Model PS2000 Model FI7000 PS2000 Probe Stand Adjustable to 7.5 ft. Also includes one CL2000 clamp. CL2000 Probe Clamp Extra clamp for PS2000 probe stand. Fiberoptic Cable Sets Available in 10, 50, 100 meters. FI7000 Probe Interface Provides both power and a serialcommunication with the FL7000 and PL7000 series probes. An additional, low-level loop back fiber optic connection is used to sense unexpected disconnect of laser driven fibers to ensure user-safe laser operation.The FI7000 can be used with the FM7004 field Monitor or a PC by direct communication using the USB, GPIB, or RS-232 interfaces. All laser probes require the FI7000 probe interface. 21 4 (Model PL7004) ® Pulse duty: 0.02% to 2% Vices. Manufacturers of connectors and Everything You NeedTo Do The Job Right.IF7000 Fiberoptic/RS-232 Interface Allows for the easy connection of any RS-232 device to glass manufacturers of fiber optic cables, such as a PC to FP7000 and FH7000 field probes. IF7001 Fiberoptic / USB Interface Allows for easy connection of any FP7000 or FH7000 series field probe to a pc with a USB (1.1 or 2.0) port. in.)5.7 x 5.7 x 5.7 cm (2.25 x 2.25 x 2.25 in.)2.92 cm (1.15 in.) DIA spherical housing2.92 cm (1.15 in.) DIA spherical housing2.92 cm (1.15 in.) DIA spherical housing 3 (Model FL7018)Starprobe ® 28.4 x 6.4 x 6.4 cm (11.2 x 2.52 x 2.52 laser powered probe laser powered probe laser powered probe laser powered probe 1 2 3 4 ® ® ® ® 2 (Model FL7006)Starprobe ® Starprobe (Model FL7030) 5 kHz – 30 MHz / 1.5 – 300 V/mRedesigned to meet IEC 6 GHz requirement! Starprobe (Model FL7006) 100 kHz – 6 GHz / 0.5 – 800 V/m The world’s first 18 GHz laser probe! Starprobe (Model FL7018) 3 MHz –18 GHz / 1 – 1000 V/m Starprobe peak measuring probe for pulsed fields (Model PL7004) 800 MHz - 3.6 GHz / 80 - 800 V/m ±1.5 dB, 100 kHz–0.5 MHz, 4.2 GHz–6 GHz±1.8 dB, 8.0 GHz–18 GHzResponse Time/Sampling 20 msec/up to 50 samples per second20 msec/up to 50 samples per second20 msec/up to 50 samples per second20 msec/up to 50 samples per second 1 (Model FL7030)Starprobe ® (with on-axis sensitivity corrections applied)(with on-axis sensitivity corrections applied)±2 dB (8 GHz–18 GHz)(with on-axis sensitivity calibration factors applied)Sensitivity1.5–300 V/m1.2–800 V/m, 100 kHz–0.5 MHz1–1000 V/m80–800 V/m0.5–800 V/m, 0.5 MHz–1 GHzPulse width: 1 to 100 microseconds0.5 – 500 V/m, 1 – 6 GHzPulse period: up to 5 milliseconds between pulses(greater than 200 Hz pulse rate) 3.18 cm (1.25 in.) sensor Radome per axes3.18 cm (1.25 in.) sensor Radome per axes3.18 cm (1.25 in.) sensor Radome per axes Laser Powered Probes Cover The Broadest Frequency Range – 5 kHz to 18 GHz! ® Field ProbesStarprobe Sensor TypeElectric (E) fieldElectric (E) fieldElectric (E) fieldElectric (E) field Probe UseCWCWCWPulseFrequency Response±2.0 dB, 5 kHz–30 MHz±1.5 dB, 0.1 MHz–3 GHzwith calibration factors applied:±2.0 dB, 800 MHz–3.6 GHzwith calibration factors applied:±3.0 dB, 3–6 GHz±1.8 dB, 3 MHz–10 MHzwith calibration factors applied: ±1.0 dB, 5 kHz–30 MHzwith calibration factors applied:±0.5 dB, 10 MHz–200 MHz±1.0 dB, 800 MHz–3.6GHz±1.0 dB, 0.5 MHz–4.2 GHz±1.4 dB, 200 MHz–8 GHz Rate (through FI7000)at FI7000 USB and GPIB onlyat FI7000 USB and GPIB onlyat FI7000 USB and GPIB onlyat FI7000 USB and GPIB onlyIsotropic Deviation±0.5 dB ±0.5 dB, (0.5 MHz–2 GHz)±1 dB (10 MHz–8 GHz)±1 dB (0.25–3.2 GHz) Linearity 1.5–300 V/m/±0.5dB and +0.9V/m 0.5–800 V/m/±0.5dB and ±0.3V/m1–1000 V/m/±0.5dB and ±0.3 V/m 80–800 V/m/±0.5dB Overload1000 V/m continuous field1000 V/m continuous field1600 V/m CW1000 V/m continuous field Data Returned X, Y, Z axes, and compositeX, Y, Z axes, and compositeX, Y, Z axes, and compositeX, Y, Z axes, and composite from Probe Power RequirementLaser powered from FI7000 interfaceLaser powered from FI7000 interfaceLaser powered from FI7000 interfaceLaser powered from FI7000 interfaceDimensions5.7 x 5.7 x 5.7 cm (2.25 x 2.25 x 2.25 in.)5.7 x 5.7 x 5.7 cm (2.25 x 2.25 x 2.25 in.) Weight62.5 g (2.2 oz)62.5 g (2.2 oz)150 g (5.3 oz)62.5 g (2.2 oz)Operating 10–40°C (50–104°F) 10–40°C (50–104°F) 10–40°C (50–104°F) 10–40°C (50–104°F) Temperature Range@ 5–95% RH non-condensing@ 5–95% RH non-condensing@ 5–95% RH non-condensing@ 5–95% RH non-condensing The Competitive Edge in Precision, Power & Selection. The World’s Most Advanced – Most Complete and Most Rugged Line of EMC Field Monitoring Equipment. Starprobe AR has designed & manufactured a highly-advanced line of fieldmonitoring equipment. These E-field laser probes contain an internal microprocessor that enables them to “think” for themselves and adapt to their environment. This provides optimal linearization, temperature compensation, control, and communication functions. And because they’re laser-powered, you never have to replace or recharge batteries. Ruggedized antenna cones and fiberoptic cables provide unequalled reliability. The Most Advanced Laser Powered E-Field Probes on the Planet