Electronic Measuring Instruments Catalog 2007 - Anritsu - #651

Standard connector type

N female

Optional connector types

3.5 mm female, 3.5 mm male, GPC-7, N male

Measurement port characteristics

Connector

Configuration

Frequency (MHz)

Directivity (dB)

Source match

(dB)

Load match

(dB)

3.5 mm (MS4600/11S) (MS4600/11SF)

Ports 1 and 2 MS462xB MS462xD

10 to 1000 1000 to 3000 3000 to 6000 6000 to 9000

>46 >44 >38 >37

>44 >41 >39 >36

>46 >44 >38 >37

Ports 3 and 4 MS462xB/Opt3x MS462xD

10 to 1000

1000 to 3000 3000 to 6000 6000 to 9000

>44

>42 >37

>36

>42 >40 >37

>35

>44 >42 >37 >36

N-Type Standard N(F) (MS4600/11NM)

Ports 1 and 2

MS462xB MS462xD

10 to 1000

1000 to 3000 3000 to 6000

6000 to 9000

>46

>44 >38

>37

>44 >41 >39

>36

>46 >44 >38

>37

Ports 3 and 4

MS462xB/Opt3x MS462xD

10 to 1000

1000 to 3000 3000 to 6000 6000 to 9000

>44

>42 >37 >36

>42 >40 >37 >35

>44 >42 >37 >36

GPC-7

(MS4600/11A)

Ports 1 and 2

MS462xB MS462xD

10 to 1000

1000 to 3000 3000 to 6000 6000 to 9000

>46

>44 >38

>37

>44 >41 >39 >36

>46 >44 >38 >37

Ports 3 and 4

MS462xB/Opt3x MS462xD

10 to 1000

1000 to 3000 3000 to 6000 6000 to 9000

>44

>42 >37 >36

>42 >40 >37 >35

>44 >42 >37 >36

Frequency range

MS4622A/B/D, 10 MHz to 3 GHz MS4623A/B/D, 10 MHz to 6 GHz MS4624A/B/D, 10 MHz to 9 GHz

Frequency resolution

1Hz

Frequency stability (with internal time base) - aging

<5x10^-6 / year

Temperature

<5x10^-6over +15°C to +50°C

Power output range

MS4622A Transmission/Reflection Test Set +10 to -85 dBm MS4622B Active Reversing Test Set +10 to -85 dBm MS4622B (Opt 3) w/ 2nd Source, 3rd Test Port & S/A. +10 to -85 dBm MS4622B (Opt 4) w/ Noise Figure +7 to -85 dBm MS4622B (Opt 6) w/ 3rd Test Port +10 to -85 dBm MS4622D Balanced/Differential 4-Port +10 to -85 dBm

MS4623A Transmission/Reflection Test Set +10 to -85 dBm

MS4623B Active Reversing Test Set +7 to -85 dBm

MS4623B (Opt 3) w/ 2nd Source, 3rd Test Port & S/A +7 to -85 dBm MS4623B (Opt 4) w/ Noise Figure (3 GHz only) +5 to -85 dBm MS4623B (Opt 6) w/ 3rd Test Port +7 to -85 dBm MS4623D Balanced/Differential 4-Port +7 to -85 dBm

MS4624A Transmission/Reflection Test Set +10 to -85 dBm

MS4624B Active Reversing Test Set +7 to -85 dBm

MS4624B (Opt 3) w/ 2nd Source, 3rd Test Port & S/A +7 to -85 dBm MS4624B (Opt 6) w/ 3rd Test Port +7 to -85 dBm

MS4624D Balanced/Differential 4-Port +7 to -85 dBm

Power control range

> 20 dB. The minimum absolute level for power sweep is -15 dBm while the maximum power output for a unit is +10 dBm.

Source power level

The source power (dBm) may be set from the front panel menu or via GPIB. Port 1 power level is settable from +10 dBm (on the simpler test sets, ranging to +5 dBm on the most complex) to -15 dBm with 0.01 dB resolution. In addition, the Port 1 (& Port 3) power may be attenuated in 10 dB steps using the internal 70 dB step attenuator. Port 3 step attenuator is not available in D models. Port 1 step attenuator is optional in A models.

Power level accuracy

±1 dB to 6 GHz, ±1.5 dB to 9 GHz (no flat power calibration applied; full-band frequency sweep at -15 dBm, 0 dBm, and maximum rated power).

Level test port power

The power at all sweep frequencies is leveled to within ±1 dB. Only port 1 and port 3 (if installed) can be externally leveled.

Harmonics and spurious

<-30 dBc at maximum rated power (MS4622x and MS4623x) <-25 dBc at maximum rated power (MS4624x)

Sweep type

Linear, CW, Marker, or N-Discrete point sweep

Power sweep range

20 dB (minimum)

Source #2

(optional)

Frequency range

10 MHz to 3 GHz (6 GHz or 9 GHz)

Frequency resolution

1Hz

Power level accuracy

±1 dB to 6 GHz, ±1.5 dB to 9 GHz (no flat power calibration applied; full-band frequency sweep at -15 dBm, 0 dBm, and maximum rated power).

Harmonics and spurious

<-30 dBc at maximum rated power (MS4622x and MS4623x) <-25 dBc at maximum rated power (MS4624x)

Sweep type

Linear, CW, Marker, or N-Discrete point sweep

Power sweep range

20 dB (minimum)