catalogue search
P. 01
P. 02
P. 03
P. 04
P. 05
P. 06
P. 07
P. 08
P. 09
P. 10
P. 11
P. 12
P. 13
P. 14
P. 15
P. 16
P. 17
P. 18
P. 19
P. 20
P. 21
P. 22
P. 23
P. 24
P. 25
P. 26
P. 27
P. 28
P. 29
P. 30
P. 31
P. 32
P. 33
P. 34
P. 35
P. 36
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
You may also be interested in
Solenoid, Switch, Sensor, Regulator for compressed air, Vacuum solenoid valve
Text version of the page
| ASCO TRI-POINT switches are available in either a general purpose or watertight enclosure, in addition to open frame construction. These enclosed units are made in accordance with NEMA and UL standards. These standards define the protection level an enclosure gives and the tests it must pass to meet a particular design. General Purpose - Type 1. These enclosures are designed for indoor use to protect personnel from accidental contact with the equipment. P-Series general purpose enclosures are painted, zinc-coated Dimensions (inches) | steel and have a 7/8" diameter hole at the top for electrical entry. Watertight - Type 4. Watertight and dust-tight enclosures are intended for use indoors and outdoors to protect the enclosed equipment against splashing or falling water, windblown dust and water, hose directed water, and severe external condensation. P-Series watertight switch enclosures are epoxy-painted, zinc-coated steel with a 1/2" conduit hub in the side of the lower housing for electrical entry. (For optional 316 SS watertight enclosure see page 13.) | |||||||||||||||||||||||||||||||||||||
| P-Series Pressure (Mounting brackets optional) | ||||||||||||||||||||||||||||||||||||||
| Open Frame PA and PC Switch Units Open Frame PB and PG Switch Units with Transducer Unit with Transducer Unit | ||||||||||||||||||||||||||||||||||||||
| 1.8 | ||||||||||||||||||||||||||||||||||||||
| 233 DIA HOLES FOR MOUNTING WTH #10 (.190 DA.) SCREWS (2 PLACES) | ||||||||||||||||||||||||||||||||||||||
| 2.5 | ||||||||||||||||||||||||||||||||||||||
| 553 | ||||||||||||||||||||||||||||||||||||||
| .3 | ||||||||||||||||||||||||||||||||||||||
| .3 | ||||||||||||||||||||||||||||||||||||||
| 1/4 OR 1/2 NPT | ||||||||||||||||||||||||||||||||||||||
| .08 | ||||||||||||||||||||||||||||||||||||||
| - 1.8-2.5- | ||||||||||||||||||||||||||||||||||||||
| -.233 DIA HOLES FOR MOUNTING WITH #10 (.190 DIA.) SCREWS (2 PLACES) | ||||||||||||||||||||||||||||||||||||||
| .233 DIA. HOLES FOR MOUNTING WITH #10 (.190 DIA.) SCREWS (2 PLACES) | ||||||||||||||||||||||||||||||||||||||
| Type 1 General Purpose Switch Unit with Transducer Unit | ||||||||||||||||||||||||||||||||||||||
| Type 4 Watertight Switch Unit with Transducer Unit | ||||||||||||||||||||||||||||||||||||||
| 9 | ||||||||||||||||||||||||||||||||||||||