STELL SUPPORT CHAIN GG 3000 - 4700
18Pages

{{requestButtons}}

Catalog excerpts

STELL SUPPORT CHAIN GG 3000 - 4700 - 3

STEEL SUPPORT CHAIN GG 3000 - 4700 ADDITIONAL LOAD DRAWING ACCORDING TO CHAIN ITEM STEEL CHAIN FITTINGS STEEL FIXING BRACKETS GG 3010 STEEL FIXING BRACKETS GG 4710 Firing trackels are supplied in installed in many ways.

Open the catalog to page 3
STELL SUPPORT CHAIN GG 3000 - 4700 - 4

Lenght can be obtained as follows 1/2 total distance travelled * 4 bending radius.

Open the catalog to page 4
STELL SUPPORT CHAIN GG 3000 - 4700 - 5

CABLE SUPPORT CHAIN STANDARD FEATURES FOR CHAINS Support chains lor power caves and centos become tod^iy^rn^ioiW«mtitmmlot n)ijsin»lm»chnlooS Thanks K support Chans arm rnatc.hydraukc and electrical leeoSng are now pdss& Cham an made of steel or Mac* PAS gilts nUoroad. m order to obtain long He even •n case of abnormal worhng stress. Temperature range -if C Chains can be mounted m every position Most important chemical resistance are at. petrol and coolants. This rode range ot Items allow to chosse the bast resolution tor width and height. Set up otcaUasi Tubes ncatte support Chan tn order...

Open the catalog to page 5
STELL SUPPORT CHAIN GG 3000 - 4700 - 7

NYLON SUPPORT CHAIN Nylon support chains stable and light, can supply a wide range of solution tor the in- stallation on machine toots. Chain are widely used in most important fields such as machine tools, textile and wood working machines, robots, hoisting and transport processes and movement OPERATING DATA Material: Polimid &XVC300 Add resistant: limited Working temperature: —20* * 120*C Saline water resistant: good Colour black Mineral oil resistant: good Working speed: 120/mtfm' Oil resistant: good Chain are supplied with with fixing brackets. Chain lenght can be easily modified and it...

Open the catalog to page 7
STELL SUPPORT CHAIN GG 3000 - 4700 - 8

CABLE SUPPORT CHAIN GG 1000 - GG 1700 Our nykm chain tOOO is specifically twin lor little automatism as machines lor wood- The chain lenght is made upot finks joined together by release pins. C/ia/n lenght can be obtained as follows: 1/2 total distance travelled * 4 bending radius. ART 1010 Head brackeH&GG '000 ART. 1710 Head bracket kxGG 1701 ART. 1720 ffeadtvac*tf*YGGi7a? NYLON FIXING BRACKETS Fixing brackets can be replaced also in case of mounted chain. ForoflS I lpgmog4 ^'"G brackets are supplied in pieces. I.e. 2 fixing brackets each chafn lenght.

Open the catalog to page 8
STELL SUPPORT CHAIN GG 3000 - 4700 - 9

CABLE SUPPORT CHAIN GG 2600 "U" shaped bottom section. Push in/out removable cover. Chain lenght Is obiaind by links joined together by release pins. It Is possible and easy to change chian lenght or to replace cables also when chain Lenght can be obtained as lotions: 112 total distance travelled * 4 bending radius.

Open the catalog to page 9
STELL SUPPORT CHAIN GG 3000 - 4700 - 10

BENDING RADIUS Separators are needed accor- ding to customer require- ments- They can be fitted du- ring chain installation or later. into chain with as required. STEEL FIXING BRACKETS GG 2610 Fixing brackets are supplied In couples Irlght/left) and can be Installed in many ways. GUIDE CHANNEL DIMENSIONS Chain working standard Is good if chain slides on a MOUNTING/DISMOUNTING SCHEME Bridge pieces can be easly replaced as shown.

