Text version of the page

RF MICROWAVE MEASURING INSTRUMENTS

Template: Inputs in upper/lower limit of frequency, judged on GO/NO-GOFunctionsFrequency offset: +offset, –offset, ppmStatistical processing: mean, maximum, minimum, p-p Save/recall: 10 panel settings (Max.) AUX outputOutput for GO/NO-GO, count end, input level detection, internal gating, restart, and acquisition signal Sample rate 1 ms to 10 s (1-2-5 steps), hold High-speed sample period/INPUT 1: 10 µs/10 kHz, 100 µs/1 kHz, 1 ms/100 Hz frequency resolutionINPUT 2: 10 µs/100 kHz, 100 µs/10 kHz, 1 ms/1 kHz

∗

Measurement frequency: 100 MHz Memory back upStore in non-volatile memory at instrument power-down Display digits: 12 digits and 1 digit (– mark)DisplayLCD: 248 x 60 dots (with back light) Frequency: 10 MHz Warm-up: ≤ ±5 x 10
–8 /day (after 30 min. warm-up)Reference crystal oscillatorAging rate: ≤ ±2 x 10
–8 /day (after 24 h warm-up)Temperature characteristics: ±5 x 10
–8 (0 to +50 ËšC) External reference input1/2/5/10 MHz, Input voltage: 1 to 5 Vp-p (AC coupling), Input impedance: ≥ 1 k Ω External reference output1/2/5/10 MHz
∗ 6 , Output voltage: ≥ 2 Vp-p (open end, AC coupling), Output impedance: ≤ 400 Ω External controlGPIB (conforms to IEEE488.2 standards): SH1, AH1, T5, L4, SR1, RL1, PP0, DC1, DT1, C0, E2 Power85 to 132/170 to 250 V (auto switch), 47.5 to 63 Hz, ≤ 90 VA MAX. Operating temperature0 to +50 ˚C Dimensions and mass 213 (W) x 88 (H) x 350 (D) mm, ≤ 5 kg EN61326: 1997/A2: 2001 (Class A)EMCEN61000-3-2: 2000 (Class A)EN61326: 1997/A2: 2001 (Annex A) LVDEN61010-1: 2001 (Pollution Degree 2)

∗

1: Delay time until counter started by trigger detection

∗

4: Measurement frequency (GHz)/10 count (rms)

∗

2: MANUAL measurement mode

∗

5: Measurement frequency (GHz)/2 count (rms)

∗

3: f
R ; frequency resolution, TGW; gate width, Ts; processing time (50 µs),T; period (2/f

∗

6: 10 MHz when using internal reference signal; outputs signal based onthis signal (1/2/5/10 MHz) when using external reference signal
R )

?

Options 01/02/03: Crystal oscillator

Option number010203 Frequency10 MHz 5 x 10
–9 /day, 5 x 10
–8 /month, 7.5 x 10
–8 /year2 x 10
–9 /day, 3 x 10
–8 /month, 4.5 x 10
–8 /year 5 x 10
–10 /day, 1 x 10
–8 /month, 1.5 x 10
–8 /year Aging rate

∗

After power on, with reference to frequency

∗

After power on, with reference to frequency

∗

After power on, with reference to frequencyafter 24 hafter 24 hafter 48 h Temperature±5 x 10
–8 ±1.5 x 10
–8 ±5 x 10
–9 characteristics–10 to +60ËšC (with reference to +25ËšC)

Ordering information

Please specify model/order number, name, and quantity when ordering.

Model/order No. Name Model/order No. Name Main frame Optional accessories MF2412B Microwave Frequency Counter MF2413B Microwave Frequency Counter MF2414B Microwave Frequency Counter Standard accessories K224B
∗ 1 Coaxial adapter (K-P · K-J, SMA compatible, DC to 40 GHz, SWR: 1.2)34RKNF50Coaxial adapter (ruggedized K-P · N-J, DC to 20 GHz, SWR: 1.25)J0060Coaxial adapter (N-J · SMA-P)J0526Coaxial adapter (N-J · SMA-J)J0527Coaxial cord (K-P · K-P), 2 ft J0127ACoaxial cord (BNC-P · RG-58A/U · BNC-P), 1 m J0853Coaxial cord (N-P · SF104P · N-P), 2 m J0854Coaxial cord (APC3.5-P · SF104P · APC3.5-P), 2 m MP612A Power cord, 2.5 m:1 pcF0012Fuse, 3.15 A:2 pcs W1520AE MF2412B/2413B/2414B operation manual: 1 copy Options MF2412B-01Crystal oscillator (5 x 10
–9 /day)MF2413B-01Crystal oscillator (5 x 10
∗ 2 Fuse Holder (N-P · N-J, DC to 1 GHz)MP613A ≥ +35 dBm)J0007GPIB cable, 1 mJ0008GPIB cable, 2 mB0426ACarrying bag (soft type) B0409Carrying case (with B0329L protection cover)B0329LProtection coverB0390GRack mount kit (19 inch type, one unit)B0411ARack mount kit (19 inch type, two units, side by side)
–9 /day)MF2414B-01Crystal oscillator (5 x 10
∗ 2 Fuse Element (DC to 1 GHz, Power rating: +17 dBm, Blow rating:
–9 /day)MF2412B-02Crystal oscillator (2 x 10
–9 /day)MF2413B-02Crystal oscillator (2 x 10
–9 /day)MF2414B-02Crystal oscillator (2 x 10
–9 /day)MF2412B-03Crystal oscillator (5 x 10
–10 /day)MF2413B-03Crystal oscillator (5 x 10
–10 /day)MF2414B-03Crystal oscillator (5 x 10
–10 /day) Maintenance serivce MF2412B-90Extended three year warranty service MF2412B-91Extended five year warranty serviceMF2413B-90Extended three year warranty serviceMF2413B-91Extended five year warranty service MF2414B-90Extended three year warranty service MF2414B-91Extended five year warranty service

∗

1: The K224 adapter is used to prevent damage to the input connector.

∗

2: The MF2400B series has the MP612A Fuse Holder (with MP613A FuseElement) to prevent input of excessive power. In addition, the MP612AFuse Holder has an N-type connector, so an adapter is required according to the coupled connector type.

http://www.anritsu.com 586