Ascent A340 Specifications - Apogee Imaging Systems - #2

Text version of the page

® ASCENT® A340 Camera System Performance PC Interface USB 2.0 USB2 Cable Std.: 5m. Extensions: 5 meters between hubs; 5 hubs maximum (max. total of 30m) Wide variety of extenders available, including fiber optics to 10 km. Digital Resolution 16 bits: 3.3 and 8 Mpixels/sec (single channel); 16 Mpixels/sec (dual 8 MHz) (software selectable) System Noise (typical) 6 e" RMS at 3.3 MHz; 7 e- RMS at 8/16 MHz Pixel Binning 1 x 1 to 8 x 484 on-chip Exposure Time Minimum 100 microseconds; max.183 minutes Image Sequencing 1 to 65535 image sequences under software control Frame Sizes Full frame, subframe, focus mode Cooling (typical) Thermoelectric cooler. Maximum forced air cooling 40°C below ambient temperature. Dark Current (typical) 0.05 eps (-15°C) Temperature Stability ± 0.1°C Camera Head Size Aluminum. 3.2" x 4.7" x 1.3" (8.1 x 11.9 x 3.3 cm) Weight: 1.25 lb. (0.57 kg) Mounting 1.5" x 2.5" bolt pattern, 6-32 thread. Optional C-mount (1" 32 tpi thread), Nikon F-mount, or 2" slip-fit adapters. Back Focal Distance Standard: 0.32" (0.81 cm). [optical] Operating Environment -30°C to 35°C. Relative humidity: 10 to 90% non-condensing. Op.Sys.Support Windows, Linux, Mac OSX Power 20W maximum power with internal shutter open and cooling maximum. AC/DC "brick" supply with int'l AC input plug (100-240V, 50-60 Hz). Alternate 6V input from user's source. Remote Triggering LVTTL input allows exposure to start within 25 microseconds of rising edge of trigger CCDlSENSITiVITY (L> w s a «s -m 60 50 40 30 20 10 0 ____________________________________________j ------il M'i III i^1—- 0000000000000000000000 Wavelength (nm) Apogée IMAGING SYSTEMS 1 N. Sunrise Ave. Ste 902 Roseville CA 95661 USA tel 916 218 7450 fax 916 218 7451 www.ccd.com ©2011 Apogee Imaging Systems Inc. Ascent is a registered trademark of Apogee Imaging Systems Inc. Specifications subject to change without notice.