Text version of the page

Temperature wire wound

Thin film elements Type MR - 13136 Ceramic resistanceelementsType MR :

(potted in ceramic)

This resistanceelement is ideal formedical, chemicalindustries andwhite goods

APPLICATIONS - High vibration environment- Application requiring high temperature or thermal shock stability- Production of temperature sensors SPECIAL FEATURES - Easy installation (good dimension tolerances) DESIGN Thin-film resistance element (type M) sealed with cement in a ceramic body.Two separate resistive elements can be sealed in a single tube. NOMINAL VALUE - 100, 500 and 1000 at 0°C- Temperature coefficient = 3850 ppm/K TOLERANCE CLASS - B according to DIN IEC 751- Closer tolerances in restricted temperature ranges TEMPERATURE RANGE - From -70°C to +500°C, peaks at 550°C CONNECTION WIRES - Platinum coated nickel wires HOUSING ADVISE - Use without protection in dry environment only RESISTANCE AND STABILITY - Slight hysteresis is possible during thermal shocks - High resistance to vibrations and thermal shocks - Insensitive to uniformly exerted pressures ; can break if violent shocks OPTIONS - Closer tolerances- Various connection lengths- Extension by various cable types- Various diameters 48, rue de Frégy - BP 50F – 77610 Fontenay - TrésignyTél. : + 33 (0)1 64 42 52 52Fax. : + 33 (0)1 64 42 63 17 www.atexis.fr
Attention : All technical data and recommendations concerning the products and services of our firm are for information purposes only. No data given in our technical datasheets guarantee particularproperties to any products. They represent values obtained by experience and are intended as guidelines only. Atexis reserves the right to make alterations in illustrations and technical data printed,resulting from further development.Rev. 07-061/2