Catalogs >
AOIP >
SN 8310

SN 8310
7Pages

Catalog excerpts

Benchtop DC voltage and current source standard with high accuracy of 0.002% SN 8310 is a standard DC voltage and current source. It supplies voltages from 100 nV to 110 V and currents from 1 nA to 110 mA with an accuracy of better than 0.002% (20 ppm).

Open the catalog to page 1

Description SN 8310 is a standard DC voltage and current source. It supplies voltages from 100 nV to 110 V and currents from 1 nA to 110 mA with an accuracy of better than 0.002% (20 ppm). It is fully programmable via RS 232 and IEEE 488 (option) interfaces, which makes it the perfect instrument for test benches and automatic test equipment applications. SN 8310 is also available with a battery in option. SN 8310 is offered into a compact benchtop housing for on-site use as well as benchtop or panel mounted use. It is widely used in metrological departments, quality-control departments,...

Open the catalog to page 2

Specifications Specifications and performances in process @23°C ±1°C DC current: Emission Range Emission range Compliance, output impedance, stability, noise data Range Compliance with positive output Compliance Output with impedance negative output (1) Power delivered by instrument is limited to 1.4 W approximately. (2) Maximum output voltage can be limited to 25 V. Temperature Coefficient < 10% accuracy /°C Warm-up time: - 30 s to generate an output within 0.002% of final value - 5 min to get an output within 0.0002% of final value Linearity: < 0.0003% of range Max output voltage: 30 V...

Open the catalog to page 3

Compliance with positive output Compliance Output with impedance negative output (1) Power delivered by instrument is limited to 1.4 W approximately. Temperature Coefficient < 10% accuracy /°C Warm-up time: - 30 s to generate an output within 0.002% of final value - 5 min to get an output within 0.0002% of final value Linearity: < 0.0003% of range Max output voltage: 30 V Possible external supply: ≤ 30 V Overshoot: < 5% Further features Step simulation Manual or automatic generation of user programmable steps Generation of programmed values Emission of 200 calibration values recalled: - Via...

Open the catalog to page 4

Environmental specifications Reference range Operating reference range Limit operating range Storage temperature limits -30°C to +55°C (-15 to +50°C for model with battery charged) Safety specifications Class In accordance with EN 61010-1 Category III, pollution 2 Rated voltage EN 61000-4-4 Conducted and radiated emissions: EN 55022, class B EN 61000-3-2 EN 61000-3-3

Open the catalog to page 5

SN8310-1 DC voltage and current standard generator Delivered in standard with: • Carrying case • Factory test report SN8310-2 DC voltage and current standard generator Delivered in standard with: • Carrying case • Factory test report SN83101-3 DC voltage and current standard generator Delivered in standard with: • Carrying case • Factory test report SN8310-4 DC voltage and current standard generator Delivered in standard with: • Carrying case • Factory test report AN6901 Soft case for benchtop instruments AN5883 Bracket mounting for panel installation (T2 box type) AN5884 Rack mounting kit...

Open the catalog to page 6

Data management software for SN 8310 COFRAC certificate of calibration With all relevant data points where the device has been tested Packing information: Size Weight (gross) 255 x 88 x 310 mm 2 to 3 kg according to the configuration chosen

Open the catalog to page 7

SN 8310 7Pages

Catalog excerpts

All AOIP catalogs and technical brochures

SN 8310
7Pages