ARI tempotal
20Pages

{{requestButtons}}

Catalog excerpts

ARI tempotal - 1

Temperature reglator ARI-TEMPTROL® Thermal closing valve straight through with flanges Fig. 771 ARI-TEMPTROL® LCG Thermal closing valve straight through with screwed sockets without balanced bellow ARI-TEMPTROL® Thermal opening valve straight through with flanges ARI-TEMPTROL® LCG Thermal opening valve straight through with screwed sockets without balanced bellow gh ed throu • Approv ischen Lloyd German ARI-TEMPTROL® Thermal mixing/diverting valve 3-way form with flanges Fig. 773 Edition 05/11 - Data subject to alteration EN cc. to DIN proval a TR910/TW911 p • TÜV-a Reg.-No. 14597 / Features: S • elf-operating (no auxilary power required) • Reliable, low maintenance operation • Over-temperature safety device • Valves pressure balanced with stainless steel bellows • 3 thermal controller sizes for optimal selection of proportional range • Thermal sensors with different time constants • Exact and easy adjustment • Setting range is adjustable • Sensor pocket • Manual control device Data sheet 770001 englisch (english)

Open the catalog to page 1
ARI tempotal - 2

ARI-TEMPTROL® Thermal closing valve Thermal closing valve straight through with flanges Figure Nominal pressure Nominal diameter Selection of possible applications Industrial heating and ventilation systems, residential applications, marked-warehouses, ship building, cooling systems, etc.. (other applications on request) Selection of possible flow media Fluids, air and steam (other flow media on request) Construction LC without balanced bellow Figure Nominal pressure Nominal diameter Fig. ...772 with cooling spacer max. 300°C Edition 05/11 - Data subject to alteration

Open the catalog to page 2
ARI tempotal - 3

ARI-TEMPTROL® Thermal closing valve Standard-flange dimensions refer to page 15. Face-to-face dimension FTF series 1 according to DIN EN 558 Kvs-value DN Reduced Kvs-values Standard Kvs-values Leakage rate IV acc. to DIN EN 1349 (≤ 0,01% from the nominal flow) Max. differential pressure drop Δp DN Straight through Straight through Pressure balancing of the actuator needed: P1 > Δp (e.g. P1=12 bar, Δp=9 bar). For pressure balancing use manual control device (Type 9900390011). Cylinder screw Guide bushing Spindle unit * Pressure piece Cooling spacer Balanced bellow * * Spare part Information...

Open the catalog to page 3
ARI tempotal - 4

ARI-TEMPTROL® LCG Thermal closing valve Thermal closing valve straight through with screwed sockets without balanced bellow Figure Nominal pressure Nominal diameter Selection of possible applications Industrial heating and ventilation systems, residential applications, marked-warehouses, ship building, cooling systems, etc.. (other applications on request) Selection of possible flow media Liquids and Luft (other flow media on request) Nominal pressure Nominal diameter Edition 05/11 - Data subject to alteration

Open the catalog to page 4
ARI tempotal - 5

ARI-TEMPTROL® LCG Thermal closing valve Face-to-face dimension FTF series 1 according to DIN EN 558 Kvs-value DN IV acc. to DIN EN 1349 (≤ 0,01% from the nominal flow) Max. differential pressure drop Δp DN Straight through Straight through Pressure balancing of the actuator needed: P1 > Δp (e.g. P1=12 bar, Δp=9,3 bar). For pressure balancing use manual control device (Type 9900390011). Parts Pos. Description 1 Body 1.2 Seat 3 Cylinder screw 4 Plug * 5 Guide bushing 6 O-ring * 7 Gasket * 8.1 Screw joint 8.2 Retaining ring 8.3 O-ring * 8.4 Bushing 8.5 Washer 8.6 O-ring * 11 Hood 13 Sealing...