Open the catalog to page 10
STELL SUPPORT CHAIN GG 3000 - 4700 - 11

CABLE SUPPORT CHAIN GG 3900 Twice link chain. Top and bottom push in removable cover. Chain GG 3900 consist of two side links connected together both top and bottom with bridge pieces, which determine chain width. Links are joined together by antifiction pins. Chain lenght modification is quick and easy also in case of mounted chain, and It is possible without particular tools. Lenght can be obtained as follows: 1/2 total distance travelled + * bending radius. Tolerance limit */-5% - N. 14 links pro meter

Open the catalog to page 11
STELL SUPPORT CHAIN GG 3000 - 4700 - 12

BENDING RADIUS ni>a moo Rpoa RBBO Separators are needed accor- ding to customer require- ments. They can be fitted du- ring chain installation or later. into chain with as required. "LI" and "LE" widths can be supplied according to custo- mer requirements also with aluminium bridge pieces. ETRIERS OE Tfc"I b STANDARD EN ACIER ART. 39i° ETRIEflS D£ fETE EN AC1FR INOX l «* exncre Oe tele sent foismes par paires (aVoUe-gauchs) et peuvent Aire Instates Indlfferemmenl. GUIDE CHANNEL DIMENSIONS Chain working standard Is good If chain slides on a MOUNTING/DISMOUNTING SCHEME Bridge pieces can be...

Open the catalog to page 12
STELL SUPPORT CHAIN GG 3000 - 4700 - 13

CABLE SUPPORT CHAIN GG 5500 Twice link chain. Top and bottom push in removable cover. Chain GG 5500 consist of two side links connected together both top and bottom with bridge pieces, which determine chain width. Links are joined together by antifiction pins. Chain lenght moditication is quick and easy also in case of mounted chain, and it is possible without particular tools. Lenght can be obtained as follows: 1/2 total distance travelled + 4 bending radius. Tolerance M '1-5% ■ Weigh! 2,5 Kg/ml - N. I! links pro metei.

Open the catalog to page 13
STELL SUPPORT CHAIN GG 3000 - 4700 - 14

BENDING RADIUS Separators are needed accor- ding to customer require- ments. They can be fitted du- ring chain installation or later, Into chain with as required. "LI" and "LE" widths can be supplied according to custo- mer requirements also with aluminium bridge pieces. STEEL FIXING BRACKETS GG 5510 Fixing brackets are supplied in couples (rightfleft) and can be installed in many ways. GUIDE CHANNEL DIMENSIONS Chain working standard is good if chain slides on a MOUNTING/DISMOUNTING SCHEME Bridge pieces can be easly replaced as shown.

Open the catalog to page 14
STELL SUPPORT CHAIN GG 3000 - 4700 - 15

CLOSED CABLE SUPPORT CHAIN GG 2800 Twice link chain. Top and bottom push in removable cover. Chain GG 2800 consul Ol ftw side Units connected together both top and bottom mth Lenght can bo obtained as follows: 1/2 total distance traveled' 4 bendtno radvs Tolerance to* ./*% -N. 14 links pro meter

Open the catalog to page 15
STELL SUPPORT CHAIN GG 3000 - 4700 - 16

BENDING R&DIUS *so BIPO moo RBOO PPBD Separators are needed accor ding 10 customs' requirements They can be titled durmg cham replaced or moved into chain STEEL FIXING BRACKETS GG 2810 Fitmg brackets are supplied m couples fright leitl and can be installed in many ways GUIDE CHANNEL DIMENSIONS Cham working standard '$ good il chain sides on a Hat better to use gwde channel MOUNTING DISMOUNTING SCHEME

Open the catalog to page 16
STELL SUPPORT CHAIN GG 3000 - 4700 - 18

TECHNICAL DATA • MATERIAL: POLYAMIDES 6F100LR • RESISTANCE: Ijod S I. 6,4 mm. 20"C.: K|/m.: 87 • BREAKING LOAD: N/mm.' I9V1I5 • OPERATION TEMPERATURE: -201. I20°C. • ELONGATION: N/mm; I100CV8I00 • TRASUTION SPEED: UOml/l' ON REQUEST STAINLESS STEEL CABLE CHAIN SERIE 4700 H.47mm. I. irnm 75mm. tn lOOmra. BENDING RADIUS AS REQUIREMENTS CHAIN P/N IDENTIFICATION: HEIGHT»WIDTH*RA

Open the catalog to page 18

All ATC PRODUCTION catalogs and technical brochures