Industrial Automation

Series 501 valve platform Plug-in Electrical connection Subbases Fourfold Joinable Plug-in valve Page X021-04 Pneumatic pad mount High flow 400 l/min ANR With bottom ports

(11 mm) Valves technology Rubber packed all pneumatic functions including double 3/2 Sandwich Accessories Plugged between valve and subbase: Sandwich Speed Control Shut off Blank station plate Pressure regulator + versions ATEX (501) Page X021-31 Multiwire or Fieldbus I/O Modules Multiwire connection Valve manifolds Page X021-04 versions ATEX Page X021-29

Series 503 valve platform M12 Electrical connection Subbases Single Double Joinable Plug-in Electrical connection Side ports Subbases Single Page X021-40-13 Double Joinable Plug-in valve Pneumatic pad mount High flow 1400 l/min ANR With bottom ports

Rubber packed all pneumatic functions including double 3/2 Spool & Sleeve Very high life time > 200 M cycles Sandwich Accessories M12 valve on ISO 15407-1 single subbase Plugged between valve and subbase: Sandwich Exhaust block Speed Control Shut off Blank station plate Pressure block Pressure regulator M12 valves on ISO 15407-1 joinable subbases Page X021-40-13 Valve on ISO 15407-2 single subbase M12 electrical interface on the subbase Page X021-28 (501 & 503) Multiwire or Fieldbus I/O Modules Page X021-04-7 Multiwire connection Valve manifolds

PNEUMATIC VALVE ISLANDS X021 ➠ 501 Series Valve Islands 503 Series Valve Islands 2005 - 2035 Series / ISO 15407-2 18 mm Valve Islands 501 Series Valve Islands, ATEX 503 Series Valve Islands + G3, ATEX 622 Series Valve Islands, ATEX ISO 5599/2 Valve Islands Spool valves, 503 Series, with integrated M12 (ISO 15407-1) or integrated M12 on subbase (ISO 15407-2)

PNEUMATICS VALVE ISLANDS page version (construction type: "plug-in") ATEX execution cabinet mounting main operating pressure (bar) ow at 6 bar l/min (ANR) Quick Selection Chart Pneumatic valve islands, series 501 and 503 w Pneumatic valve islands, series 2005 and 2035 / ISO 14407-2 (18 mm) w w (1) Multipol IP65 Buslink DeviceNetTM, EtherNet/IPTM, Modbus TCP, PROFIBUS-DP, PROFINET, POWERLINK, CANopen®, DeviceLogix, Interbus-S, Ethernet, Fieldbus Foundation, ... PROFIBUS-DP ®, DeviceNetTM CANopen® , Ethernet/IPTM EtherCAT®, PROFINET® Sub-Base Mounted Valves to ISO 5599/2 5/2 - 5/3

501 series FEATURES • High ow rate up to 400 l/min • Wide electrical connection selection : G3 or 580 Fieldbus Electronics, 25 or 37 Pin Sub-D connector, 19 Pin Round connector or Terminal Strip • Internal or external pilot pressure supply capability • Version with integrated LED and electrical protection. LED indicator visible from 3 sides • Solenoid air operated valves for use in potentially explosive atmospheres according to ATEX-Directive 94/9/EC, zone 2 or zones 2-22 • 580 Electronics (See X021-28) GENERAL Operating pressure Ambient temperature range (TS) Rated ow conforming to ISO 6358...

15-DIGIT PRODUCT CODE rated ow response time symbol function type operating pressure port 1 open / closed pilot pressure SPOOL VALVE, RUBBER PACKED TECHNOLOGY, WITH IMPULSE MANUAL OPERATOR 4 W1 closed centre position W2 centre open to pressure 4 2 14 W3 centre open to exhaust (a) All leaets are available on: www.asconumatics.eu X021-04 2 01431GB-2014/R01 Availability, design and specications are subject to change without notice. All rights reserved.

501 series Plug in Valve Dimensions (mm) 501 Series 11 Assembly kits 01431GB-2014/R01 Availability, design and specications are subject to change without notice. All rights reserved. Manifold assembly with G3 Electronics & Discrete I/O (see pages 13 and X021-26) All leaets are available on: www.asconumatics.eu X021-04-3

How to Order Manifold assemblies kit (Electronic + End plate) G Thread connection G = ISO 228/1 8 = NPT (contact us) K = Push-in connectors Options A00 = Standard (no options) MUF = Mufer in End Plates DRM = DIN Rail Mount DWM = DIN Rail Mount with Mufer in End Plates 14X = External pilot supply from port 14 D12 = External pilot supply from port 14 and Mufer in End Plates Product series 501 (11 mm valve) D14 = External pilot supply from port 14 and DIN Rail Mount F06 = External pilot supply from port 14 Mufer in End Plates and DIN Rail Mount Revision letter A = Initial release Electronics 8 =...

Thread connection Product series Revision letter Product type — S4 = Manifold base, 4 stations, side port, single Z-Board™ M4 = Manifold base, 4 stations, side port, double Z-Board™ Wiring option Port connection B = M7 (female thread only) D = 2,7 x 4 mm (5/32) [push-in connector only] (Mid station supply not available) F =4x6 mm [push-in connector only] Plug in Valve Mounted All leaflets are available on: www.asconumatics.eu

Thread connection R = Pad mount Voltage - class F1 = 24 V DC - class F Product series 501 (11 mm valve) Options A00 = With impulse manual operator 11B = With maintained manual operator 11M = Without manual operator Revision letter A = Initial release Actuation 2 = Rubber packed Electrical interface M = Plug-in (with LED indicator / DC) Valve type B = Solenoid pilot Function A = 2x3/2 NO, dual 3-way D = 2x3/2 NC, dual 3-way N = 5/2, Differential air return 1 = 5/2, spring return 4 = 5/2, solenoid air return 5 = 5/3, W3, open center to exhaust 6 = 5/3, W1, center closed 7 = 5/3, W2, open center...

503 series FEATURES • High ow rate up to 1400 l/min • Spool & Sleeve or rubber packed technology in the same dimension body • Wide electrical connection selection : G3 or 580 Fieldbus Electronics, 25 or 37 Pin Sub-D connector, 19 Pin Round connector or Terminal Strip • Internal or external pilot pressure supply capability and compliance with ISO standard 15407-2 26 mm • Solenoid air operated valves which can be mounted on manifold bases • 580 Electronics (See X021-28) GENERAL Operating pressure Ambient temperature range (TS) Rated ow conforming to ISO 6358 Pneumatic base Connection Response time...