High Performance Cooled CCD Camera System ASCENT A8050 - Apogee Imaging Systems - #1

Text version of the page

• 3296 x 2472 array, 5.5 x 5.5 micron pixels • 32 Mbyte SDRAM image buffer • Programmable 16-bit digitization speeds up to 12 Mpixels/sec • USB 2.0 interface: no plug in cards or external controllers • Programmable, intelligent cooling to 40°C below ambient • Binning up to 8 Horizontal x 2472 Vertical • Subarray readout and fast sequencing modes • Programmable offset and gain • External triggering and strobe controls • ActiveX drivers included with every system • Field upgradeable firmware • Fused silica window • Optional C-mount, Nikon F-mount, or 2” slip fit adapter • Optional 6-position filter wheel for 1” / 1.25” / 31mm filters • Single 6V supply • Compact enclosure: 20 oz. (0.57 kg) • Programmable status indicators High Performance Cooled CCD Camera System ASCENT A8050 For complete CCD specifications, including cosmetic grading, see data sheet from manufacturer. • Fluorescence microscopy Imaging Area of CCD The Ascent A8050 has a 8-megapixel format interline transfer sensor with low noise and high quantum efficiency. The camera is available with a monochrome or color sensor. Small pixels are ideal for microscopy. CCD KAI-8050 Array Size (pixels) 3296 x 2472 Pixel Size 5.5 x 5.5 microns Imaging Area 18.1 x 13.6 mm (246.5 mm2) Imaging Diagonal 22.6 mm Video Imager Size 1.4” Linear Full Well (typical) 20K electrons Dynamic Range 64 dB QE at 400 nm (mono) 32% Peak QE (500 nm) 50% Anti-blooming (nominal) 300X 151 N. Sunrise Ave. Ste 902 Roseville CA 95661 USA tel 916 218 7450 fax 916 218 7451 www.ccd.com ©2010 Apogee Imaging Systems Inc. Ascent is a trademark of Apogee Imaging Systems Inc. Specifications subject to change without notice. CCD SPECIFICATIONS (from CCD manufacturer)