1. Catalogs
  2. ANSYS
  3. ANSYS 17.0 Capabilities
video corpo

ANSYS 17.0 Capabilities

ANSYS 17.0 Capabilities
1 / 19 PagesView full catalog

ANSYS 17.0 Capabilities

Product catalog summary
ANSYS 17.0 Capabilities Overview

Structures: ANSYS 17.0 provides extensive structural analysis capabilities, including static and buckling strength analysis, geometric nonlinearity, and various material models such as linear, plasticity, hyperelasticity, viscoelasticity, and creep. It supports bonded, pretension, joints, and nonlinear contact modeling, as well as vibration analysis including modal, spectrum, harmonic, and random vibration. Advanced features include substructuring, cyclic symmetry analysis, and adaptive remeshing.

Thermal: The software supports conduction, convection, radiation, and phase change analysis in both steady-state and transient conditions, along with motion analysis, impact, and durability studies.

Multiphysics: ANSYS 17.0 integrates platform technologies for advanced data exchange and collaborative workflows, supporting fluid-structure interaction, electro-thermal interaction, and other coupled interactions like vibro-acoustics and electromagnetic-thermal.

Fluids: The software offers solver capabilities for steady-state and transient flow, 2D and 3D flow, and a customizable materials library. It supports incompressible, compressible, and non-Newtonian flows, as well as turbulence modeling and heat transfer capabilities including natural convection, conduction, and radiation.

Electronics: ANSYS 17.0 provides low and high-frequency electromagnetics analysis, including electrostatics, magnetostatics, and advanced magnetic modeling. It supports power and signal integrity analysis, RLCG parasitic extraction, and electronics cooling with multi-mode heat transfer.

Semiconductor: The software offers integrated circuit reliability analysis, including static and dynamic power EM analysis, signal EM analysis, and temperature-dependent EM analysis, with support for foundry-certified EM rules and self-heat calculation for advanced nodes.

Overview: The document provides a comprehensive overview of ANSYS software capabilities, focusing on engineering simulation and analysis tools for electronic design, power analysis, geometry modeling, and embedded software systems.

ESD Analysis: The document outlines capabilities for Electrostatic Discharge (ESD) analysis, including connectivity and resistance checks, and covers Human Body Model (HBM), Machine Model (MM), and Charged Device Model (CDM) ESD analysis.

Power Analysis: ANSYS provides tools for power efficiency analysis, including RTL inference-based power analysis and simulation-based methods. It details techniques for identifying power hotspots and UPF/CPF-based exploration of power domains.

Geometry Modeling: ANSYS's capabilities in geometry modeling include model preparation for CAE, editing designs, simplifying geometry, and creating parameters for optimization.

Embedded Software Systems: ANSYS supports virtual systems prototyping, model-based systems engineering, and embedded control software development.

Certification and Verification: The document mentions formal verification, timing and stack optimization, and certified code generation for standards like DO-178C, EN 50128, ISO 26262, and IEC 61508.

Conclusion: ANSYS software is crucial in product development, offering a broad portfolio of engineering simulation tools to solve complex design challenges, emphasizing innovation and engineering excellence.
See more

Catalog excerpts

ANSYS 17.0 Capabilities-11

Fully Supported Limited Capability p= Requires more than 1 product ANSYS SIwave-DC SIwave-PI HFSS Passive Excitation Plane Resonance l Analysis Driven Excitation Plane Resonance l Analysis Automated Decoupling Analysis l Capacitor Loop Inductance Analysis l AC SYZ Analysis - PI, SI, & EMI l l Dynamically Linked Electromagnetic l l Field Solvers Chip, Package, PCB Analysis (CPM) l l HPC SYZ Speed Up l l Near-Field EMI Analysis Far-Field EMI Analysis Characteristic Impedance (Zo) PKG/PCB Scan Full PCB/PKG Cross-talk Scanning TDR Analysis l Transient IBIS Circuit Analysis SerDes IBIS-AMI Circuit...

