FRS High Temperature Rheometer Systems FRS 1600 and FRS 1800 - 6 Pages

Add to MyDirectIndustry favorites
FRS High Temperature Rheometer Systems FRS 1600 and FRS 1800

Catalog excerpts

Furnace Rheometer Systems

 Open the catalog to page 1

Rheological measurements at high temperatures FRS – Furnace Rheometer Systems Materials of regular use in everyday life, such as glasses, ceramics, and metals are processed or refined as melts at temperatures above 1000 °C. By determining the melt viscosity of these materials with the FRS, a consistent high quality of the final product and an optimization of the energy-intensive production process can be ensured. Furthermore, this system opens up new ways in R&D of materials with a high melting point. The Furnace Rheometer Systems each combine a rheometer and a lab furnace for viscosity...

 Open the catalog to page 2

FRS provides solutions for the following industries Metal industry: metals, slags, and coal ash Glass industry Ceramic industry Mining industry Volcanology (research) Your benefits Highest safety and easy sample loading The setup The Furnace Rheometer Systems consist of a lab furnace (Carbolite) and the DSR 502 rheometer head, which features the established EC motor and air-bearing technology of the MCR rheometer series. The system is airand water-cooled to ensure a constant sample temperature. The combination of pneumatic pre-positioning and the stepper-motor-driven fine positioning...

 Open the catalog to page 3

Normal force control for detecting the melting point ©Measurements under inert gas atmosphere Compliance with the international standards ASTM C1276, ASTM C965, and ISO 7884-2 1 L Pneumatic lift down to preheating position Electric lift down to measuring position 25 years of experience in one motor - you only get this with rheometers from Anton Paar. The air-bearing-supported synchronous EC motor deploys a frictionless synchronous movement of the rotor inside which enables the most sensitive and therefore most precise movements in rotational and oscillatory mode - for accurate...

 Open the catalog to page 4

Maximum torque    mNm Minimum torque, rotation    nNm Minimum torque, oscillation    nNm Viscosity range    Pa.s Minimum angular velocity    rad/s Maximum angular velocity    rad/s Maximum speed measuring head    1/min Minimum angular frequency    rad/s Maximum angular frequency    rad/s Normal force range    N Oven temperature range    °C Minimum sample temperature    °C Maximum sample temperature    °C Temperature gradient optimized    - Temperature resolution    °C Inert gas atmosphere possible    - Dimensions    mm Measuring system material    - Measuring system rotor diameter    mm...

 Open the catalog to page 5

© 2017 Anton Paar GmbH | All rights reserved. Specifications subject to change without notice. B78IP001EN-F

 Open the catalog to page 6

All Anton Paar catalogs and technical brochures

  1. Tribometers

    7 Pages

  2. TTK 600

    2 Pages

  3. ViscoQC

    2 Pages

  4. Vstar

    8 Pages

  5. Monowave 400

    2 Pages

  6. AP Stage Mover

    2 Pages

  7. Snap 51

    2 Pages

  8. Snap 41

    1 Pages

  9. Anton paar

    3 Pages

  10. Multiwave Go

    8 Pages

  11. SAXSpoint 2.0

    16 Pages

  12. RheoSAXS

    3 Pages

  13. General Catalog

    31 Pages

  14. Cobrix 2600

    3 Pages

  15. DHS 1100

    2 Pages

  16. Abbemat T-Check

    2 Pages

  17. Tribometer

    7 Pages

  18. Alex 500

    6 Pages

  19. PSA Series

    8 Pages

  20. SmartPave

    12 Pages

  21. Alcolyzer ME

    2 Pages

  22. Propol

    2 Pages

  23. Alex 500 Wine

    6 Pages

  24. PetroOxy

    2 Pages

  25. PM 4

    2 Pages

  26. CLA 5

    2 Pages

  27. ADU 5

    2 Pages

  28. ABA 4

    2 Pages

  29. Foam Tester

    2 Pages

  30. PNR 12

    2 Pages

  31. BPA 5

    2 Pages

  32. Alex 500

    2 Pages

  33. OBA 2

    2 Pages

  34. TOST & TOO

    2 Pages

  35. OBA 1

    2 Pages

  36. DD 3

    2 Pages

  37. Grease Worker

    2 Pages

  38. DDA 3

    2 Pages