PRODIS

®

PD-INC

Digital process meter for incremental sensors

®

position sensors with incremental outputs• Integrated sensor supply • Counting rate up to 250 kHz (<1 MHz edge frequency) • 6-digit LED display • RS-232 interface • Optional 4 comparator outputs • Easy programming PRODIS-INC is designed for use with incremental position sensors to display angles. The fast counter processes 90° phase shifted A,B signals (quadrature signals) for direction and counting information. Sensor excitation is supplied from the meter. With four membrane keys all parameters can be programmed for the special application. An zero signal and a reference signal can be used for calibration of the measurement system. Optional compa-rator functions with 4 NPN open-collector outputs are available, additional 2 of them have relay output.

Description

Display6-digit, 7-segment LED, height 14 mm, decimal point programmableExcitation voltage/current24 V DC ±10%/150 mA, residual ripple 1%

Specifications

ss ;85-250 V AC, 50-60 Hz/180 mA max.Counting frequency250 kHz max., 1 MHz edge frequencySensor excitation24 V DC/300 mA or 5V DC/500 mAInputsA, B, Z, T (reference signal)ConnectionTerminal strip 12-pole, excitation 3-pole Operating temperature -10 ... +40 °C [14 ... +104 °F]Storage temperature-20 ... +85 °C [-4 ... +185 °F]Weight24 V DC: approx. 250 g; 230 V AC: approx. 400 gProtection classFront IP60, rear IP40HumidityMax. 80 % R.H., non condensingComparator outputs (option) Relay NPN250 V AC/5 A, 30 V DC/5 A 24 V max./50 mA to GNDSafety of equipmentDirective 73/23/EWG: DIN EN61010:2002-03EMCDirective 89/336/EWG

Order Code PRODIS-INC

PD-INC

Model nameExcitation voltage 24VDC = 24 V DC 230VAC = 85...250 V AC Sensor excitation voltage G24V = 24 V DC G5V = 5 V DC Sensor signal HTL = HTL level with excitation voltage G24V TTL = TTL level with excitation voltage G5V or G24V Options REL2 = Comparator DT = Desktop version

Order example: PD - INC - 24VDC - G24V - HTL - REL2

44 CAT-PR/PT-E-07 ASM www.asm-sensor.com • For POSIROT