 Open the catalog to page 11
ANSYS 17.0 Capabilities-12

Fully Supported Limited Capability p= Requires more than 1 product ANSYS SIwave-DC SIwave-PI HFSS ANSYS Q3D Extractor SIwave ANSYS Icepak Reduced RLCG Matrix Operations l SPICE equivalent Modeling Export l DCRL & ACRL Joule Heating Analysis l with Icepak Macro-modeling (Network Data Explorer) l 2D Transmission Line Modeling Toolkit l 2D Cable Modeling Toolkit l Electronics Cooling Multi-mode Heat Transfer l Steady-state and Transient l CFD Analysis l Turbulent Heat Transfer l Multiple-fluid Analysis l Species Transport l Solar Loading l Reduced Order Flow and Thermal l Network Modeling l Joule...

 Open the catalog to page 12
ANSYS 17.0 Capabilities-14

Fully Supported Limited Capability p= Requires more than 1 product Pathfinder Totem Block-level Data and Clock Gating l Opportunity Identification 15 Clock, Memory and Logic Power l Reduction Techniques Power Reduction Opportunity Identification for Clock, Memory l and Logic Peak and di/dt Cycle Selection l from FSDB RTL Power Driven Early Chip and l Package Power Grid Planning Standard Power Metrics Reporting l Tcl Based UI to OADB Power l Database for Custom Reports On/Off State Power Leakage Analysis l Voltage Island Ramp-up / Ramp-down Analysis In-Rush Current Analysis Driver / Receiver Hot-Pair...

 Open the catalog to page 14
ANSYS 17.0 Capabilities-15

Fully Supported Limited Capability p= Requires more than 1 product SYSTEMS & EMBEDDED SOFTWARE Virtual Systems Prototyping Integrated Graphical Modeling Environment Standard Modeling Languages and Exchange Formats Extensive Model Libraries Reduced Order Modeling (ROM) Power Electronic Device And Module Characterization Model Import Interfaces Rapid Prototyping Modelica Library Integration Model-based Systems Engineering Model-Based System Design Functional Decomposition Architecture Decomposition Allocation Of Functions To Components Model Checks System Model Diff/Merge System / Software Bi-Directional...

 Open the catalog to page 15
ANSYS 17.0 Capabilities-16

Fully Supported Limited Capability p= Requires more than 1 product ANSYS Simplorer ANSYS SCADE ANSYS SCADE ANSYS SCADE System Suite Display Formal Verification l Timing And Stack Optimization l Worst Case Execution Time Estimates l On Target Verification Of Stack Space Requirements l Certified Code Generation For DO-178C, l EN 50128, ISO 26262, IEC 61508 Certification Kits For DO-178C, l EN50128, ISO 26262, IEC 61508 Man-Machine Interface Software Model-Based Prototyping And Specification Of MMIs Support Of OpenGl, OpenGl SC and OpenGL ES Integration In To Configuration Management Environment...

 Open the catalog to page 16
ANSYS 17.0 Capabilities-18

Fully Supported Limited Capability p= Requires more than 1 product ANSYS Enterprise ANSYS Design Modeler Use Cut, Copy, Paste, etc for fast l l ideation from existing designs Enable 2d and 3D communication and collaboration with 3D Markup, l l Dimensions, and Drawing tools Create BOM to evaluate weights and l l lengths for cost calculations Make real-time edits with customers l l in LiveReview Use automated tools to repair l l l dirty geometry Use top down or bottom up l l l modeling Create 2D drawings l l Import and edit large assemblies l l ANSYS SpaceClaim Direct Modeler l

 Open the catalog to page 18
ANSYS 17.0 Capabilities-19

ANSYS, Inc. ANSYS, Inc. Southpointe 2600 ANSYS Drive Canonsburg, PA 15317 U.S.A. 724.746.3304 [email protected] If you’ve ever seen a rocket launch, flown on an airplane, driven a car, used a computer, touched a mobile device, crossed a bridge or put on wearable technology, chances are you’ve used a product where ANSYS software played a critical role in its creation. ANSYS is the global leader in engineering simulation. We help the world’s most innovative companies deliver radically better products to their customers. By offering the best and broadest portfolio of engineering simulation software,...

 Open the catalog to page 19
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.