additional sensor (22 samples during turning mode) Physical Specifications Width x Depth x Height 900 x 780 x 1800 mm Weight approx. 280 kg Atlas Material Testing Technology GmbH (p) +49.60 51.707.140 (f) +49.60 51.707.149 Atlas Material Testing Technology LLC (p) +1.773.327.4520 (f) +1.773.327.5787 www.atlas-mts.com We reserve the right to make technical changes to the instruments and systems. ©2006 Atlas Material Testing Technology GmbH All rights reserved. Printed in Germany. BV Pub. No. 56352320 US Pub. No. 2026 Xenotest© 150 S+ Features Air-cooled xenon lamp providing a maximum of 2.2 KW 1 Measurement and control of test chamber temperature 1 Measurement and control of test chamber humidity 1 Air volume control to influence the temperature difference between test chamber and Black Standard Temperature 1 Test chamber heating device 1 Ultrasonic humidification system 1 Specimen spray system 1 Integrated water reservoir 1 Turning and non-turning mode operation 1 Parameter check 1 User guided operation by color graphic display 1 Touch screen and I/O board using optical fiber waveguide technology 1 Data output via memory card or RS232 / USB interface 1 Instrument-internal memory chip to store instrument data 1 Thermoprinter 1 XenoCal BST Black Standard Thermometer 1 XenoCal WST White Standard Thermometer 1 XenoCal BB 300-400 irradiance sensor 1 XenoCal WB 300-800 irradiance sensor 1 XenoCal NB 340 irradiance sensor 1 1Standard 1Optional Xenotest© 150 S+ Specifications Lamp power is adjustable between 65 and 100% Filter Systems Absorption filter lantern with 6 IR +1 UV + Suprax cylinder Absorption filter lantern with 7 IR +Suprax cylinder Temperature and Humidity Ranges Test chamber temperature: 30° C to 70° C* Black Standard Temperature: 40° C to 130° C* Relative humidity: 10 to 95% relative humdity* *Depending on the selected filter combination and irradiance as well as the ambient laboratory condition Experience. The Atlas Difference. Light Exposure and Weathering Testing Instrument XENOTEST® 150 S+ XenoCal Irradiance Sensor to measure irradiance and radiant exposure from 300 to 400 nm. Analysis and graphic display of the measured values of both sensors via an IBM-compatible PC in conjunction with the XenoSoft software program XenoCal BST to measure the Black Standard Temperature at sample level XenoCal WST to measure the White Standard Temperature at sample level Thermoprinter for printout of protocols regarding instrument and program data as well as test parameters at pre-selectable intervals Regular Specimen Holder for samples up to a thickness of 3 mm Special Specimen Holder for samples up to a thickness of 15 mm such as automotive upholstery materials Accessory Kit “Textile” The ideal standard accessories configuration for textile testing Options & Accessories Specimen Holders Description Application Maximum Size Exposure Size Rack Capacity Regular Specimen Holder Textiles, plastics, coatings, papers 135 x 45 mm 121 x 35 mm 11 for samples up to 3 mm thick Special Specimen Holder Carpets, plastics, foam-backed materials, 135 x 45 mm 121 x 35 mm 11 for samples up to 15 mm thick thick panels Specimen Holder Blue scale fabric during weathering tests 135 x 45 mm 1 for Blue Scale