Open the catalog to page 5
ARI tempotal - 6

ARI-TEMPTROL® Thermal opening valve Thermal opening valve straight through with flanges Figure Nominal pressure Nominal diameter Selection of possible applications Industrial heating and ventilation systems, residential applications, marked-warehouses, ship building, cooling systems, etc.. (other applications on request) Selection of possible flow media Fluids, air and steam (other flow media on request) Construction LC without balanced bellow Figure Nominal pressure Nominal diameter Edition 05/11 - Data subject to alteration

Open the catalog to page 6
ARI tempotal - 7

ARI-TEMPTROL® Thermal opening valve Standard-flange dimensions refer to page 15. Face-to-face dimension FTF series 1 according to DIN EN 558 Kvs-value 15 Standard Kvs-values Reduced Kvs-values Leakage rate IV acc. to DIN EN 1349 (≤ 0,01% from the nominal flow) Max. differential pressure drop Δp DN Straight through Straight through Pressure balancing of the actuator needed: P1 > Δp (e.g. P1=14 bar, Δp=12 bar). For pressure balancing use manual control device (Type 9900390011). Cylinder screw Plug guiding Guide bushing Spindle unit * Pressure piece Hexagon screw Graphite (with...

Open the catalog to page 7
ARI tempotal - 8

ARI-TEMPTROL® LCG Thermal opening valve Thermal opening valve straight through with screwed sockets without balanced bellow Figure Nominal pressure Nominal diameter Selection of possible applications Industrial heating and ventilation systems, residential applications, marked-warehouses, ship building, cooling systems, etc.. (other applications on request) Selection of possible flow media Fluids, air and steam (other flow media on request) Edition 05/11 - Data subject to alteration

Open the catalog to page 8
ARI tempotal - 9

ARI-TEMPTROL® LCG Thermal opening valve Face-to-face dimension FTF series 1 according to DIN EN 558 Kvs-value DN Leakage rate IV acc. to DIN EN 1349 (≤ 0,01% from the nominal flow) Max. differential pressure drop Δp DN Straight through Parts Pos. Description 1 Body 2 Seat ring 3 Cylinder screw 4 Plug * 6 O-ring * 8.1 Screw joint 8.2 Retaining ring 8.3 O-ring * 8.4 Bushing 8.5 Washer 8.6 O-ring * 11 Hood 13 Sealing ring 14 Stem * 15 Sleeve nut 16 Blind plate 17 Retaining ring 18 O-ring * 19 Pressure piece 21 Hexagon nut 22 Washer 35 Spring plate 36 Spring plate 37 Spring * * Spare parts...

Open the catalog to page 9
ARI tempotal - 10

Thermal mixing/diverting valve Thermal mixing/diverting valve in 3-way form with flanges Figure Nominal pressure Nominal diameter Selection of possible applications Industrial heating and ventilation systems, residential applications, marked-warehouses, ship building, cooling systems, etc.. (other applications on request) Selection of possible flow media Fluids, air and steam (other flow media on request) Mixing function Diverting function Construction LC without balanced bellow Figure Fig. ...773 max. 150°C Nominal pressure Nominal diameter Edition 05/11 - Data subject to alteration

Open the catalog to page 10

All ARI-Armaturen catalogs and technical brochures

  1. STEVI-POS

    2 Pages

  2. ZEDOX HEXO

    5 Pages

  3. STOBU

    2 Pages

  4. FABA

    5 Pages

  5. SAFE Flyer

    2 Pages

  6. CONLIFT

    2 Pages

  7. ARI systems

    2 Pages

  8. SHR

    2 Pages

  9. CONA®B

    2 Pages

  10. ARI SAFE

    36 Pages

  11. ARI PRESO

    4 Pages

  12. 472 series

    24 Pages

Archived catalogs

  1. EURO-WEDI

    2 Pages

  2. PREMIO Plus

    2 Pages

  3. TEMPTROL

    2 Pages

  4. STEVI AS

    6 Pages

  5. ARI-CODI S

    8 Pages

  6. ARI-CONA B

    20 Pages

  7. ARI-Strainer

    6 Pages