RheolabQC: Rotational Rheometer for Quality Control - 6 Pages

Add to MyDirectIndustry favorites
RheolabQC: Rotational Rheometer for Quality Control

Catalog excerpts

Rotational Rheometer for Quality Control RheolabQC

 Open the catalog to page 1

Viscosity measurement and rheological checks for quality control are made routine and easy From a quick single-point check to complex rheological investigations: RheolabQC sets new standards for carrying out routine rheological tests. RheolabQC is based on the newest and most innovative technologies used in R&D rheometers. It provides unrivaled performance combined with very easy operation and robust design. This powerful QC rheometer is an excellent example of a modern measuring instrument which uses all the technical possibilities available to ensure flexible, reliable and...

 Open the catalog to page 2

Operation - choose between simple and demanding Manual operation RheolabQC can be operated either via the robust keypad or via an external keyboard which is connected to the PS/2 interface. There is an illuminated, easy-to-read display for selecting the measuring parameters and showing the relevant properties. The internal memory has storage capacity for over 100 predefined measuring profiles and over 50 000 measuring points in more than 100 measurement series. The data can be read out by a software program immediately, stored for reading out later, or sent to a connected printer. Software...

 Open the catalog to page 3

The Toolmaster™ RheolabQC includes Toolmaster™, the first automatic component recognition and configuration system. All measuring geometries are automatically recognized by the instrument. This information is taken into consideration when carrying out manual measurements. With computer-controlled measurements, the information is read into the software as soon as the geometry is connected to the instrument. This rules out errors which occur when using an incorrect geometry or selecting the wrong geometry in the software. RheolabQC can be used for a wide variety of applications: The measuring...

 Open the catalog to page 4

RheolabQC is available in two basic configurations: 1. RheolabQC plus Peltier temperature device (C-PTD 180/AIR/QC) or liquid temperature device (C-LTD 80/QC) with a water bath thermostat for exact temperature control of the measuring cup and the sample. This configuration consists of: 4 Rheometer RheolabQC 4 Stand 4 Temperature device C-PTD 180/AIR/QC or C-LTD 80/QC incl. temperature sensor (Pt100) 4 Measuring system as required (e.g. CC39/ QC-LTD) 2. RheolabQC „immersion model“ for measurements under ambient conditions without a temperature control system or for immersing the measuring...

 Open the catalog to page 5

© 2016 Anton Paar GmbH | All rights reserved. Specifications subject to change without notice. C04IP001EN-I

 Open the catalog to page 6

All Anton Paar catalogs and technical brochures

  1. Tribometers

    7 Pages

  2. TTK 600

    2 Pages

  3. ViscoQC

    2 Pages

  4. Vstar

    8 Pages

  5. Monowave 400

    2 Pages

  6. AP Stage Mover

    2 Pages

  7. Snap 51

    2 Pages

  8. Snap 41

    1 Pages

  9. Anton paar

    3 Pages

  10. Multiwave Go

    8 Pages

  11. SAXSpoint 2.0

    16 Pages

  12. RheoSAXS

    3 Pages

  13. General Catalog

    31 Pages

  14. Cobrix 2600

    3 Pages

  15. DHS 1100

    2 Pages

  16. Abbemat T-Check

    2 Pages

  17. Tribometer

    7 Pages

  18. Alex 500

    6 Pages

  19. PSA Series

    8 Pages

  20. SmartPave

    12 Pages

  21. Alcolyzer ME

    2 Pages

  22. Propol

    2 Pages

  23. Alex 500 Wine

    6 Pages

  24. PetroOxy

    2 Pages

  25. PM 4

    2 Pages

  26. CLA 5

    2 Pages

  27. ADU 5

    2 Pages

  28. ABA 4

    2 Pages

  29. Foam Tester

    2 Pages

  30. PNR 12

    2 Pages

  31. BPA 5

    2 Pages

  32. Alex 500

    2 Pages

  33. OBA 2

    2 Pages

  34. TOST & TOO

    2 Pages

  35. OBA 1

    2 Pages

  36. DD 3

    2 Pages

  37. Grease Worker

    2 Pages

  38. DDA 3

    2 Pages