NOW Catalog - Atlas Material Testing Technology - #28

/ 68


catalogue search
P. 01
P. 02
P. 03
P. 04
P. 05
P. 06
P. 07
P. 08
P. 09
P. 10
P. 11
P. 12
P. 13
P. 14
P. 15
P. 16
P. 17
P. 18
P. 19
P. 20
P. 21
P. 22
P. 23
P. 24
P. 25
P. 26
P. 27
P. 28
P. 29
P. 30
P. 31
P. 32
P. 33
P. 34
P. 35
P. 36
P. 37
P. 38
P. 39
P. 40
P. 41
P. 42
P. 43
P. 44
P. 45
P. 46
P. 47
P. 48
P. 49
P. 50


See other catalogues for Atlas Material Testing Technology

Text version of the page

Accelerated Weathering Products

NOW Catalog - 27780 Solar Simulation Chambers

Simulating Indoor and Outdoor Conditions for Whole Components and Finished Products

The SC series is equipped with either MH (Metal Halide) or MHG (Metal Halide Global) lamps to achieve an accelerated simulation of indoor and outdoor weathering. The MHG lamp has the ability to vary output across a specific range and does not exhibit the energy peaks at certain wavelengths, which are found in the MH spectrum. These peaks can produce widely differing results in samples with corresponding spectral sensitivity. MH units are therefore preferred for heat load tests. All SC units are suitable for laboratory testing using simulated sunlight and the MHG models are the best solution for aging tests. The SC340, SC600, SC1000 and the SC2000 can be used as full-function climate chambers.

SolarClimatic Features and Benefits

® Spacious test chamber design offers four test capacities allowing testing of components with large surface areas (for example airbags) or even complete large components (for example instrument panels, bumpers, side panels, etc.)
® Influencing parameters such as global irradiation, temperature, and humidity can be individually programmed
® Easily accessible communications and control units guarantee ease of use for the operator
® High performance program functions allow the design of very flexible test specifications to match the customer’s individual testing needs

Standards

The SC series meets or exceeds the following industry standards: BMW PrV 306 DIN 75 220

SC2000

IEC 68-2-5
Features a 3400 liter test chamber capacity. ISO 9022-9 12097-2 MIL STD 810 G (Method 505.5) VW PV 1211

SC600

This is a sample of global standards that can be met by this instrument. For moreinformation on additional or specific standards, contact your local Atlas representative. Standards are subject to change without notice. This might lead to the inclusion or exclusion of certain instruments. Features a 600 liter test chamber capacity.
27
Phone: +1.773.327.4520 www.atlas-mts.com

pageCatalog pdf di En 2012-02-07-16